Farmall 826 VS Ford 4110 specs comparison
Farmall 826
General Infos| Make | Farmall |
| Model | 826 |
| Country | United states |
| Production | From 1969 Until 1971 |
| Price | - |
| Tractor type | - |
| Fuel | diesel |
| Service repair manual | Farmall 826 Manual |
Dimensions, sizes and tires
| AG front tires | 9.5L-15 |
| AG rear tires | 18.4-34 |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | - |
| Indus rear tires | - |
| Weight | 9860 lbs or 4472 kg |
| Length | - |
| Width | - |
| Height | - |
| Wheelbase | 105 inches [266 cm] |
| Ground clearance | - |
| Turning radius | - |
| Rear tread size | - |
| Front tread size | - |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 301 ci or 4.9 L |
| Cylinders | 6 cylinders |
| Engine power | - |
| Engine RPM | 2400 (rpm) |
| Torque | - | Torque RPM | - |
| Fuel type | diesel |
| Fuel injection | - |
| Fuel tank size | 37 gal or 140.0 L |
| Oil capacity | - |
| Oil change | - |
| Starter motor | - |
| Starter volts | 12 V |
| Parts And Accessories | Farmall 826 Parts |
| Batteries number | - |
| Batteries voltage | 12 V |
| Battries Amps | - |
| Cold Amps | - |
| Ground force | - |
| Charging system | - |
| Charging Volts | - |
| Charging Amps | - |
| Trans system | International Harvester Torque Amplifier |
| Trans type | hydrostatic |
| Trans gears | infinite forward and reverse |
| Clutch system | - |
| Wheel drive | 4x2 2WD |
| Final drive | - |
| Steering | power |
| Braking system | hydraulic dry disc |
| Cabin type | Open operator station |
| Differentiel lock | - |
| System | open center |
| Valves | - |
| Pump flow | - |
| SVC flow | - |
| Steering flow | - |
| Tank capacity | - |
| Hydraulic pressure | - |
| Max flow | - |
| Drawbar type | - |
| Claimed power | 61 hp or 45.5 kW |
| Drawbar horsepower | 61.39 hp or 45.8 kW |
| Fuel consumption | 6.1 gal/hour or 23.1 l/hour |
| Pulling power | 8,780 lbs or 3982 kg |
| Claimed power | 84 hp or 62.6 kW |
| Real power | 79.00 hp or 58.9 kW |
| Engine @RPM | - |
| PTO Clutch | - |
| Rear PTO | independent |
| Rear PTO RPM | 540 (rpm) |
| Front PTO | - |
| Front PTO RPM | - |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | 5.6 gal/hour or 21.2 l/hour |
| Hitch system | - |
| Rear hitch | II |
| Rear hitch lift | - |
| Front hitch | - |
| Front hitch lift | - |
Ford 4110
General Infos| Make | Ford |
| Model | 4110 |
| Country | United states |
| Production | From 1982 Until 1983 |
| Price | - |
| Tractor type | Utility tractor |
| Fuel | diesel |
| Service repair manual | Ford 4110 Manual |
Dimensions, sizes and tires
| AG front tires | 7.50-16 |
| AG rear tires | 13.6-28 |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | - |
| Indus rear tires | - |
| Weight | 4,340 lbs or 1968 kg |
| Length | 136.3 inches [346 cm] |
| Width | 70.8 inches [179 cm] |
| Height | - |
| Wheelbase | 77.3 inches [196 cm] |
| Ground clearance | - |
| Turning radius | 11.3 feet [3.4 m] |
| Rear tread size | 52 to 80 inches |
| Front tread size | 56 to 80 inches |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 201 ci or 3.3 L |
| Cylinders | 3 cylinders |
| Engine power | 54 hp or 40.3 kW |
| Engine RPM | 2200 (rpm) |
| Torque | 135.6 lb-ft or 183.9 Nm | Torque RPM | 1400 (rpm) |
| Fuel type | diesel |
| Fuel injection | - |
| Fuel tank size | 13 gal or 49.2 L |
| Oil capacity | 7 qts or 6.6 L |
| Oil change | - |
| Starter motor | - |
| Starter volts | 12 V |
| Parts And Accessories | Ford 4110 Parts |
| Batteries number | 1 |
| Batteries voltage | 12 V |
| Battries Amps | 128 amps |
| Cold Amps | - |
| Ground force | negative |
| Charging system | alternator |
| Charging Volts | - |
| Charging Amps | 32 amps |
| Trans system | Dual-range |
| Trans type | synchromesh |
| Trans gears | 8 forward and 4 reverse |
| Clutch system | - |
| Wheel drive | 4x2 2WD |
| Final drive | - |
| Steering | power assist |
| Braking system | wet disc |
| Cabin type | Two-post ROPS |
| Differentiel lock | - |
| System | live |
| Valves | - |
| Pump flow | 8.5 gpm or 32.2 lpm |
| SVC flow | - |
| Steering flow | 3.6 gpm or 13.6 lpm |
| Tank capacity | - |
| Hydraulic pressure | 2500 psi or 172.4 bar |
| Max flow | - |
| Drawbar type | - |
| Claimed power | - |
| Drawbar horsepower | 39.80 hp or 29.7 kW |
| Fuel consumption | 3.1 gal/hour or 11.7 l/hour |
| Pulling power | 5,691 lbs or 2581 kg |
| Claimed power | 48 hp or 35.8 kW |
| Real power | 44.06 hp or 32.9 kW |
| Engine @RPM | - |
| PTO Clutch | - |
| Rear PTO | independent |
| Rear PTO RPM | 540 (rpm) |
| Front PTO | - |
| Front PTO RPM | - |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | 2.7 gal/hour or 10.2 l/hour |
| Hitch system | - |
| Rear hitch | I |
| Rear hitch lift | 3,080 lbs or 1397 kg |
| Front hitch | - |
| Front hitch lift | - |
Related tractor comparison
Farmall 826 Versatile 945
Ford 4110 John Deere 1040
Farmall 826 Steiger Panther CP-1360
Farmall 826 Ford 3910
Ford 4110 Ford 1510
Farmall 826 Allis Chalmers 6140
Choose another tractor
Useful links and guides ....
- Farmall provided us with the latest version of its 826 service repair manual
- Find All mechanical and electrical parts and accessories of Farmall 826 farm-tractor here
- Get your Ford 4110 manual book version
- Cabine, electrical And mechanical parts for Ford 4110 farm-tractor here