Deutz-Fahr M640 VS Ferguson Pony specs comparison
Deutz-Fahr M640
General Infos| Make | Deutz-Fahr |
| Model | M640 |
| Country | Germany |
| Production | From 2007 Until 2009 |
| Price | - |
| Tractor type | - |
| Fuel | diesel |
| Service repair manual | Deutz-Fahr M640 Manual |
Dimensions, sizes and tires
| AG front tires | 540/65R28 |
| AG rear tires | 650/65R38 |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | - |
| Indus rear tires | - |
| Weight | 13160 lbs or 5969 kg |
| Length | 187.4 inches [475 cm] |
| Width | - |
| Height | 118.1 inches [299 cm] |
| Wheelbase | 109.1 inches [277 cm] |
| Ground clearance | - |
| Turning radius | - |
| Rear tread size | - |
| Front tread size | - |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 369.6 ci or 6.1 L |
| Cylinders | 6 cylinders 24 valves |
| Engine power | 171 hp or 127.5 kW |
| Engine RPM | 2100 (rpm) |
| Torque | 528.8 lb-ft or 717.1 Nm | Torque RPM | 1000 (rpm) |
| Fuel type | diesel |
| Fuel injection | - |
| Fuel tank size | 80.6 gal or 305.1 L |
| Oil capacity | - |
| Oil change | - |
| Starter motor | electric |
| Starter volts | 12 V |
| Parts And Accessories | Deutz-Fahr M640 Parts |
| Batteries number | - |
| Batteries voltage | 12 V |
| Battries Amps | 143 amps |
| Cold Amps | - |
| Ground force | - |
| Charging system | alternator |
| Charging Volts | - |
| Charging Amps | 150 amps |
| Trans system | ZF 7200 |
| Trans type | creeper |
| Trans gears | 40 forward and reverse |
| Clutch system | wet disc |
| Wheel drive | 4x4 MFWD 4WD |
| Final drive | - |
| Steering | power |
| Braking system | wet disc |
| Cabin type | Cab standard with air-conditioning |
| Differentiel lock | - |
| System | open center |
| Valves | 4 |
| Pump flow | 21.9 gpm or 82.9 lpm |
| SVC flow | - |
| Steering flow | 11 gpm or 41.6 lpm |
| Tank capacity | 10.6 gal or 40.1 L |
| Hydraulic pressure | 2900 psi or 200.0 bar |
| Max flow | - |
| Drawbar type | - |
| Claimed power | - |
| Drawbar horsepower | - |
| Fuel consumption | - |
| Pulling power | - |
| Claimed power | - |
| Real power | - |
| Engine @RPM | 1000@1960 (rpm) |
| PTO Clutch | - |
| Rear PTO | independent |
| Rear PTO RPM | 540 (rpm) |
| Front PTO | independent |
| Front PTO RPM | 1000 (rpm) |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | - |
| Hitch system | position and draft control |
| Rear hitch | III/II |
| Rear hitch lift | 13640 lbs or 6187 kg |
| Front hitch | II |
| Front hitch lift | 8800 lbs or 3991 kg |
Ferguson Pony
General Infos| Make | Ferguson |
| Model | Pony |
| Country | England |
| Production | From 1952 Until 1954 |
| Price | - |
| Tractor type | Utility tractor |
| Fuel | gasoline |
| Service repair manual | Ferguson Pony Manual |
Dimensions, sizes and tires
| AG front tires | 4.00x-15 |
| AG rear tires | 8-24 |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | - |
| Indus rear tires | - |
| Weight | 1,450 lbs or 657 kg |
| Length | - |
| Width | - |
| Height | 60 inches [152 cm] |
| Wheelbase | 66 inches [167 cm] |
| Ground clearance | - |
| Turning radius | - |
| Rear tread size | 41 to 72 inches |
| Front tread size | 45 inches |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 62 ci or 1.0 L |
| Cylinders | 4 cylinders |
| Engine power | - |
| Engine RPM | 1800 (rpm) |
| Torque | - | Torque RPM | - |
| Fuel type | gasoline |
| Fuel injection | - |
| Fuel tank size | 6.8 gal or 25.7 L |
| Oil capacity | 4 qts or 3.8 L |
| Oil change | - |
| Starter motor | - |
| Starter volts | - |
| Parts And Accessories | Ferguson Pony Parts |
| Batteries number | - |
| Batteries voltage | - |
| Battries Amps | - |
| Cold Amps | - |
| Ground force | - |
| Charging system | - |
| Charging Volts | - |
| Charging Amps | - |
| Trans system | - |
| Trans type | unsynchronized gear |
| Trans gears | 3 forward and 1 reverse |
| Clutch system | - |
| Wheel drive | 4x2 2WD |
| Final drive | - |
| Steering | manual |
| Braking system | differential mechanical contracting band |
| Cabin type | Open operator station |
| Differentiel lock | - |
| System | optional |
| Valves | - |
| Pump flow | 2.5 gpm or 9.5 lpm |
| SVC flow | - |
| Steering flow | - |
| Tank capacity | 0.4 gal or 1.5 L |
| Hydraulic pressure | - |
| Max flow | - |
| Drawbar type | - |
| Claimed power | 10 hp or 7.5 kW |
| Drawbar horsepower | 10.43 hp or 7.8 kW |
| Fuel consumption | - |
| Pulling power | 1432 lbs or 649 kg |
| Claimed power | - |
| Real power | - |
| Engine @RPM | - |
| PTO Clutch | - |
| Rear PTO | optional |
| Rear PTO RPM | 540 (rpm) |
| Front PTO | - |
| Front PTO RPM | - |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | - |
| Hitch system | - |
| Rear hitch | - |
| Rear hitch lift | - |
| Front hitch | - |
| Front hitch lift | - |
Related tractor comparison
Deutz-Fahr M640 McCormick-Deering Super W-6
Ferguson Pony Bolinder-Munktell BM-21
Deutz-Fahr M640 Bolinder-Munktell 36
Ferguson Pony Oliver OC-6
Ferguson Pony CO-OP E2
Ferguson Pony Allis Chalmers CA
Choose another tractor
Useful links and guides ....
- Deutz-Fahr provided us with the latest version of its M640 service repair manual
- Find All mechanical and electrical parts and accessories of Deutz-Fahr M640 farm-tractor here
- Get your Ferguson Pony manual book version
- Cabine, electrical And mechanical parts for Ferguson Pony farm-tractor here
