Challenger MT485D VS J.I. Case 18-32 specs comparison
Challenger MT485D
General Infos| Make | Challenger |
| Model | MT485D |
| Country | United states |
| Production | From 2014 Until 2016 |
| Price | - |
| Tractor type | Utility tractor |
| Fuel | diesel |
| Service repair manual | Challenger MT485D Manual |
Dimensions, sizes and tires
| AG front tires | - |
| AG rear tires | - |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | - |
| Indus rear tires | - |
| Weight | 12500 lbs or 5670 kg |
| Length | - |
| Width | - |
| Height | - |
| Wheelbase | 105 inches [266 cm] |
| Ground clearance | - |
| Turning radius | - |
| Rear tread size | - |
| Front tread size | - |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 299 ci or 4.9 L |
| Cylinders | 4 cylinders 16 valves |
| Engine power | 135 hp or 100.7 kW |
| Engine RPM | 2200 (rpm) |
| Torque | - | Torque RPM | - |
| Fuel type | diesel |
| Fuel injection | electronic high pressure common rail |
| Fuel tank size | 64 gal or 242.2 L |
| Oil capacity | - |
| Oil change | - |
| Starter motor | electric |
| Starter volts | 12 V |
| Parts And Accessories | Challenger MT485D Parts |
| Batteries number | 2 |
| Batteries voltage | 12 V |
| Battries Amps | - |
| Cold Amps | 600 |
| Ground force | negative |
| Charging system | alternator |
| Charging Volts | - |
| Charging Amps | 175 amps |
| Trans system | Techstar CVT |
| Trans type | continuously variable transmission (CVT) |
| Trans gears | infinite forward and reverse |
| Clutch system | wet disc |
| Wheel drive | 4x4 MFWD 4WD |
| Final drive | - |
| Steering | hydrostatic power |
| Braking system | wet disc |
| Cabin type | Cab standard with air-conditioning |
| Differentiel lock | - |
| System | closed center load sensing |
| Valves | 2 to 4 |
| Pump flow | - |
| SVC flow | 15 gpm or 56.8 lpm |
| Steering flow | - |
| Tank capacity | - |
| Hydraulic pressure | - |
| Max flow | - |
| Drawbar type | Cat |
| Claimed power | - |
| Drawbar horsepower | 99.0 hp or 73.8 kW |
| Fuel consumption | 7.2 gal/hour or 27.3 l/hour |
| Pulling power | 12350 lbs or 5601 kg |
| Claimed power | 110 hp or 82.0 kW |
| Real power | 133.8 hp or 99.8 kW |
| Engine @RPM | - |
| PTO Clutch | - |
| Rear PTO | independent |
| Rear PTO RPM | 540 (rpm) |
| Front PTO | - |
| Front PTO RPM | - |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | 7.7 gal/hour or 29.1 l/hour |
| Hitch system | electronic lower link draft sensing |
| Rear hitch | III/II |
| Rear hitch lift | 11400 lbs or 5171 kg |
| Front hitch | - |
| Front hitch lift | - |
J.I. Case 18-32
General Infos| Make | J.I. Case |
| Model | 18-32 |
| Country | Unites states |
| Production | From 1924 Until 1927 |
| Price | - |
| Tractor type | Standard tread tractor |
| Fuel | kerosene |
| Service repair manual | J.I. Case 18-32 Manual |
Dimensions, sizes and tires
| AG front tires | - |
| AG rear tires | 52x14 steel |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | - |
| Indus rear tires | - |
| Weight | 6,500 lbs or 2948 kg |
| Length | 127 inches [322 cm] |
| Width | 72 inches [182 cm] |
| Height | 68 inches [172 cm] |
| Wheelbase | - |
| Ground clearance | - |
| Turning radius | - |
| Rear tread size | - |
| Front tread size | - |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 381.7 ci or 6.3 L |
| Cylinders | 4 cylinders |
| Engine power | - |
| Engine RPM | 1000 (rpm) |
| Torque | - | Torque RPM | - |
| Fuel type | kerosene |
| Fuel injection | - |
| Fuel tank size | - |
| Oil capacity | - |
| Oil change | - |
| Starter motor | - |
| Starter volts | - |
| Parts And Accessories | J.I. Case 18-32 Parts |
| Batteries number | - |
| Batteries voltage | - |
| Battries Amps | - |
| Cold Amps | - |
| Ground force | - |
| Charging system | - |
| Charging Volts | - |
| Charging Amps | - |
| Trans system | J.I. Case |
| Trans type | gear |
| Trans gears | 2 forward and 1 reverse |
| Clutch system | - |
| Wheel drive | 4x2 2WD |
| Final drive | - |
| Steering | manual |
| Braking system | - |
| Cabin type | Open operator station |
| Differentiel lock | - |
| System | - |
| Valves | - |
| Pump flow | - |
| SVC flow | - |
| Steering flow | - |
| Tank capacity | - |
| Hydraulic pressure | - |
| Max flow | - |
| Drawbar type | - |
| Claimed power | 18 hp or 13.4 kW |
| Drawbar horsepower | 24.52 hp or 18.3 kW |
| Fuel consumption | - |
| Pulling power | 3,882 lbs or 1760 kg |
| Claimed power | - |
| Real power | - |
| Engine @RPM | - |
| PTO Clutch | - |
| Rear PTO | - |
| Rear PTO RPM | 540 (rpm) |
| Front PTO | - |
| Front PTO RPM | - |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | - |
| Hitch system | - |
| Rear hitch | - |
| Rear hitch lift | - |
| Front hitch | - |
| Front hitch lift | - |
Related tractor comparison
J.I. Case 18-32 Caterpillar 10-Ton
Challenger MT485D Hart-Parr 40
J.I. Case 18-32 Huber 18-36 Super Four
J.I. Case 18-32 Caterpillar 2-Ton
J.I. Case 18-32 Advance-Rumely OilPull L 15/25
Challenger MT485D Huber 25-50 Super Four
Choose another tractor
Useful links and guides ....
- Challenger provided us with the latest version of its MT485D service repair manual
- Find All mechanical and electrical parts and accessories of Challenger MT485D farm-tractor here
- Get your J.I. Case 18-32 manual book version
- Cabine, electrical And mechanical parts for J.I. Case 18-32 farm-tractor here
