Ford 2110 VS Marshall 802 specs comparison

Ford 2110
General InfosMake | Ford |
Model | 2110 |
Country | United states |
Production | From 1983 Until 1987 |
Price | - |
Tractor type | Compact Utility tractor |
Fuel | diesel |
Service repair manual | Ford 2110 Manual |
Dimensions, sizes and tires
AG front tires | 6.00-16 |
AG rear tires | 13.6-28 |
Lawn front tires | 25x8.50-14 (2WD) |
Lawn rear tires | 25x8.50-14 (2WD) |
Indus front tires | - |
Indus rear tires | - |
Weight | 3635 lbs or 1648 kg |
Length | 131.1 inches [332 cm] |
Width | 61.7 inches [156 cm] |
Height | - |
Wheelbase | 75.6 inches [192 cm] |
Ground clearance | 15.6 inches [39 cm] |
Turning radius | - |
Rear tread size | 48 to 72 inches |
Front tread size | 48 to 72 inches |
Turning radius | - |
Horsepower and engin specs
Engine capacity | 138.5 ci or 2.3 L |
Cylinders | 4 cylinders |
Engine power | 38 hp or 28.3 kW |
Engine RPM | 2500 (rpm) |
Torque | 89.5 lb-ft or 121.4 Nm | Torque RPM | 2000 (rpm) |
Fuel type | diesel |
Fuel injection | - |
Fuel tank size | 10.6 gal or 40.1 L |
Oil capacity | 8 qts or 7.6 L |
Oil change | - |
Starter motor | - |
Starter volts | 12 V |
Parts And Accessories | Ford 2110 Parts |
Batteries number | 1 |
Batteries voltage | 12 V |
Battries Amps | 100 amps |
Cold Amps | - |
Ground force | negative |
Charging system | alternator |
Charging Volts | 12 V |
Charging Amps | 35 amps |
Trans system | - |
Trans type | partially synchronized |
Trans gears | 12 forward and 4 reverse |
Clutch system | 240mm dry disc |
Wheel drive | 4x2 2WD |
Final drive | spur gear |
Steering | power |
Braking system | differential mechanical drum |
Cabin type | Two-post fixed ROPS |
Differentiel lock | mechanical rear |
System | open center |
Valves | - |
Pump flow | 8.6 gpm or 32.6 lpm |
SVC flow | - |
Steering flow | 3.5 gpm or 13.2 lpm |
Tank capacity | - |
Hydraulic pressure | 2133 psi or 147.1 bar |
Max flow | 12.1 gpm or 45.8 lpm |
Drawbar type | - |
Claimed power | - |
Drawbar horsepower | 30.10 hp or 22.4 kW |
Fuel consumption | 2.6 gal/hour or 9.8 l/hour |
Pulling power | 3,728 lbs or 1691 kg |
Claimed power | 34.5 hp or 25.7 kW |
Real power | 35.56 hp or 26.5 kW |
Engine @RPM | 540@2392 (rpm) |
PTO Clutch | - |
Rear PTO | live |
Rear PTO RPM | 540 (rpm) |
Front PTO | - |
Front PTO RPM | - |
Mid PTO | - |
Mid PTO RPM | - |
Fuel consumption | 2.5 gal/hour or 9.5 l/hour |
Hitch system | position and draft control |
Rear hitch | I |
Rear hitch lift | 2013 lbs or 913 kg |
Front hitch | - |
Front hitch lift | - |

Marshall 802
General InfosMake | Marshall |
Model | 802 |
Country | United states |
Production | From 1982 Until 1984 |
Price | 20,500 USD |
Tractor type | Utility tractor |
Fuel | diesel |
Service repair manual | Marshall 802 Manual |
Dimensions, sizes and tires
AG front tires | 7.50x16 |
AG rear tires | 14.00x34 |
Lawn front tires | - |
Lawn rear tires | - |
Indus front tires | - |
Indus rear tires | - |
Weight | 6550 lbs or 2971 kg |
Length | - |
Width | - |
Height | - |
Wheelbase | - |
Ground clearance | - |
Turning radius | - |
Rear tread size | - |
Front tread size | - |
Turning radius | - |
Horsepower and engin specs
Engine capacity | 230 ci or 3.8 L |
Cylinders | 4 cylinders |
Engine power | 82 hp or 61.1 kW |
Engine RPM | 2200 (rpm) |
Torque | - | Torque RPM | - |
Fuel type | diesel |
Fuel injection | - |
Fuel tank size | - |
Oil capacity | - |
Oil change | - |
Starter motor | - |
Starter volts | 12 V |
Parts And Accessories | Marshall 802 Parts |
Batteries number | - |
Batteries voltage | 12 V |
Battries Amps | - |
Cold Amps | - |
Ground force | - |
Charging system | alternator |
Charging Volts | - |
Charging Amps | 36 amps |
Trans system | - |
Trans type | synchromesh |
Trans gears | 9 forward and 3 reverse |
Clutch system | 305mm hydraulic dry disc |
Wheel drive | 4x2 2WD |
Final drive | spur gear |
Steering | power |
Braking system | hydraulic wet disc |
Cabin type | Cab standard with heat |
Differentiel lock | mechanical rear |
System | - |
Valves | - |
Pump flow | 14.5 gpm or 54.9 lpm |
SVC flow | - |
Steering flow | - |
Tank capacity | - |
Hydraulic pressure | 2600 psi or 179.3 bar |
Max flow | - |
Drawbar type | - |
Claimed power | - |
Drawbar horsepower | - |
Fuel consumption | - |
Pulling power | - |
Claimed power | 74 hp or 55.2 kW |
Real power | - |
Engine @RPM | - |
PTO Clutch | - |
Rear PTO | independent |
Rear PTO RPM | 540 (rpm) |
Front PTO | - |
Front PTO RPM | - |
Mid PTO | - |
Mid PTO RPM | - |
Fuel consumption | - |
Hitch system | position and draft control |
Rear hitch | II |
Rear hitch lift | 5200 lbs or 2358 kg |
Front hitch | - |
Front hitch lift | - |
Related tractor comparison


Marshall 802 Steiger Bearcat III ST-225


Marshall 802 International Harvester 685


Ford 2110 Ford 2310


Marshall 802 Hesston 1180


Ford 2110 SAME Galaxy 170


Ford 2110 John Deere 1050
Choose another tractor
Useful links and guides ....
- Ford provided us with the latest version of its 2110 service repair manual
- Find All mechanical and electrical parts and accessories of Ford 2110 farm-tractor here
- Get your Marshall 802 manual book version
- Cabine, electrical And mechanical parts for Marshall 802 farm-tractor here