Challenger 1042 VS Holder Cultitrac A12 specs comparison
Challenger 1042
General Infos| Make | Challenger |
| Model | 1042 |
| Country | United states |
| Production | From 2017 |
| Price | - |
| Tractor type | Row Crop tractor |
| Fuel | diesel |
| Service repair manual | Challenger 1042 Manual |
Dimensions, sizes and tires
| AG front tires | 420/85R38 |
| AG rear tires | 420/85R38 |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | - |
| Indus rear tires | - |
| Weight | 32734 lbs or 14848 kg |
| Length | 242 inches [614 cm] |
| Width | 118.2 inches [300 cm] |
| Height | - |
| Wheelbase | 130 inches [330 cm] |
| Ground clearance | - |
| Turning radius | - |
| Rear tread size | - |
| Front tread size | - |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 756.7 ci or 12.4 L |
| Cylinders | 6 cylinders |
| Engine power | 435 hp or 324.4 kW |
| Engine RPM | 1700 (rpm) |
| Torque | 1549 lb-ft or 2100.4 Nm | Torque RPM | 1450 (rpm) |
| Fuel type | diesel |
| Fuel injection | - |
| Fuel tank size | 211 gal or 798.6 L |
| Oil capacity | - |
| Oil change | - |
| Starter motor | electric |
| Starter volts | 24 V |
| Parts And Accessories | Challenger 1042 Parts |
| Batteries number | 2 |
| Batteries voltage | 12 V |
| Battries Amps | - |
| Cold Amps | - |
| Ground force | negative |
| Charging system | alternator |
| Charging Volts | - |
| Charging Amps | 320 amps |
| Trans system | Accu-VT |
| Trans type | continuously-variable transmission |
| Trans gears | infinite forward and reverse |
| Clutch system | - |
| Wheel drive | 4x4 MFWD 4WD |
| Final drive | - |
| Steering | power |
| Braking system | hydraulic wet disc |
| Cabin type | Cab standard with air-conditioning |
| Differentiel lock | - |
| System | load-sensing |
| Valves | up to 6 |
| Pump flow | 58 gpm or 219.5 lpm |
| SVC flow | - |
| Steering flow | - |
| Tank capacity | - |
| Hydraulic pressure | - |
| Max flow | - |
| Drawbar type | - |
| Claimed power | - |
| Drawbar horsepower | 348.5 hp or 259.9 kW |
| Fuel consumption | 20.1 gal/hour or 76.1 l/hour |
| Pulling power | 34110 lbs or 15472 kg |
| Claimed power | 386 hp or 287.8 kW |
| Real power | 408.7 hp or 304.8 kW |
| Engine @RPM | - |
| PTO Clutch | - |
| Rear PTO | independent |
| Rear PTO RPM | 1000 (rpm) |
| Front PTO | - |
| Front PTO RPM | - |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | 19.6 gal/hour or 74.2 l/hour |
| Hitch system | - |
| Rear hitch | IV/IVN |
| Rear hitch lift | 18631 lbs or 8451 kg |
| Front hitch | - |
| Front hitch lift | - |
Holder Cultitrac A12
General Infos| Make | Holder |
| Model | Cultitrac A12 |
| Country | Germany |
| Production | From 1956 |
| Price | - |
| Tractor type | - |
| Fuel | diesel |
| Service repair manual | Holder Cultitrac A12 Manual |
Dimensions, sizes and tires
| AG front tires | 5.50x16 |
| AG rear tires | 5.50x16 |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | - |
| Indus rear tires | - |
| Weight | 1500 lbs or 680 kg |
| Length | 80 inches [203 cm] |
| Width | 30 inches [76 cm] |
| Height | - |
| Wheelbase | 45 inches [114 cm] |
| Ground clearance | 9.5 inches [24 cm] |
| Turning radius | 6 feet [1.8 m] |
| Rear tread size | - |
| Front tread size | - |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 36.9 ci or 0.6 L |
| Cylinders | 1 cylinders |
| Engine power | 12 hp or 8.9 kW |
| Engine RPM | 2200 (rpm) |
| Torque | - | Torque RPM | - |
| Fuel type | diesel |
| Fuel injection | direct injection |
| Fuel tank size | 2.5 gal or 9.5 L |
| Oil capacity | - |
| Oil change | - |
| Starter motor | - |
| Starter volts | 12 V |
| Parts And Accessories | Holder Cultitrac A12 Parts |
| Batteries number | - |
| Batteries voltage | 12 V |
| Battries Amps | - |
| Cold Amps | - |
| Ground force | - |
| Charging system | - |
| Charging Volts | - |
| Charging Amps | - |
| Trans system | - |
| Trans type | - |
| Trans gears | 6 forward and 3 reverse |
| Clutch system | dry disc |
| Wheel drive | 4x4 articulated 4WD |
| Final drive | - |
| Steering | - |
| Braking system | drum |
| Cabin type | Open operator station |
| Differentiel lock | - |
| System | open center |
| Valves | - |
| Pump flow | 2.6 gpm or 9.8 lpm |
| SVC flow | - |
| Steering flow | - |
| Tank capacity | 1 gal or 3.8 L |
| Hydraulic pressure | 1850 psi or 127.6 bar |
| Max flow | - |
| Drawbar type | - |
| Claimed power | - |
| Drawbar horsepower | - |
| Fuel consumption | - |
| Pulling power | - |
| Claimed power | - |
| Real power | - |
| Engine @RPM | - |
| PTO Clutch | - |
| Rear PTO | independent |
| Rear PTO RPM | 540 (rpm) |
| Front PTO | - |
| Front PTO RPM | - |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | - |
| Hitch system | - |
| Rear hitch | - |
| Rear hitch lift | - |
| Front hitch | - |
| Front hitch lift | - |
Related tractor comparison
Holder Cultitrac A12 J.I. Case 300-B
Holder Cultitrac A12 International Harvester Cub Lo-Boy
Challenger 1042 Farmall 400
Challenger 1042 Farmall F-235
Challenger 1042 Farmall 240
Holder Cultitrac A12 Ford 960
Choose another tractor
Useful links and guides ....
- Challenger provided us with the latest version of its 1042 service repair manual
- Find All mechanical and electrical parts and accessories of Challenger 1042 farm-tractor here
- Get your Holder Cultitrac A12 manual book version
- Cabine, electrical And mechanical parts for Holder Cultitrac A12 farm-tractor here
