Deutz-Fahr DX 3.50 VS Steiger Panther III ST-325 specs comparison

Deutz-Fahr DX 3.50 1984 comparison online with competitors

Deutz-Fahr DX 3.50

General Infos
Make Deutz-Fahr
Model DX 3.50
Country Germany
Production From 1984  Until 1995
Price -
Tractor type Utility tractor
Fuel diesel
Service repair manual Deutz-Fahr DX 3.50 Manual

Dimensions, sizes and tires
AG front tires 7.50x16
AG rear tires 16.9x30
Lawn front tires -
Lawn rear tires -
Indus front tires -
Indus rear tires -
Weight 6018 lbs or 2729 kg
Length 144.5 inches [367 cm]
Width 82.3 inches [209 cm]
Height 97.5 inches [247 cm]
Wheelbase 82 inches [208 cm]
Ground clearance -
Turning radius -
Rear tread size 59 to 78.8 inches
Front tread size -
Turning radius -

Horsepower and engin specs
Engine capacity 186.72 ci or 3.1 L
Cylinders 3 cylinders
Engine power 61 hp or 45.5 kW
Engine RPM 2500 (rpm)
Torque -
Torque RPM -
Fuel type diesel
Fuel injection -
Fuel tank size 19.8 gal or 74.9 L
Oil capacity 8.5 qts or 8.0 L
Oil change -
Starter motor -
Starter volts -
Parts And Accessories Deutz-Fahr DX 3.50 Parts
Electrical and battery specs
Batteries number -
Batteries voltage -
Battries Amps -
Cold Amps -
Ground force -
Charging system -
Charging Volts -
Charging Amps -
Clutch and gearbox specs
Trans system Dual-Split
Trans type two-speed power shift
Trans gears 24 forward and 8 reverse
Clutch system dry disc
Cabine and mechanical specs
Wheel drive 4x2 2WD
Final drive -
Steering power
Braking system -
Cabin type Four-post ROPS with canopy
Differentiel lock mechanical rear
Hydraulics specifications
System open center
Valves 1 to 3
Pump flow 13.5 gpm or 51.1 lpm
SVC flow -
Steering flow -
Tank capacity 4 gal or 15.1 L
Hydraulic pressure 2538 psi or 175.0 bar
Max flow -
Drawbar specifications
Drawbar type -
Claimed power -
Drawbar horsepower -
Fuel consumption -
Pulling power -
Power take-off (PTO) specs
Claimed power -
Real power -
Engine @RPM -
PTO Clutch dry disc
Rear PTO independent
Rear PTO RPM 540 (rpm)
Front PTO independent
Front PTO RPM 1000 (rpm)
Mid PTO -
Mid PTO RPM -
Fuel consumption -
3 point hitch specifiations
Hitch system position and draft control
Rear hitch II
Rear hitch lift 5291 lbs or 2399 kg
Front hitch II
Front hitch lift -

Steiger Panther III ST-325 1976 comparison online with competitors

Steiger Panther III ST-325

General Infos
Make Steiger
Model Panther III ST-325
Country United states
Production From 1976  Until 1983
Price 103,000  USD
Tractor type Four wheel Drive (4WD) tractor
Fuel diesel
Service repair manual Steiger Panther III ST-325 Manual

Dimensions, sizes and tires
AG front tires 23.1-34
AG rear tires 23.1-34
Lawn front tires -
Lawn rear tires -
Indus front tires -
Indus rear tires -
Weight 26,900 lbs or 12201 kg
Length 252 inches [640 cm]
Width 96 inches [243 cm] (tractor body)
Height -
Wheelbase 128 inches [325 cm]
Ground clearance -
Turning radius -
Rear tread size -
Front tread size -
Turning radius -

Horsepower and engin specs
Engine capacity 893 ci or 14.6 L
Cylinders 6 cylinders
Engine power 325 hp or 242.4 kW
Engine RPM 2100 (rpm)
Torque 1015 lb-ft or 1376.3 Nm
Torque RPM 1200 (rpm)
Fuel type diesel
Fuel injection -
Fuel tank size 267 gal or 1010.6 L
Oil capacity 36 qts or 34.1 L
Oil change -
Starter motor -
Starter volts 12 V
Parts And Accessories Steiger Panther III ST-325 Parts
Electrical and battery specs
Batteries number 2
Batteries voltage 12 V
Battries Amps 208 amps
Cold Amps -
Ground force negative
Charging system alternator
Charging Volts -
Charging Amps 90 amps
Clutch and gearbox specs
Trans system Dana-Spicer 1010-3B
Trans type -
Trans gears 20 forward and 4 reverse
Clutch system 393.7mm dry disc
Cabine and mechanical specs
Wheel drive 4x4 articulated 4WD
Final drive outboard planetary
Steering hydrostatic power
Braking system hydraulic disc
Cabin type Safari Cab standard with heat and air-conditioning
Differentiel lock -
Hydraulics specifications
System open center
Valves 3 to 5
Pump flow 31.9 gpm or 120.7 lpm
SVC flow -
Steering flow -
Tank capacity -
Hydraulic pressure 2250 psi or 155.1 bar
Max flow -
Drawbar specifications
Drawbar type -
Claimed power -
Drawbar horsepower 269.86 hp or 201.2 kW
Fuel consumption 18.2 gal/hour or 68.9 l/hour
Pulling power 28,189 lbs or 12786 kg
Power take-off (PTO) specs
Claimed power -
Real power -
Engine @RPM -
PTO Clutch -
Rear PTO -
Rear PTO RPM -
Front PTO -
Front PTO RPM -
Mid PTO -
Mid PTO RPM -
Fuel consumption -
3 point hitch specifiations
Hitch system -
Rear hitch 3
Rear hitch lift -
Front hitch -
Front hitch lift -

Related tractor comparison


1984 Deutz-Fahr DX 3.50 competitors and comparison tool online specs and performance
1975 Allis Chalmers 7080 competitors and comparison tool online specs and performance

Deutz-Fahr DX 3.50 Allis Chalmers 7080

1976 Steiger Panther III ST-325 competitors and comparison tool online specs and performance
1976 Steiger Wildcat III ST-210 competitors and comparison tool online specs and performance

Steiger Panther III ST-325 Steiger Wildcat III ST-210

1984 Deutz-Fahr DX 3.50 competitors and comparison tool online specs and performance
1977 SAME Tiger 100 competitors and comparison tool online specs and performance

Deutz-Fahr DX 3.50 SAME Tiger 100

1984 Deutz-Fahr DX 3.50 competitors and comparison tool online specs and performance
1978 Deutz-Fahr DX 140 competitors and comparison tool online specs and performance

Deutz-Fahr DX 3.50 Deutz-Fahr DX 140

1984 Deutz-Fahr DX 3.50 competitors and comparison tool online specs and performance
1975 Ford 7700 competitors and comparison tool online specs and performance

Deutz-Fahr DX 3.50 Ford 7700

1984 Deutz-Fahr DX 3.50 competitors and comparison tool online specs and performance
1977 John Deere 3330 competitors and comparison tool online specs and performance

Deutz-Fahr DX 3.50 John Deere 3330


Choose another tractor









Useful links and guides ....