J.I. Case 480D Technical specs


Make J.I. Case
Model 480D
Company country Unites states
Production years From 1980  Until 1987
Tractor type Industrial tractor
Fuel diesel
Price -
Total build -
Service repair manual J.I. Case 480D Manual
Industrial front tires 8.00x16
Industrial rear tires 16.9x24
Weight 5,284 lbs or 2396 kg
Length 126.1 inches [320 cm] (tractor only)
Width 83.1 inches [211 cm]
Height 100.4 inches [255 cm]
Wheelbase 80 inches [203 cm]
Ground clearance 12.6 inches [32 cm]
Rear tread size 60.2 to 66.2 inches
Front tread size 59.1 to 62.2 inches
Engine size 188 ci or 3.1 L
Number of cylinders 4 cylinders
Horsepower 47 hp or 35.0 kW
Power RPM 2100 (rpm)
Engine torque 138 lb-ft or 187.1 Nm
Engine torque RPM 1400 (rpm)
Fuel type diesel
Fuel tank capacity 23.5 gal or 88.9 L
Compression ratio 17.5:1
Bore stroke 3.812x4.125 inches or (97 x 105 mm)
Oil tank capacity 7 qts or 6.6 L
Coolant tank capacity 14 qts or 13.2 L
Number of batteries -
Battery voltage 12 V
Battery cold cranking Amps 575
Electric ground force negative
Electric charging system alternator
Electric charging Amps 39 amps
Engine starter volts 12 V
Parts And Accessories J.I. Case 480D Parts
Transmission type power shuttle
Transmission gears 4 forward and reverse
Oil tank capacity 20 qts or 18.9 L
Wheel drive 4x2 2WD
Steering system hydrostatic power
Braking system hydraulic
Cabin type Four-post ROPS
Pump flow rate 23.9 gpm or 90.5 lpm
Steering flow rate 6.4 gpm or 24.2 lpm
Hydraulic tank capacity 10.8 gal or 40.9 L
PTO claimed power 19 hp or 14.2 kW
PTO clutch system -
Rear PTO system optional
Rear PTO RPM 540 (rpm)
Front PTO system -
PTO fuel consumption -
Hitch control system -
Rear hitch -
Rear hitch lift -



Detailed review of J.I. Case 480D

J.I. Case produced its 480D industrial tractor model From 1980  Until 1987 in Unites states with a Four-post ROPS cabin.
Talking dimensions and weight, this model weighs 5,284 lbs or 2396 kg has 83.1 inches [211 cm] of width, 126.1 inches [320 cm] (tractor only) of length and 100.4 inches [255 cm] of height while maintaining a wheelbase of 80 inches [203 cm] and a ground clearance of 12.6 inches [32 cm] the front tread is about 59.1 to 62.2 inches while the rear tread is 60.2 to 66.2 inches .
This tractor can fit industrial tires of 8.00x16 front and 16.9x24 back .
This J.I. Case 480D is powerd by a diesel engine it has 188 ci or 3.1 L 4 cylinders ,it can produce 47 hp or 35.0 kW at 2100 (rpm), and has a torque of 138 lb-ft or 187.1 Nm at 1400 (rpm) the fuel tank capacity is 23.5 gal or 88.9 L.
This machine has 4x2 2WD wheel drive system,4 forward and reverse transmission system.

- J.I. Case provided us with the latest version of its 480D service repair manual
- Find All mechanical and electrical parts and accessories of J.I. Case 480D industrial-tractor here