Deutz-Fahr DX 3.50 VS Allis Chalmers 7010 specs comparison
Deutz-Fahr DX 3.50
General Infos| Make | Deutz-Fahr |
| Model | DX 3.50 |
| Country | Germany |
| Production | From 1984 Until 1995 |
| Price | - |
| Tractor type | Utility tractor |
| Fuel | diesel |
| Service repair manual | Deutz-Fahr DX 3.50 Manual |
Dimensions, sizes and tires
| AG front tires | 7.50x16 |
| AG rear tires | 16.9x30 |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | - |
| Indus rear tires | - |
| Weight | 6018 lbs or 2729 kg |
| Length | 144.5 inches [367 cm] |
| Width | 82.3 inches [209 cm] |
| Height | 97.5 inches [247 cm] |
| Wheelbase | 82 inches [208 cm] |
| Ground clearance | - |
| Turning radius | - |
| Rear tread size | 59 to 78.8 inches |
| Front tread size | - |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 186.72 ci or 3.1 L |
| Cylinders | 3 cylinders |
| Engine power | 61 hp or 45.5 kW |
| Engine RPM | 2500 (rpm) |
| Torque | - | Torque RPM | - |
| Fuel type | diesel |
| Fuel injection | - |
| Fuel tank size | 19.8 gal or 74.9 L |
| Oil capacity | 8.5 qts or 8.0 L |
| Oil change | - |
| Starter motor | - |
| Starter volts | - |
| Parts And Accessories | Deutz-Fahr DX 3.50 Parts |
| Batteries number | - |
| Batteries voltage | - |
| Battries Amps | - |
| Cold Amps | - |
| Ground force | - |
| Charging system | - |
| Charging Volts | - |
| Charging Amps | - |
| Trans system | Dual-Split |
| Trans type | two-speed power shift |
| Trans gears | 24 forward and 8 reverse |
| Clutch system | dry disc |
| Wheel drive | 4x2 2WD |
| Final drive | - |
| Steering | power |
| Braking system | - |
| Cabin type | Four-post ROPS with canopy |
| Differentiel lock | mechanical rear |
| System | open center |
| Valves | 1 to 3 |
| Pump flow | 13.5 gpm or 51.1 lpm |
| SVC flow | - |
| Steering flow | - |
| Tank capacity | 4 gal or 15.1 L |
| Hydraulic pressure | 2538 psi or 175.0 bar |
| Max flow | - |
| Drawbar type | - |
| Claimed power | - |
| Drawbar horsepower | - |
| Fuel consumption | - |
| Pulling power | - |
| Claimed power | - |
| Real power | - |
| Engine @RPM | - |
| PTO Clutch | dry disc |
| Rear PTO | independent |
| Rear PTO RPM | 540 (rpm) |
| Front PTO | independent |
| Front PTO RPM | 1000 (rpm) |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | - |
| Hitch system | position and draft control |
| Rear hitch | II |
| Rear hitch lift | 5291 lbs or 2399 kg |
| Front hitch | II |
| Front hitch lift | - |
Allis Chalmers 7010
General Infos| Make | Allis Chalmers |
| Model | 7010 |
| Country | United states |
| Production | From 1980 Until 1981 |
| Price | 35,311 USD |
| Tractor type | Row Crop tractor |
| Fuel | diesel |
| Service repair manual | Allis Chalmers 7010 Manual |
Dimensions, sizes and tires
| AG front tires | 11.00-16 |
| AG rear tires | 24.5-32 |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | - |
| Indus rear tires | - |
| Weight | 11,260 lbs or 5107 kg |
| Length | - |
| Width | 92.6 inches [235 cm] |
| Height | - |
| Wheelbase | 106 inches [269 cm] |
| Ground clearance | - |
| Turning radius | - |
| Rear tread size | 64 to 89 inches |
| Front tread size | 60 to 88 inches |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 301 ci or 4.9 L |
| Cylinders | 6 cylinders |
| Engine power | - |
| Engine RPM | 2300 (rpm) |
| Torque | - | Torque RPM | - |
| Fuel type | diesel |
| Fuel injection | - |
| Fuel tank size | 54 gal or 204.4 L |
| Oil capacity | 20 qts or 18.9 L |
| Oil change | - |
| Starter motor | - |
| Starter volts | 12 V |
| Parts And Accessories | Allis Chalmers 7010 Parts |
| Batteries number | - |
| Batteries voltage | 12 V |
| Battries Amps | - |
| Cold Amps | - |
| Ground force | - |
| Charging system | alternator |
| Charging Volts | - |
| Charging Amps | - |
| Trans system | Allis-Chalmers Power Shift |
| Trans type | partial power shift |
| Trans gears | 12 forward and 2 reverse |
| Clutch system | - |
| Wheel drive | 4x2 2WD |
| Final drive | inboard planetary |
| Steering | hydrostatic power |
| Braking system | differential hydraulic wet disc |
| Cabin type | Accousta cab standard with heat |
| Differentiel lock | power |
| System | closed center |
| Valves | 2 |
| Pump flow | 22 gpm or 83.3 lpm |
| SVC flow | - |
| Steering flow | 9.5 gpm or 36.0 lpm |
| Tank capacity | - |
| Hydraulic pressure | - |
| Max flow | 45 gpm or 170.3 lpm |
| Drawbar type | - |
| Claimed power | - |
| Drawbar horsepower | 89.10 hp or 66.4 kW |
| Fuel consumption | 7.2 gal/hour or 27.3 l/hour |
| Pulling power | 9,516 lbs or 4316 kg |
| Claimed power | - |
| Real power | 106.33 hp or 79.3 kW |
| Engine @RPM | - |
| PTO Clutch | - |
| Rear PTO | independent |
| Rear PTO RPM | 540 1000 (rpm) |
| Front PTO | - |
| Front PTO RPM | - |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | 6.9 gal/hour or 26.1 l/hour |
| Hitch system | - |
| Rear hitch | III/II |
| Rear hitch lift | 6,680 lbs or 3030 kg |
| Front hitch | - |
| Front hitch lift | - |
Related tractor comparison
Deutz-Fahr DX 3.50 Mitsubishi MT372
Allis Chalmers 7010 Big Bud 400/30
Deutz-Fahr DX 3.50 Steiger Panther CP-1360
Allis Chalmers 7010 Mercedes-Benz Trac 1500
Deutz-Fahr DX 3.50 Zetor 4911
Allis Chalmers 7010 Fendt Favorit 610LS
Choose another tractor
Useful links and guides ....
- Deutz-Fahr provided us with the latest version of its DX 3.50 service repair manual
- Find All mechanical and electrical parts and accessories of Deutz-Fahr DX 3.50 farm-tractor here
- Get your Allis Chalmers 7010 manual book version
- Cabine, electrical And mechanical parts for Allis Chalmers 7010 farm-tractor here
