Ford 2600 VS Deutz-Fahr DX 7.10 specs comparison
Ford 2600
General Infos| Make | Ford |
| Model | 2600 |
| Country | United states |
| Production | From 1975 Until 1981 |
| Price | - |
| Tractor type | Utility tractor |
| Fuel | diesel |
| Service repair manual | Ford 2600 Manual |
Dimensions, sizes and tires
| AG front tires | 5.50-16 |
| AG rear tires | 12.4-28 |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | - |
| Indus rear tires | - |
| Weight | 3617 lbs or 1640 kg |
| Length | 126.5 inches [321 cm] |
| Width | 52 inches [132 cm] |
| Height | - |
| Wheelbase | 75.8 inches [192 cm] |
| Ground clearance | - |
| Turning radius | - |
| Rear tread size | 52 to 76 inches |
| Front tread size | 52 to 80 inches |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 158 ci or 2.6 L |
| Cylinders | 3 cylinders |
| Engine power | 34.3 hp or 25.6 kW |
| Engine RPM | 2000 (rpm) |
| Torque | 100.5 lb-ft or 136.3 Nm | Torque RPM | 1350 (rpm) |
| Fuel type | diesel |
| Fuel injection | - |
| Fuel tank size | 13 gal or 49.2 L |
| Oil capacity | 7 qts or 6.6 L |
| Oil change | - |
| Starter motor | electric |
| Starter volts | 12 V |
| Parts And Accessories | Ford 2600 Parts |
| Batteries number | 1 |
| Batteries voltage | 12 V |
| Battries Amps | - |
| Cold Amps | - |
| Ground force | negative |
| Charging system | alternator |
| Charging Volts | - |
| Charging Amps | 32 amps |
| Trans system | Dual-Range |
| Trans type | gear |
| Trans gears | 6 forward and 4 reverse |
| Clutch system | dry disc |
| Wheel drive | 4x2 2WD |
| Final drive | - |
| Steering | power |
| Braking system | differential mechanical expanding shoe |
| Cabin type | Open operator station |
| Differentiel lock | mechanical rear |
| System | - |
| Valves | - |
| Pump flow | 8.5 gpm or 32.2 lpm |
| SVC flow | - |
| Steering flow | - |
| Tank capacity | 6.15 gal or 23.3 L |
| Hydraulic pressure | 2100 psi or 144.8 bar |
| Max flow | - |
| Drawbar type | - |
| Claimed power | - |
| Drawbar horsepower | 27.51 hp or 20.5 kW |
| Fuel consumption | 2.3 gal/hour or 8.7 l/hour |
| Pulling power | 4,452 lbs or 2019 kg |
| Claimed power | 30 hp or 22.4 kW |
| Real power | 30.76 hp or 22.9 kW |
| Engine @RPM | - |
| PTO Clutch | - |
| Rear PTO | transmission |
| Rear PTO RPM | 540 (rpm) |
| Front PTO | - |
| Front PTO RPM | - |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | 2.1 gal/hour or 7.9 l/hour |
| Hitch system | top-link draft sensing |
| Rear hitch | I |
| Rear hitch lift | 1975 lbs or 895 kg |
| Front hitch | - |
| Front hitch lift | - |
Deutz-Fahr DX 7.10
General Infos| Make | Deutz-Fahr |
| Model | DX 7.10 |
| Country | Germany |
| Production | From 1984 Until 1989 |
| Price | - |
| Tractor type | Row Crop tractor |
| Fuel | diesel |
| Service repair manual | Deutz-Fahr DX 7.10 Manual |
Dimensions, sizes and tires
| AG front tires | 11.00x16 |
| AG rear tires | 20.8x38 |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | - |
| Indus rear tires | - |
| Weight | 11905 lbs or 5400 kg |
| Length | 187.8 inches [477 cm] |
| Width | 93 inches [236 cm] |
| Height | 109.8 inches [278 cm] |
| Wheelbase | 111.3 inches [282 cm] |
| Ground clearance | - |
| Turning radius | - |
| Rear tread size | 64 to 88 inches |
| Front tread size | - |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 373.9 ci or 6.1 L |
| Cylinders | 6 cylinders |
| Engine power | 160 hp or 119.3 kW |
| Engine RPM | 2400 (rpm) |
| Torque | - | Torque RPM | - |
| Fuel type | diesel |
| Fuel injection | - |
| Fuel tank size | 66 gal or 249.8 L |
| Oil capacity | 17 qts or 16.1 L |
| Oil change | - |
| Starter motor | electric |
| Starter volts | 12 V |
| Parts And Accessories | Deutz-Fahr DX 7.10 Parts |
| Batteries number | - |
| Batteries voltage | 12 V |
| Battries Amps | - |
| Cold Amps | - |
| Ground force | negative |
| Charging system | alternator |
| Charging Volts | - |
| Charging Amps | - |
| Trans system | Powermatic |
| Trans type | two-speed power shift |
| Trans gears | 32 forward and 8 reverse |
| Clutch system | cerametallic disc |
| Wheel drive | 4x2 2WD |
| Final drive | - |
| Steering | power |
| Braking system | hydraulic dry disc |
| Cabin type | Mastercab standard with air-conditioning |
| Differentiel lock | mechanical rear |
| System | open center |
| Valves | 1 to 3 |
| Pump flow | 27.3 gpm or 103.3 lpm |
| SVC flow | - |
| Steering flow | - |
| Tank capacity | - |
| Hydraulic pressure | 2538 psi or 175.0 bar |
| Max flow | - |
| Drawbar type | - |
| Claimed power | - |
| Drawbar horsepower | - |
| Fuel consumption | - |
| Pulling power | - |
| Claimed power | 145 hp or 108.1 kW |
| Real power | - |
| Engine @RPM | 540@1920 (rpm) |
| PTO Clutch | - |
| Rear PTO | independent |
| Rear PTO RPM | 540 (rpm) |
| Front PTO | independent |
| Front PTO RPM | 1000 (rpm) |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | - |
| Hitch system | - |
| Rear hitch | III |
| Rear hitch lift | 18739 lbs or 8500 kg |
| Front hitch | - |
| Front hitch lift | - |
Related tractor comparison
Deutz-Fahr DX 7.10 John Deere 2555
Ford 2600 Kubota L1-265
Ford 2600 J.I. Case 1594
Ford 2600 Kubota L3350
Deutz-Fahr DX 7.10 Deutz-Allis 7120
Ford 2600 Allis Chalmers 6070
Choose another tractor
Useful links and guides ....
- Ford provided us with the latest version of its 2600 service repair manual
- Find All mechanical and electrical parts and accessories of Ford 2600 farm-tractor here
- Get your Deutz-Fahr DX 7.10 manual book version
- Cabine, electrical And mechanical parts for Deutz-Fahr DX 7.10 farm-tractor here
