Ford 260C VS International Harvester 140 specs comparison

Ford 260C
General InfosMake | Ford |
Model | 260C |
Country | United states |
Production | From 1989 Until 1994 |
Price | - |
Tractor type | Industrial tractor |
Fuel | diesel |
Service repair manual | Ford 260C Manual |
Dimensions, sizes and tires
AG front tires | - |
AG rear tires | - |
Lawn front tires | 9.00-10 |
Lawn rear tires | 9.00-10 |
Indus front tires | - |
Indus rear tires | 16.9-24 |
Weight | 4948 lbs or 2244 kg |
Length | 132 inches [335 cm] |
Width | 82 inches [208 cm] |
Height | 92 inches [233 cm] |
Wheelbase | 81 inches [205 cm] |
Ground clearance | - |
Turning radius | - |
Rear tread size | 61 inches |
Front tread size | 58 inches |
Turning radius | - |
Horsepower and engin specs
Engine capacity | 201 ci or 3.3 L |
Cylinders | 3 cylinders |
Engine power | 63 hp or 47.0 kW |
Engine RPM | 2200 (rpm) |
Torque | 176 lb-ft or 238.7 Nm | Torque RPM | 1400 (rpm) |
Fuel type | diesel |
Fuel injection | - |
Fuel tank size | 16 gal or 60.6 L |
Oil capacity | 7 qts or 6.6 L |
Oil change | - |
Starter motor | - |
Starter volts | 12 V |
Parts And Accessories | Ford 260C Parts |
Batteries number | 1 |
Batteries voltage | 12 V |
Battries Amps | 128 amps |
Cold Amps | 750 |
Ground force | negative |
Charging system | alternator |
Charging Volts | - |
Charging Amps | 55 amps |
Trans system | - |
Trans type | torque converter |
Trans gears | 8 forward and reverse |
Clutch system | - |
Wheel drive | 4x2 2WD |
Final drive | - |
Steering | power |
Braking system | wet disc |
Cabin type | Four-post ROPS/FOPS |
Differentiel lock | mechanical rear |
System | open center |
Valves | - |
Pump flow | 21.5 gpm or 81.4 lpm |
SVC flow | - |
Steering flow | 5.9 gpm or 22.3 lpm |
Tank capacity | 11 gal or 41.6 L |
Hydraulic pressure | 2200 psi or 151.7 bar |
Max flow | - |
Drawbar type | - |
Claimed power | - |
Drawbar horsepower | - |
Fuel consumption | - |
Pulling power | - |
Claimed power | 52 hp or 38.8 kW |
Real power | - |
Engine @RPM | 540@1800 (rpm) |
PTO Clutch | - |
Rear PTO | independent |
Rear PTO RPM | 540 (rpm) |
Front PTO | - |
Front PTO RPM | - |
Mid PTO | - |
Mid PTO RPM | - |
Fuel consumption | - |
Hitch system | position and draft control |
Rear hitch | I/II |
Rear hitch lift | 3080 lbs or 1397 kg |
Front hitch | - |
Front hitch lift | - |

International Harvester 140
General InfosMake | International Harvester |
Model | 140 |
Country | United states |
Production | From 1958 Until 1979 |
Price | - |
Tractor type | Industrial tractor |
Fuel | gasoline |
Service repair manual | International Harvester 140 Manual |
Dimensions, sizes and tires
AG front tires | 5.50-16 |
AG rear tires | 10-24 |
Lawn front tires | - |
Lawn rear tires | - |
Indus front tires | - |
Indus rear tires | - |
Weight | 2,700 lbs or 1224 kg |
Length | 107 inches [271 cm] |
Width | 56 inches [142 cm] |
Height | - |
Wheelbase | 71 inches [180 cm] |
Ground clearance | 22.3 inches [56 cm] |
Turning radius | - |
Rear tread size | 40 to 68 inches |
Front tread size | 40 to 58 inches |
Turning radius | - |
Horsepower and engin specs
Engine capacity | 122.7 ci or 2.0 L |
Cylinders | 4 cylinders |
Engine power | 25 hp or 18.6 kW |
Engine RPM | 1400 (rpm) |
Torque | 106 lb-ft or 143.7 Nm | Torque RPM | 1400 (rpm) |
Fuel type | gasoline |
Fuel injection | - |
Fuel tank size | 11 gal or 41.6 L |
Oil capacity | 5 qts or 4.7 L |
Oil change | - |
Starter motor | - |
Starter volts | 12 V |
Parts And Accessories | International Harvester 140 Parts |
Batteries number | 1 |
Batteries voltage | 12 V |
Battries Amps | - |
Cold Amps | - |
Ground force | - |
Charging system | - |
Charging Volts | - |
Charging Amps | - |
Trans system | - |
Trans type | sliding gear |
Trans gears | 4 forward and 1 reverse |
Clutch system | single 9-inch dry disc |
Wheel drive | 4x2 2WD |
Final drive | - |
Steering | manual worm-and-sector |
Braking system | differential mechanical contracting band |
Cabin type | Open operator station |
Differentiel lock | - |
System | IH Touch-Control |
Valves | - |
Pump flow | - |
SVC flow | - |
Steering flow | - |
Tank capacity | 3.38 gal or 12.8 L |
Hydraulic pressure | - |
Max flow | 4.6 gpm or 17.4 lpm |
Drawbar type | - |
Claimed power | - |
Drawbar horsepower | - |
Fuel consumption | - |
Pulling power | - |
Claimed power | 21 hp or 15.7 kW |
Real power | - |
Engine @RPM | - |
PTO Clutch | - |
Rear PTO | transmission |
Rear PTO RPM | 540 (rpm) |
Front PTO | - |
Front PTO RPM | - |
Mid PTO | - |
Mid PTO RPM | - |
Fuel consumption | - |
Hitch system | - |
Rear hitch | - |
Rear hitch lift | - |
Front hitch | - |
Front hitch lift | - |
Related tractor comparison


International Harvester 140 J.I. Case Terratrac 320


Ford 260C J.I. Case 320 Wheel


International Harvester 140 Ford 20305


International Harvester 140 Ford 20304


International Harvester 140 Ford 20306


Ford 260C Ford 20303
Choose another tractor
Useful links and guides ....
- Ford provided us with the latest version of its 260C service repair manual
- Find All mechanical and electrical parts and accessories of Ford 260C industrial-tractor here
- Get your International Harvester 140 manual book version
- Cabine, electrical And mechanical parts for International Harvester 140 industrial-tractor here