Claas 426 Celtis VS Deutz-Fahr DX 3.50 specs comparison
Claas 426 Celtis
General Infos| Make | Claas |
| Model | 426 Celtis |
| Country | Germany |
| Production | From 2003 Until 2008 |
| Price | - |
| Tractor type | Utility tractor |
| Fuel | diesel |
| Service repair manual | Claas 426 Celtis Manual |
Dimensions, sizes and tires
| AG front tires | 11.2R24 |
| AG rear tires | 16.9R30 |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | - |
| Indus rear tires | - |
| Weight | 8,225 lbs or 3730 kg |
| Length | 150.0 inches [381 cm] |
| Width | - |
| Height | - |
| Wheelbase | 98.0 inches [248 cm] |
| Ground clearance | - |
| Turning radius | 28.2 feet [8.6 m] |
| Rear tread size | - |
| Front tread size | - |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 276.4 ci or 4.5 L |
| Cylinders | 4 cylinders |
| Engine power | 75 hp or 55.9 kW |
| Engine RPM | 2000 (rpm) |
| Torque | 208.7 lb-ft or 283.0 Nm | Torque RPM | 1500 (rpm) |
| Fuel type | diesel |
| Fuel injection | - |
| Fuel tank size | 38.3 gal or 145.0 L |
| Oil capacity | - |
| Oil change | - |
| Starter motor | - |
| Starter volts | - |
| Parts And Accessories | Claas 426 Celtis Parts |
| Batteries number | - |
| Batteries voltage | - |
| Battries Amps | - |
| Cold Amps | - |
| Ground force | - |
| Charging system | - |
| Charging Volts | - |
| Charging Amps | - |
| Trans system | - |
| Trans type | - |
| Trans gears | 20 forward and reverse |
| Clutch system | - |
| Wheel drive | 4x4 MFWD 4WD |
| Final drive | - |
| Steering | hydrostatic power |
| Braking system | wet disc |
| Cabin type | standard |
| Differentiel lock | - |
| System | - |
| Valves | - |
| Pump flow | - |
| SVC flow | - |
| Steering flow | - |
| Tank capacity | - |
| Hydraulic pressure | - |
| Max flow | 18.2 gpm or 68.9 lpm |
| Drawbar type | - |
| Claimed power | - |
| Drawbar horsepower | - |
| Fuel consumption | - |
| Pulling power | - |
| Claimed power | - |
| Real power | - |
| Engine @RPM | - |
| PTO Clutch | - |
| Rear PTO | - |
| Rear PTO RPM | 540 (rpm) |
| Front PTO | - |
| Front PTO RPM | - |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | - |
| Hitch system | - |
| Rear hitch | - |
| Rear hitch lift | 9,923 lbs or 4501 kg |
| Front hitch | - |
| Front hitch lift | - |
Deutz-Fahr DX 3.50
General Infos| Make | Deutz-Fahr |
| Model | DX 3.50 |
| Country | Germany |
| Production | From 1984 Until 1995 |
| Price | - |
| Tractor type | Utility tractor |
| Fuel | diesel |
| Service repair manual | Deutz-Fahr DX 3.50 Manual |
Dimensions, sizes and tires
| AG front tires | 7.50x16 |
| AG rear tires | 16.9x30 |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | - |
| Indus rear tires | - |
| Weight | 6018 lbs or 2729 kg |
| Length | 144.5 inches [367 cm] |
| Width | 82.3 inches [209 cm] |
| Height | 97.5 inches [247 cm] |
| Wheelbase | 82 inches [208 cm] |
| Ground clearance | - |
| Turning radius | - |
| Rear tread size | 59 to 78.8 inches |
| Front tread size | - |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 186.72 ci or 3.1 L |
| Cylinders | 3 cylinders |
| Engine power | 61 hp or 45.5 kW |
| Engine RPM | 2500 (rpm) |
| Torque | - | Torque RPM | - |
| Fuel type | diesel |
| Fuel injection | - |
| Fuel tank size | 19.8 gal or 74.9 L |
| Oil capacity | 8.5 qts or 8.0 L |
| Oil change | - |
| Starter motor | - |
| Starter volts | - |
| Parts And Accessories | Deutz-Fahr DX 3.50 Parts |
| Batteries number | - |
| Batteries voltage | - |
| Battries Amps | - |
| Cold Amps | - |
| Ground force | - |
| Charging system | - |
| Charging Volts | - |
| Charging Amps | - |
| Trans system | Dual-Split |
| Trans type | two-speed power shift |
| Trans gears | 24 forward and 8 reverse |
| Clutch system | dry disc |
| Wheel drive | 4x2 2WD |
| Final drive | - |
| Steering | power |
| Braking system | - |
| Cabin type | Four-post ROPS with canopy |
| Differentiel lock | mechanical rear |
| System | open center |
| Valves | 1 to 3 |
| Pump flow | 13.5 gpm or 51.1 lpm |
| SVC flow | - |
| Steering flow | - |
| Tank capacity | 4 gal or 15.1 L |
| Hydraulic pressure | 2538 psi or 175.0 bar |
| Max flow | - |
| Drawbar type | - |
| Claimed power | - |
| Drawbar horsepower | - |
| Fuel consumption | - |
| Pulling power | - |
| Claimed power | - |
| Real power | - |
| Engine @RPM | - |
| PTO Clutch | dry disc |
| Rear PTO | independent |
| Rear PTO RPM | 540 (rpm) |
| Front PTO | independent |
| Front PTO RPM | 1000 (rpm) |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | - |
| Hitch system | position and draft control |
| Rear hitch | II |
| Rear hitch lift | 5291 lbs or 2399 kg |
| Front hitch | II |
| Front hitch lift | - |
Related tractor comparison
Claas 426 Celtis Iseki TU2100
Deutz-Fahr DX 3.50 Zetor 12145
Claas 426 Celtis J.I. Case 2294
Deutz-Fahr DX 3.50 CaseIH 4694
Deutz-Fahr DX 3.50 Deutz-Allis 6070
Deutz-Fahr DX 3.50 Valmet 405
Choose another tractor
Useful links and guides ....
- Claas provided us with the latest version of its 426 Celtis service repair manual
- Find All mechanical and electrical parts and accessories of Claas 426 Celtis farm-tractor here
- Get your Deutz-Fahr DX 3.50 manual book version
- Cabine, electrical And mechanical parts for Deutz-Fahr DX 3.50 farm-tractor here
