J.I. Case 680 Construction King Technical specs


Make J.I. Case
Model 680 Construction King
Company country Unites states
Production years From 1966  Until 1968
Tractor type Industrial tractor
Fuel diesel
Price -
Total build -
Service repair manual J.I. Case 680 Construction King Manual
Industrial front tires 11Lx16
Industrial rear tires 16.9x24
Weight 12375 lbs or 5613 kg
Length 194.5 inches [494 cm]
Width -
Height -
Wheelbase 80.5 inches [204 cm]
Ground clearance -
Rear tread size 66.75 inches
Front tread size 70.75 inches
Engine size 267 ci or 4.4 L
Number of cylinders 4 cylinders
Horsepower 64 hp or 47.7 kW
Power RPM 2000 (rpm)
Engine torque 205 lb-ft or 278.0 Nm
Engine torque RPM 1300 (rpm)
Fuel type diesel
Fuel tank capacity 28 gal or 106.0 L
Compression ratio 15:1
Bore stroke 4.125x5.00 inches or (105 x 127 mm)
Number of batteries 2
Battery voltage 12 V
Electric ground force -
Electric charging system alternator
Electric charging Amps 55 amps
Starter motor electric
Engine starter volts 12 V
Parts And Accessories J.I. Case 680 Construction King Parts
Transmission type power shuttle
Transmission gears 4 forward and reverse
Wheel drive 4x2 2WD
Steering system hydrostatic power
Braking system hydraulic disc
Cabin type Open operator station
Hydraulic system open center
Pump flow rate 25 gpm or 94.6 lpm
Hydraulic tank capacity 17.5 gal or 66.2 L
Hydraulic pressure 2150 psi or 148.2 bar
Hydraulic max flow 42 gpm or 159.0 lpm
PTO claimed power -
PTO clutch system -
Rear PTO system -
Front PTO system -
PTO fuel consumption -
Hitch control system -
Rear hitch -
Rear hitch lift -



Detailed review of J.I. Case 680 Construction King

J.I. Case produced its 680 Construction King industrial tractor model From 1966  Until 1968 in Unites states with a Open operator station cabin.
Talking dimensions and weight, this model weighs 12375 lbs or 5613 kg has , 194.5 inches [494 cm] of length while maintaining a wheelbase of 80.5 inches [204 cm] the front tread is about 70.75 inches while the rear tread is 66.75 inches .
This tractor can fit industrial tires of 11Lx16 front and 16.9x24 back .
This J.I. Case 680 Construction King is powerd by a diesel engine it has 267 ci or 4.4 L 4 cylinders ,it can produce 64 hp or 47.7 kW at 2000 (rpm), and has a torque of 205 lb-ft or 278.0 Nm at 1300 (rpm) the fuel tank capacity is 28 gal or 106.0 L.
This machine has 4x2 2WD wheel drive system,4 forward and reverse transmission system.

- J.I. Case provided us with the latest version of its 680 Construction King service repair manual
- Find All mechanical and electrical parts and accessories of J.I. Case 680 Construction King industrial-tractor here