John Deere 4010 Wheel Technical specs


Make John Deere
Model 4010 Wheel
Company country United states
Production years From 1960  Until 1963
Tractor type Industrial tractor
Fuel gasoline
Price -
Total build 282 (total)
Service repair manual John Deere 4010 Wheel Manual
Industrial front tires 9.00-16
Industrial rear tires 18x26
Weight 8378 lbs or 3800 kg
Length 149.5 inches [379 cm]
Width 94 inches [238 cm]
Height 88.625 inches [225 cm]
Wheelbase 96.325 inches [244 cm]
Ground clearance -
Rear tread size 70 inches
Front tread size 64 inches
Engine size 380 ci or 6.2 L
Number of cylinders 6 cylinders
Horsepower 94.10 hp or 70.2 kW
Power RPM 2200 (rpm)
Engine torque 254 lb-ft or 344.4 Nm
Engine torque RPM 1400 (rpm)
Fuel type gasoline
Fuel tank capacity 34 gal or 128.7 L
Compression ratio 16.4:1
Bore stroke 4.125x4.75 inches or (105 x 121 mm)
Oil tank capacity 8 qts or 7.6 L
Coolant tank capacity 23 qts or 21.8 L
Number of batteries 2
Battery voltage 6 V
Electric ground force positive
Engine starter volts 24 V
Parts And Accessories John Deere 4010 Wheel Parts
Transmission system John Deere Syncro-Range
Transmission type partially synchronized
Transmission gears 8 forward and 3 reverse
Clutch system 304.8mm dry disc
Oil tank capacity 44 qts or 41.6 L
Wheel drive 4x2 2WD
Final drive system planetary
Steering system hydraulic power
Braking system differential hydraulic wet disc
Cabin type Open operator station
Hydraulic system closed center
Number of valves 0 to 2
Pump flow rate 18 gpm or 68.1 lpm
Hydraulic tank capacity 11 gal or 41.6 L
Hydraulic pressure 2000 psi or 137.9 bar
PTO claimed power -
PTO clutch system -
Rear PTO system independent
Rear PTO RPM 540 (rpm)
Front PTO system independent
Front PTO RPM 1000 (rpm)
PTO fuel consumption -
Hitch control system -
Rear hitch II
Rear hitch lift -



Detailed review of John Deere 4010 Wheel

John Deere produced its 4010 Wheel industrial tractor model From 1960  Until 1963 in United states with a Open operator station cabin and more than 282 (total) units were build.
Talking dimensions and weight, this model weighs 8378 lbs or 3800 kg has 94 inches [238 cm] of width, 149.5 inches [379 cm] of length and 88.625 inches [225 cm] of height while maintaining a wheelbase of 96.325 inches [244 cm] the front tread is about 64 inches while the rear tread is 70 inches .
This tractor can fit industrial tires of 9.00-16 front and 18x26 back .
This John Deere 4010 Wheel is powerd by a gasoline engine it has 380 ci or 6.2 L 6 cylinders ,it can produce 94.10 hp or 70.2 kW at 2200 (rpm), and has a torque of 254 lb-ft or 344.4 Nm at 1400 (rpm) the fuel tank capacity is 34 gal or 128.7 L.
This machine has 4x2 2WD wheel drive system,8 forward and 3 reverse John Deere Syncro-Range transmission system.

- John Deere provided us with the latest version of its 4010 Wheel service repair manual
- Find All mechanical and electrical parts and accessories of John Deere 4010 Wheel industrial-tractor here