Challenger MT225 VS Allis Chalmers H3 specs comparison
Challenger MT225
General Infos| Make | Challenger |
| Model | MT225 |
| Country | United states |
| Production | From 2003 Until 2005 |
| Price | - |
| Tractor type | Compact Utility tractor |
| Fuel | diesel |
| Service repair manual | Challenger MT225 Manual |
Dimensions, sizes and tires
| AG front tires | 5.00-12 |
| AG rear tires | 9.5-16 |
| Lawn front tires | 23x10.50-12 |
| Lawn rear tires | 23x10.50-12 |
| Indus front tires | 23x8.50-12 |
| Indus rear tires | 12-16.5 |
| Weight | 1,672 lbs or 758 kg |
| Length | 105.4 inches [267 cm] |
| Width | 41 inches [104 cm] |
| Height | 75.2 inches [191 cm] |
| Wheelbase | 59.5 inches [151 cm] |
| Ground clearance | - |
| Turning radius | - |
| Rear tread size | 35 inches |
| Front tread size | 36.5 inches |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 68.5 ci or 1.1 L |
| Cylinders | 3 cylinders |
| Engine power | 23.3 hp or 17.4 kW |
| Engine RPM | 2800 (rpm) |
| Torque | - | Torque RPM | - |
| Fuel type | diesel |
| Fuel injection | - |
| Fuel tank size | - |
| Oil capacity | - |
| Oil change | - |
| Starter motor | electric |
| Starter volts | 12 V |
| Parts And Accessories | Challenger MT225 Parts |
| Batteries number | 1 |
| Batteries voltage | 12 V |
| Battries Amps | - |
| Cold Amps | - |
| Ground force | negative |
| Charging system | alternator |
| Charging Volts | - |
| Charging Amps | - |
| Trans system | - |
| Trans type | hydrostatic |
| Trans gears | infinite (2-range) forward and reverse |
| Clutch system | - |
| Wheel drive | 4x4 MFWD 4WD |
| Final drive | - |
| Steering | power |
| Braking system | dry shoe |
| Cabin type | Two-post fixed ROPS |
| Differentiel lock | mechanical rear |
| System | open center |
| Valves | - |
| Pump flow | 5.4 gpm or 20.4 lpm |
| SVC flow | - |
| Steering flow | 2.5 gpm or 9.5 lpm |
| Tank capacity | - |
| Hydraulic pressure | 1930 psi or 133.1 bar |
| Max flow | 7.9 gpm or 29.9 lpm |
| Drawbar type | - |
| Claimed power | - |
| Drawbar horsepower | - |
| Fuel consumption | - |
| Pulling power | - |
| Claimed power | 19 hp or 14.2 kW |
| Real power | - |
| Engine @RPM | - |
| PTO Clutch | - |
| Rear PTO | independent |
| Rear PTO RPM | 540 (rpm) |
| Front PTO | - |
| Front PTO RPM | - |
| Mid PTO | independent |
| Mid PTO RPM | 2000 (rpm) |
| Fuel consumption | - |
| Hitch system | position control |
| Rear hitch | I |
| Rear hitch lift | 1,210 lbs or 548 kg |
| Front hitch | - |
| Front hitch lift | - |
Allis Chalmers H3
General Infos| Make | Allis Chalmers |
| Model | H3 |
| Country | United states |
| Production | From 1960 Until 1967 |
| Price | - |
| Tractor type | - |
| Fuel | gasoline |
| Service repair manual | Allis Chalmers H3 Manual |
Dimensions, sizes and tires
| AG front tires | 7-inch track |
| AG rear tires | 7-inch track |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | - |
| Indus rear tires | - |
| Weight | 7395 lbs or 3354 kg |
| Length | 108.75 inches [276 cm] |
| Width | - |
| Height | - |
| Wheelbase | 64 inches [162 cm] |
| Ground clearance | - |
| Turning radius | - |
| Rear tread size | 48 inches |
| Front tread size | 48 inches |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 149 ci or 2.4 L |
| Cylinders | 4 cylinders |
| Engine power | - |
| Engine RPM | 1650 (rpm) |
| Torque | - | Torque RPM | - |
| Fuel type | gasoline |
| Fuel injection | Marvel-Schebler carburetor |
| Fuel tank size | 14 gal or 53.0 L |
| Oil capacity | - |
| Oil change | - |
| Starter motor | electric |
| Starter volts | 12 V |
| Parts And Accessories | Allis Chalmers H3 Parts |
| Batteries number | 1 |
| Batteries voltage | 12 V |
| Battries Amps | - |
| Cold Amps | - |
| Ground force | - |
| Charging system | - |
| Charging Volts | - |
| Charging Amps | - |
| Trans system | Power Director |
| Trans type | mechanical shuttle |
| Trans gears | 4 forward and reverse |
| Clutch system | wet disc (Power Director) |
| Wheel drive | crawler |
| Final drive | - |
| Steering | mechanical clutches |
| Braking system | mechanical contracting band |
| Cabin type | Open operator station |
| Differentiel lock | - |
| System | open center |
| Valves | 1 to 3 |
| Pump flow | 15 gpm or 56.8 lpm |
| SVC flow | - |
| Steering flow | - |
| Tank capacity | 16.5 gal or 62.5 L |
| Hydraulic pressure | - |
| Max flow | - |
| Drawbar type | - |
| Claimed power | - |
| Drawbar horsepower | 25.48 hp or 19.0 kW |
| Fuel consumption | 2.9 gal/hour or 11.0 l/hour |
| Pulling power | 7893 lbs or 3580 kg |
| Claimed power | - |
| Real power | 32.11 hp or 23.9 kW |
| Engine @RPM | - |
| PTO Clutch | - |
| Rear PTO | optional |
| Rear PTO RPM | 540 (rpm) |
| Front PTO | - |
| Front PTO RPM | - |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | 2.9 gal/hour or 11.0 l/hour |
| Hitch system | - |
| Rear hitch | - |
| Rear hitch lift | - |
| Front hitch | - |
| Front hitch lift | - |
Related tractor comparison
Challenger MT225 McCormick-Deering AW-7
Allis Chalmers H3 John Deere 1010
Allis Chalmers H3 Massey Ferguson 42
Allis Chalmers H3 David Brown 40TD
Challenger MT225 Oliver 770
Challenger MT225 Massey Ferguson 35
Choose another tractor
Useful links and guides ....
- Challenger provided us with the latest version of its MT225 service repair manual
- Find All mechanical and electrical parts and accessories of Challenger MT225 farm-tractor here
- Get your Allis Chalmers H3 manual book version
- Cabine, electrical And mechanical parts for Allis Chalmers H3 farm-tractor here