Challenger 1038 VS Allis Chalmers H3 specs comparison

Challenger 1038
General InfosMake | Challenger |
Model | 1038 |
Country | United states |
Production | From 2017 |
Price | - |
Tractor type | Row Crop tractor |
Fuel | diesel |
Service repair manual | Challenger 1038 Manual |
Dimensions, sizes and tires
AG front tires | 420/85R38 |
AG rear tires | 420/85R38 |
Lawn front tires | - |
Lawn rear tires | - |
Indus front tires | - |
Indus rear tires | - |
Weight | 32734 lbs or 14848 kg |
Length | 242 inches [614 cm] |
Width | 118.2 inches [300 cm] |
Height | - |
Wheelbase | 130 inches [330 cm] |
Ground clearance | - |
Turning radius | - |
Rear tread size | - |
Front tread size | - |
Turning radius | - |
Horsepower and engin specs
Engine capacity | 756.7 ci or 12.4 L |
Cylinders | 6 cylinders |
Engine power | 396 hp or 295.3 kW |
Engine RPM | 1700 (rpm) |
Torque | 1401 lb-ft or 1899.8 Nm | Torque RPM | 1450 (rpm) |
Fuel type | diesel |
Fuel injection | - |
Fuel tank size | 211 gal or 798.6 L |
Oil capacity | - |
Oil change | - |
Starter motor | electric |
Starter volts | 24 V |
Parts And Accessories | Challenger 1038 Parts |
Batteries number | 2 |
Batteries voltage | 12 V |
Battries Amps | - |
Cold Amps | - |
Ground force | negative |
Charging system | alternator |
Charging Volts | - |
Charging Amps | 320 amps |
Trans system | Accu-VT |
Trans type | continuously-variable transmission |
Trans gears | infinite forward and reverse |
Clutch system | - |
Wheel drive | 4x4 MFWD 4WD |
Final drive | - |
Steering | power |
Braking system | hydraulic wet disc |
Cabin type | Cab standard with air-conditioning |
Differentiel lock | - |
System | load-sensing |
Valves | up to 6 |
Pump flow | 58 gpm or 219.5 lpm |
SVC flow | - |
Steering flow | - |
Tank capacity | - |
Hydraulic pressure | - |
Max flow | - |
Drawbar type | - |
Claimed power | - |
Drawbar horsepower | 316.1 hp or 235.7 kW |
Fuel consumption | 18.5 gal/hour or 70.0 l/hour |
Pulling power | 33205 lbs or 15061 kg |
Claimed power | 350 hp or 261.0 kW |
Real power | 367.3 hp or 273.9 kW |
Engine @RPM | - |
PTO Clutch | - |
Rear PTO | independent |
Rear PTO RPM | 1000 (rpm) |
Front PTO | - |
Front PTO RPM | - |
Mid PTO | - |
Mid PTO RPM | - |
Fuel consumption | 17.9 gal/hour or 67.8 l/hour |
Hitch system | - |
Rear hitch | IV/IVN |
Rear hitch lift | 18631 lbs or 8451 kg |
Front hitch | - |
Front hitch lift | - |

Allis Chalmers H3
General InfosMake | Allis Chalmers |
Model | H3 |
Country | United states |
Production | From 1960 Until 1967 |
Price | - |
Tractor type | - |
Fuel | gasoline |
Service repair manual | Allis Chalmers H3 Manual |
Dimensions, sizes and tires
AG front tires | 7-inch track |
AG rear tires | 7-inch track |
Lawn front tires | - |
Lawn rear tires | - |
Indus front tires | - |
Indus rear tires | - |
Weight | 7395 lbs or 3354 kg |
Length | 108.75 inches [276 cm] |
Width | - |
Height | - |
Wheelbase | 64 inches [162 cm] |
Ground clearance | - |
Turning radius | - |
Rear tread size | 48 inches |
Front tread size | 48 inches |
Turning radius | - |
Horsepower and engin specs
Engine capacity | 149 ci or 2.4 L |
Cylinders | 4 cylinders |
Engine power | - |
Engine RPM | 1650 (rpm) |
Torque | - | Torque RPM | - |
Fuel type | gasoline |
Fuel injection | Marvel-Schebler carburetor |
Fuel tank size | 14 gal or 53.0 L |
Oil capacity | - |
Oil change | - |
Starter motor | electric |
Starter volts | 12 V |
Parts And Accessories | Allis Chalmers H3 Parts |
Batteries number | 1 |
Batteries voltage | 12 V |
Battries Amps | - |
Cold Amps | - |
Ground force | - |
Charging system | - |
Charging Volts | - |
Charging Amps | - |
Trans system | Power Director |
Trans type | mechanical shuttle |
Trans gears | 4 forward and reverse |
Clutch system | wet disc (Power Director) |
Wheel drive | crawler |
Final drive | - |
Steering | mechanical clutches |
Braking system | mechanical contracting band |
Cabin type | Open operator station |
Differentiel lock | - |
System | open center |
Valves | 1 to 3 |
Pump flow | 15 gpm or 56.8 lpm |
SVC flow | - |
Steering flow | - |
Tank capacity | 16.5 gal or 62.5 L |
Hydraulic pressure | - |
Max flow | - |
Drawbar type | - |
Claimed power | - |
Drawbar horsepower | 25.48 hp or 19.0 kW |
Fuel consumption | 2.9 gal/hour or 11.0 l/hour |
Pulling power | 7893 lbs or 3580 kg |
Claimed power | - |
Real power | 32.11 hp or 23.9 kW |
Engine @RPM | - |
PTO Clutch | - |
Rear PTO | optional |
Rear PTO RPM | 540 (rpm) |
Front PTO | - |
Front PTO RPM | - |
Mid PTO | - |
Mid PTO RPM | - |
Fuel consumption | 2.9 gal/hour or 11.0 l/hour |
Hitch system | - |
Rear hitch | - |
Rear hitch lift | - |
Front hitch | - |
Front hitch lift | - |
Related tractor comparison


Allis Chalmers H3 John Deere 8020


Allis Chalmers H3 Zetor 3045


Challenger 1038 Massey Ferguson 37


Challenger 1038 John Deere 4010


Allis Chalmers H3 Massey Ferguson 95


Challenger 1038 Chamberlain Champion 9G
Choose another tractor
Useful links and guides ....
- Challenger provided us with the latest version of its 1038 service repair manual
- Find All mechanical and electrical parts and accessories of Challenger 1038 farm-tractor here
- Get your Allis Chalmers H3 manual book version
- Cabine, electrical And mechanical parts for Allis Chalmers H3 farm-tractor here