Deutz-Fahr DX 4.70 VS New Holland Workmaster 75 specs comparison
Deutz-Fahr DX 4.70
General Infos| Make | Deutz-Fahr |
| Model | DX 4.70 |
| Country | Germany |
| Production | From 1983 Until 1989 |
| Price | - |
| Tractor type | Row Crop tractor |
| Fuel | diesel |
| Service repair manual | Deutz-Fahr DX 4.70 Manual |
Dimensions, sizes and tires
| AG front tires | 10.00x16 |
| AG rear tires | 18.4x34 |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | - |
| Indus rear tires | - |
| Weight | 8466 lbs or 3840 kg |
| Length | 161.02 inches [408 cm] |
| Width | - |
| Height | - |
| Wheelbase | 94.5 inches [240 cm] |
| Ground clearance | - |
| Turning radius | - |
| Rear tread size | 59 to 78.7 inches |
| Front tread size | - |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 249.3 ci or 4.1 L |
| Cylinders | 4 cylinders |
| Engine power | 90 hp or 67.1 kW |
| Engine RPM | 2300 (rpm) |
| Torque | - | Torque RPM | - |
| Fuel type | diesel |
| Fuel injection | - |
| Fuel tank size | 31.7 gal or 120.0 L |
| Oil capacity | 12 qts or 11.4 L |
| Oil change | - |
| Starter motor | electric |
| Starter volts | 12 V |
| Parts And Accessories | Deutz-Fahr DX 4.70 Parts |
| Batteries number | - |
| Batteries voltage | 12 V |
| Battries Amps | - |
| Cold Amps | - |
| Ground force | negative |
| Charging system | alternator |
| Charging Volts | - |
| Charging Amps | - |
| Trans system | - |
| Trans type | fully synchronized |
| Trans gears | 20 forward and 5 reverse |
| Clutch system | cerametallic disc |
| Wheel drive | 4x2 2WD |
| Final drive | - |
| Steering | power |
| Braking system | hydraulic dry disc |
| Cabin type | Mastercab standard with air-conditioning |
| Differentiel lock | mechanical rear |
| System | open center |
| Valves | 1 to 3 |
| Pump flow | 19.6 gpm or 74.2 lpm |
| SVC flow | - |
| Steering flow | - |
| Tank capacity | - |
| Hydraulic pressure | 2538 psi or 175.0 bar |
| Max flow | - |
| Drawbar type | - |
| Claimed power | - |
| Drawbar horsepower | 73.23 hp or 54.6 kW |
| Fuel consumption | 5.1 gal/hour or 19.3 l/hour |
| Pulling power | 10,502 lbs or 4763 kg |
| Claimed power | 84 hp or 62.6 kW |
| Real power | 84.35 hp or 62.9 kW |
| Engine @RPM | 540@2025 (rpm) |
| PTO Clutch | - |
| Rear PTO | independent |
| Rear PTO RPM | 540 (rpm) |
| Front PTO | independent |
| Front PTO RPM | 1000 (rpm) |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | 5.0 gal/hour or 18.9 l/hour |
| Hitch system | - |
| Rear hitch | II |
| Rear hitch lift | 8377 lbs or 3799 kg |
| Front hitch | - |
| Front hitch lift | - |
New Holland Workmaster 75
General Infos| Make | New Holland |
| Model | Workmaster 75 |
| Country | United states |
| Production | From 2010 Until 2014 |
| Price | - |
| Tractor type | Utility tractor |
| Fuel | diesel |
| Service repair manual | New Holland Workmaster 75 Manual |
Dimensions, sizes and tires
| AG front tires | 11.2x24 |
| AG rear tires | 16.9x30 |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | - |
| Indus rear tires | - |
| Weight | 5,059 lbs or 2294 kg |
| Length | 137.2 inches [348 cm] |
| Width | 78.4 inches [199 cm] |
| Height | 95.3 inches [242 cm] |
| Wheelbase | - |
| Ground clearance | - |
| Turning radius | - |
| Rear tread size | 59.7 to 80.2 inches |
| Front tread size | 59.6 to 79.6 inches |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 195 ci or 3.2 L |
| Cylinders | 4 cylinders |
| Engine power | 75 hp or 55.9 kW |
| Engine RPM | 2500 (rpm) |
| Torque | - | Torque RPM | - |
| Fuel type | diesel |
| Fuel injection | - |
| Fuel tank size | 16 gal or 60.6 L |
| Oil capacity | - |
| Oil change | - |
| Starter motor | electric |
| Starter volts | 12 V |
| Parts And Accessories | New Holland Workmaster 75 Parts |
| Batteries number | - |
| Batteries voltage | 12 V |
| Battries Amps | - |
| Cold Amps | 800 |
| Ground force | negative |
| Charging system | alternator |
| Charging Volts | 12 V |
| Charging Amps | 65 amps |
| Trans system | - |
| Trans type | partially synchronized |
| Trans gears | 8 forward and 2 reverse |
| Clutch system | 11-inch dry organic plate |
| Wheel drive | 4x4 MFWD 4WD |
| Final drive | - |
| Steering | hydrostatic power |
| Braking system | differential mechanical wet disc |
| Cabin type | Two-post foldable ROPS |
| Differentiel lock | mechanical rear lock engaged by foot pedal |
| System | open center fixed displacement |
| Valves | 1 or 2 |
| Pump flow | 10.4 gpm or 39.4 lpm |
| SVC flow | - |
| Steering flow | 8.3 gpm or 31.4 lpm |
| Tank capacity | - |
| Hydraulic pressure | - |
| Max flow | 18.7 gpm or 70.8 lpm |
| Drawbar type | - |
| Claimed power | - |
| Drawbar horsepower | - |
| Fuel consumption | - |
| Pulling power | - |
| Claimed power | 65 hp or 48.5 kW |
| Real power | 66.69 hp or 49.7 kW |
| Engine @RPM | - |
| PTO Clutch | - |
| Rear PTO | independent |
| Rear PTO RPM | 540 (rpm) |
| Front PTO | - |
| Front PTO RPM | - |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | 4.0 gal/hour or 15.1 l/hour |
| Hitch system | position control and mechanical draft sensing |
| Rear hitch | 2/1 |
| Rear hitch lift | 3,276 lbs or 1485 kg |
| Front hitch | - |
| Front hitch lift | - |
Related tractor comparison
Deutz-Fahr DX 4.70 Chery RS1054F
New Holland Workmaster 75 Mahindra Max 25
New Holland Workmaster 75 John Deere 5070M
New Holland Workmaster 75 LS P7030
Deutz-Fahr DX 4.70 John Deere 8295R
New Holland Workmaster 75 CaseIH Farmall 80
Choose another tractor
Useful links and guides ....
- Deutz-Fahr provided us with the latest version of its DX 4.70 service repair manual
- Find All mechanical and electrical parts and accessories of Deutz-Fahr DX 4.70 farm-tractor here
- Get your New Holland Workmaster 75 manual book version
- Cabine, electrical And mechanical parts for New Holland Workmaster 75 farm-tractor here
