International Harvester 140 VS Denning E 10-18 specs comparison
International Harvester 140
General Infos| Make | International Harvester |
| Model | 140 |
| Country | United states |
| Production | From 1958 Until 1979 |
| Price | - |
| Tractor type | - |
| Fuel | gasoline |
| Service repair manual | International Harvester 140 Manual |
Dimensions, sizes and tires
| AG front tires | 6.00-16 |
| AG rear tires | 11.2-24 |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | - |
| Indus rear tires | - |
| Weight | 2700 lbs or 1224 kg |
| Length | 107 inches [271 cm] |
| Width | 56 inches [142 cm] |
| Height | - |
| Wheelbase | 71 inches [180 cm] |
| Ground clearance | 22.3 inches [56 cm] |
| Turning radius | - |
| Rear tread size | 40 to 68 inches |
| Front tread size | 40 to 58 inches |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 122.7 ci or 2.0 L |
| Cylinders | 4 cylinders |
| Engine power | 25 hp or 18.6 kW |
| Engine RPM | 1400 (rpm) |
| Torque | 106 lb-ft or 143.7 Nm | Torque RPM | 1400 (rpm) |
| Fuel type | gasoline |
| Fuel injection | - |
| Fuel tank size | 11 gal or 41.6 L |
| Oil capacity | 5 qts or 4.7 L |
| Oil change | - |
| Starter motor | - |
| Starter volts | 6 V |
| Parts And Accessories | International Harvester 140 Parts |
| Batteries number | 1 |
| Batteries voltage | 6 V |
| Battries Amps | - |
| Cold Amps | - |
| Ground force | positive |
| Charging system | generator (early) |
| Charging Volts | - |
| Charging Amps | - |
| Trans system | - |
| Trans type | sliding gear |
| Trans gears | 4 forward and 1 reverse |
| Clutch system | single 9-inch dry disc |
| Wheel drive | 4x2 2WD |
| Final drive | - |
| Steering | manual worm-and-sector |
| Braking system | differential mechanical contracting band |
| Cabin type | Open operator station |
| Differentiel lock | - |
| System | IH Touch-Control |
| Valves | - |
| Pump flow | - |
| SVC flow | - |
| Steering flow | - |
| Tank capacity | 3.38 gal or 12.8 L |
| Hydraulic pressure | - |
| Max flow | 4.6 gpm or 17.4 lpm |
| Drawbar type | - |
| Claimed power | - |
| Drawbar horsepower | 21.25 hp or 15.8 kW |
| Fuel consumption | 2.0 gal/hour or 7.6 l/hour |
| Pulling power | 3,611 lbs or 1637 kg |
| Claimed power | 21 hp or 15.7 kW |
| Real power | - |
| Engine @RPM | - |
| PTO Clutch | - |
| Rear PTO | transmission |
| Rear PTO RPM | 540 (rpm) |
| Front PTO | - |
| Front PTO RPM | - |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | - |
| Hitch system | - |
| Rear hitch | - |
| Rear hitch lift | - |
| Front hitch | - |
| Front hitch lift | - |
Denning E 10-18
General Infos| Make | Denning |
| Model | E 10-18 |
| Country | United states |
| Production | From 1916 Until 1918 |
| Price | - |
| Tractor type | Standard tread tractor |
| Fuel | gasoline |
| Service repair manual | Denning E 10-18 Manual |
Dimensions, sizes and tires
| AG front tires | - |
| AG rear tires | 46x10 steel |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | - |
| Indus rear tires | - |
| Weight | 3600 lbs or 1632 kg |
| Length | 120 inches [304 cm] |
| Width | 56 inches [142 cm] |
| Height | 61 inches [154 cm] |
| Wheelbase | - |
| Ground clearance | - |
| Turning radius | - |
| Rear tread size | - |
| Front tread size | - |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 202 ci or 3.3 L |
| Cylinders | 4 cylinders |
| Engine power | - |
| Engine RPM | 1200 (rpm) |
| Torque | - | Torque RPM | - |
| Fuel type | gasoline |
| Fuel injection | - |
| Fuel tank size | 15 gal or 56.8 L |
| Oil capacity | - |
| Oil change | - |
| Starter motor | - |
| Starter volts | - |
| Parts And Accessories | Denning E 10-18 Parts |
| Batteries number | - |
| Batteries voltage | - |
| Battries Amps | - |
| Cold Amps | - |
| Ground force | - |
| Charging system | - |
| Charging Volts | - |
| Charging Amps | - |
| Trans system | - |
| Trans type | friction disc |
| Trans gears | 6 forward and reverse |
| Clutch system | - |
| Wheel drive | 4x2 2WD |
| Final drive | - |
| Steering | manual |
| Braking system | - |
| Cabin type | Open operator station |
| Differentiel lock | - |
| System | - |
| Valves | - |
| Pump flow | - |
| SVC flow | - |
| Steering flow | - |
| Tank capacity | - |
| Hydraulic pressure | - |
| Max flow | - |
| Drawbar type | - |
| Claimed power | 10 hp or 7.5 kW |
| Drawbar horsepower | - |
| Fuel consumption | - |
| Pulling power | - |
| Claimed power | - |
| Real power | - |
| Engine @RPM | - |
| PTO Clutch | - |
| Rear PTO | - |
| Rear PTO RPM | - |
| Front PTO | - |
| Front PTO RPM | - |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | - |
| Hitch system | - |
| Rear hitch | - |
| Rear hitch lift | - |
| Front hitch | - |
| Front hitch lift | - |
Related tractor comparison
International Harvester 140 Pioneer Tractor Junior
Denning E 10-18 Allis Chalmers 18-30
Denning E 10-18 John Deere Dain AWD
International Harvester 140 Parrett H 12-25
International Harvester 140 Hart-Parr Oil King 23-35
International Harvester 140 Parrett E 10-20
Choose another tractor
Useful links and guides ....
- International Harvester provided us with the latest version of its 140 service repair manual
- Find All mechanical and electrical parts and accessories of International Harvester 140 farm-tractor here
- Get your Denning E 10-18 manual book version
- Cabine, electrical And mechanical parts for Denning E 10-18 farm-tractor here
