Challenger 1042 VS Allis Chalmers 160 specs comparison
Challenger 1042
General Infos| Make | Challenger |
| Model | 1042 |
| Country | United states |
| Production | From 2017 |
| Price | - |
| Tractor type | Row Crop tractor |
| Fuel | diesel |
| Service repair manual | Challenger 1042 Manual |
Dimensions, sizes and tires
| AG front tires | 420/85R38 |
| AG rear tires | 420/85R38 |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | - |
| Indus rear tires | - |
| Weight | 32734 lbs or 14848 kg |
| Length | 242 inches [614 cm] |
| Width | 118.2 inches [300 cm] |
| Height | - |
| Wheelbase | 130 inches [330 cm] |
| Ground clearance | - |
| Turning radius | - |
| Rear tread size | - |
| Front tread size | - |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 756.7 ci or 12.4 L |
| Cylinders | 6 cylinders |
| Engine power | 435 hp or 324.4 kW |
| Engine RPM | 1700 (rpm) |
| Torque | 1549 lb-ft or 2100.4 Nm | Torque RPM | 1450 (rpm) |
| Fuel type | diesel |
| Fuel injection | - |
| Fuel tank size | 211 gal or 798.6 L |
| Oil capacity | - |
| Oil change | - |
| Starter motor | electric |
| Starter volts | 24 V |
| Parts And Accessories | Challenger 1042 Parts |
| Batteries number | 2 |
| Batteries voltage | 12 V |
| Battries Amps | - |
| Cold Amps | - |
| Ground force | negative |
| Charging system | alternator |
| Charging Volts | - |
| Charging Amps | 320 amps |
| Trans system | Accu-VT |
| Trans type | continuously-variable transmission |
| Trans gears | infinite forward and reverse |
| Clutch system | - |
| Wheel drive | 4x4 MFWD 4WD |
| Final drive | - |
| Steering | power |
| Braking system | hydraulic wet disc |
| Cabin type | Cab standard with air-conditioning |
| Differentiel lock | - |
| System | load-sensing |
| Valves | up to 6 |
| Pump flow | 58 gpm or 219.5 lpm |
| SVC flow | - |
| Steering flow | - |
| Tank capacity | - |
| Hydraulic pressure | - |
| Max flow | - |
| Drawbar type | - |
| Claimed power | - |
| Drawbar horsepower | 348.5 hp or 259.9 kW |
| Fuel consumption | 20.1 gal/hour or 76.1 l/hour |
| Pulling power | 34110 lbs or 15472 kg |
| Claimed power | 386 hp or 287.8 kW |
| Real power | 408.7 hp or 304.8 kW |
| Engine @RPM | - |
| PTO Clutch | - |
| Rear PTO | independent |
| Rear PTO RPM | 1000 (rpm) |
| Front PTO | - |
| Front PTO RPM | - |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | 19.6 gal/hour or 74.2 l/hour |
| Hitch system | - |
| Rear hitch | IV/IVN |
| Rear hitch lift | 18631 lbs or 8451 kg |
| Front hitch | - |
| Front hitch lift | - |
Allis Chalmers 160
General Infos| Make | Allis Chalmers |
| Model | 160 |
| Country | United states |
| Production | From 1970 Until 1975 |
| Price | 6,215 USD |
| Tractor type | Farm/Agricultural tractor |
| Fuel | diesel |
| Service repair manual | Allis Chalmers 160 Manual |
Dimensions, sizes and tires
| AG front tires | 6.00-16 |
| AG rear tires | 13.6-28 |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | - |
| Indus rear tires | - |
| Weight | 4,250 lbs or 1927 kg |
| Length | 144 inches [365 cm] |
| Width | - |
| Height | - |
| Wheelbase | 76 inches [193 cm] |
| Ground clearance | - |
| Turning radius | - |
| Rear tread size | - |
| Front tread size | - |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 152.7 ci or 2.5 L |
| Cylinders | 3 cylinders |
| Engine power | 40 hp or 29.8 kW |
| Engine RPM | 2250 (rpm) |
| Torque | - | Torque RPM | - |
| Fuel type | diesel |
| Fuel injection | - |
| Fuel tank size | 13.5 gal or 51.1 L |
| Oil capacity | 6.5 qts or 6.2 L |
| Oil change | - |
| Starter motor | - |
| Starter volts | 12 V |
| Parts And Accessories | Allis Chalmers 160 Parts |
| Batteries number | 1 |
| Batteries voltage | 12 V |
| Battries Amps | 95 amps |
| Cold Amps | - |
| Ground force | negative |
| Charging system | Delco-Remy |
| Charging Volts | - |
| Charging Amps | - |
| Trans system | - |
| Trans type | partial synchronized |
| Trans gears | 6 forward and 1 reverse |
| Clutch system | - |
| Wheel drive | 4x2 2WD |
| Final drive | - |
| Steering | hydrostatic power |
| Braking system | differential mechanical dry disc |
| Cabin type | - |
| Differentiel lock | - |
| System | - |
| Valves | - |
| Pump flow | 6.7 gpm or 25.4 lpm |
| SVC flow | - |
| Steering flow | 7.5 gpm or 28.4 lpm |
| Tank capacity | 7.25 gal or 27.4 L |
| Hydraulic pressure | 2300 psi or 158.6 bar |
| Max flow | - |
| Drawbar type | - |
| Claimed power | - |
| Drawbar horsepower | 36.71 hp or 27.4 kW |
| Fuel consumption | 2.8 gal/hour or 10.6 l/hour |
| Pulling power | - |
| Claimed power | - |
| Real power | 39.77 hp or 29.7 kW |
| Engine @RPM | - |
| PTO Clutch | - |
| Rear PTO | live |
| Rear PTO RPM | 540 (rpm) |
| Front PTO | - |
| Front PTO RPM | - |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | 2.6 gal/hour or 9.8 l/hour |
| Hitch system | - |
| Rear hitch | II |
| Rear hitch lift | - |
| Front hitch | - |
| Front hitch lift | - |
Related tractor comparison
Allis Chalmers 160 Minneapolis-Moline G550
Allis Chalmers 160 Farmall 666
Challenger 1042 International Harvester 696
Challenger 1042 David Brown 1212
Challenger 1042 Fendt Favorit 4S
Challenger 1042 International Harvester 824
Choose another tractor
Useful links and guides ....
- Challenger provided us with the latest version of its 1042 service repair manual
- Find All mechanical and electrical parts and accessories of Challenger 1042 farm-tractor here
- Get your Allis Chalmers 160 manual book version
- Cabine, electrical And mechanical parts for Allis Chalmers 160 farm-tractor here