Deutz-Fahr DX 7.10 VS John Deere 5095M specs comparison
Deutz-Fahr DX 7.10
General Infos| Make | Deutz-Fahr |
| Model | DX 7.10 |
| Country | Germany |
| Production | From 1984 Until 1989 |
| Price | - |
| Tractor type | Row Crop tractor |
| Fuel | diesel |
| Service repair manual | Deutz-Fahr DX 7.10 Manual |
Dimensions, sizes and tires
| AG front tires | 11.00x16 |
| AG rear tires | 20.8x38 |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | - |
| Indus rear tires | - |
| Weight | 11905 lbs or 5400 kg |
| Length | 187.8 inches [477 cm] |
| Width | 93 inches [236 cm] |
| Height | 109.8 inches [278 cm] |
| Wheelbase | 111.3 inches [282 cm] |
| Ground clearance | - |
| Turning radius | - |
| Rear tread size | 64 to 88 inches |
| Front tread size | - |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 373.9 ci or 6.1 L |
| Cylinders | 6 cylinders |
| Engine power | 160 hp or 119.3 kW |
| Engine RPM | 2400 (rpm) |
| Torque | - | Torque RPM | - |
| Fuel type | diesel |
| Fuel injection | - |
| Fuel tank size | 66 gal or 249.8 L |
| Oil capacity | 17 qts or 16.1 L |
| Oil change | - |
| Starter motor | electric |
| Starter volts | 12 V |
| Parts And Accessories | Deutz-Fahr DX 7.10 Parts |
| Batteries number | - |
| Batteries voltage | 12 V |
| Battries Amps | - |
| Cold Amps | - |
| Ground force | negative |
| Charging system | alternator |
| Charging Volts | - |
| Charging Amps | - |
| Trans system | Powermatic |
| Trans type | two-speed power shift |
| Trans gears | 32 forward and 8 reverse |
| Clutch system | cerametallic disc |
| Wheel drive | 4x2 2WD |
| Final drive | - |
| Steering | power |
| Braking system | hydraulic dry disc |
| Cabin type | Mastercab standard with air-conditioning |
| Differentiel lock | mechanical rear |
| System | open center |
| Valves | 1 to 3 |
| Pump flow | 27.3 gpm or 103.3 lpm |
| SVC flow | - |
| Steering flow | - |
| Tank capacity | - |
| Hydraulic pressure | 2538 psi or 175.0 bar |
| Max flow | - |
| Drawbar type | - |
| Claimed power | - |
| Drawbar horsepower | - |
| Fuel consumption | - |
| Pulling power | - |
| Claimed power | 145 hp or 108.1 kW |
| Real power | - |
| Engine @RPM | 540@1920 (rpm) |
| PTO Clutch | - |
| Rear PTO | independent |
| Rear PTO RPM | 540 (rpm) |
| Front PTO | independent |
| Front PTO RPM | 1000 (rpm) |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | - |
| Hitch system | - |
| Rear hitch | III |
| Rear hitch lift | 18739 lbs or 8500 kg |
| Front hitch | - |
| Front hitch lift | - |
John Deere 5095M
General Infos| Make | John Deere |
| Model | 5095M |
| Country | United states |
| Production | From 2008 Until 2011 |
| Price | 57,669 USD |
| Tractor type | Utility tractor |
| Fuel | diesel |
| Service repair manual | John Deere 5095M Manual |
Dimensions, sizes and tires
| AG front tires | 7.50-16 (2WD) |
| AG rear tires | 14.9-28 |
| Lawn front tires | 27/12LL-15 (2WD) |
| Lawn rear tires | 27/12LL-15 (2WD) |
| Indus front tires | 11LL-15 (2WD) |
| Indus rear tires | 19.5-24 |
| Weight | 6,591 lbs or 2989 kg |
| Length | - |
| Width | - |
| Height | - |
| Wheelbase | 85.6 inches [217 cm] |
| Ground clearance | - |
| Turning radius | 12.7 feet [3.9 m] |
| Rear tread size | 59.6 to 71.4 inches |
| Front tread size | 58.6 to 78.3 inches |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 276 ci or 4.5 L |
| Cylinders | 4 cylinders |
| Engine power | 95 hp or 70.8 kW |
| Engine RPM | 2200 (rpm) |
| Torque | 372 lb-ft or 504.4 Nm | Torque RPM | 1600 (rpm) |
| Fuel type | diesel |
| Fuel injection | - |
| Fuel tank size | 30.3 gal or 114.7 L |
| Oil capacity | 8.8 qts or 8.3 L |
| Oil change | - |
| Starter motor | - |
| Starter volts | 12 V |
| Parts And Accessories | John Deere 5095M Parts |
| Batteries number | 1 |
| Batteries voltage | 12 V |
| Battries Amps | - |
| Cold Amps | 925 |
| Ground force | negative |
| Charging system | alternator |
| Charging Volts | - |
| Charging Amps | 70 amps |
| Trans system | PowrReverser Plus |
| Trans type | partially synchronized with power shuttle |
| Trans gears | 32 forward and 16 reverse |
| Clutch system | - |
| Wheel drive | 4x2 2WD |
| Final drive | inboard planetary |
| Steering | hydrostatic power |
| Braking system | hydraulic wet disc |
| Cabin type | Foldable ROPS |
| Differentiel lock | shift-on-the-move electro-hydraulic rear differential lock |
| System | - |
| Valves | 0, 2 or 3 |
| Pump flow | 18.4 gpm or 69.6 lpm |
| SVC flow | - |
| Steering flow | 6.3 gpm or 23.8 lpm |
| Tank capacity | 11.9 gal or 45.0 L |
| Hydraulic pressure | 2828 psi or 195.0 bar |
| Max flow | 24.7 gpm or 93.5 lpm |
| Drawbar type | - |
| Claimed power | - |
| Drawbar horsepower | - |
| Fuel consumption | - |
| Pulling power | - |
| Claimed power | 80 hp or 59.7 kW |
| Real power | 83.03 hp or 61.9 kW |
| Engine @RPM | - |
| PTO Clutch | - |
| Rear PTO | independent electrochydraulic |
| Rear PTO RPM | 540 (rpm) |
| Front PTO | - |
| Front PTO RPM | - |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | 5.1 gal/hour or 19.3 l/hour |
| Hitch system | - |
| Rear hitch | independent electrohyraulic |
| Rear hitch lift | 3,595 lbs or 1630 kg |
| Front hitch | - |
| Front hitch lift | - |
Related tractor comparison
John Deere 5095M New Holland T6050 Elite
Deutz-Fahr DX 7.10 McCormick Intl T110 Max
John Deere 5095M Kioti DK901
Deutz-Fahr DX 7.10 TYM T553
John Deere 5095M Terrion ATM 3180
Deutz-Fahr DX 7.10 Kirovets K-9360
Choose another tractor
Useful links and guides ....
- Deutz-Fahr provided us with the latest version of its DX 7.10 service repair manual
- Find All mechanical and electrical parts and accessories of Deutz-Fahr DX 7.10 farm-tractor here
- Get your John Deere 5095M manual book version
- Cabine, electrical And mechanical parts for John Deere 5095M farm-tractor here
