CaseIH JX1095N VS New Holland Workmaster 75 specs comparison
CaseIH JX1095N
General Infos| Make | CaseIH |
| Model | JX1095N |
| Country | United states |
| Production | From 2005 Until 2008 |
| Price | - |
| Tractor type | Orchard/Vineyard tractor |
| Fuel | diesel |
| Service repair manual | CaseIH JX1095N Manual |
Dimensions, sizes and tires
| AG front tires | - |
| AG rear tires | - |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | - |
| Indus rear tires | - |
| Weight | 5820 lbs or 2639 kg |
| Length | 158 inches [401 cm] |
| Width | 53.4 inches [135 cm] |
| Height | 90.7 inches [230 cm] |
| Wheelbase | 85.6 inches [217 cm] |
| Ground clearance | 10.5 inches [26 cm] |
| Turning radius | - |
| Rear tread size | - |
| Front tread size | - |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 238 ci or 3.9 L |
| Cylinders | 4 cylinders |
| Engine power | 91 hp or 67.9 kW |
| Engine RPM | 2300 (rpm) |
| Torque | 264 lb-ft or 358.0 Nm | Torque RPM | 1400 (rpm) |
| Fuel type | diesel |
| Fuel injection | mechanical direct injection |
| Fuel tank size | 15 gal or 56.8 L |
| Oil capacity | - |
| Oil change | - |
| Starter motor | - |
| Starter volts | 12 V |
| Parts And Accessories | CaseIH JX1095N Parts |
| Batteries number | - |
| Batteries voltage | 12 V |
| Battries Amps | - |
| Cold Amps | 800 |
| Ground force | negative |
| Charging system | alternator |
| Charging Volts | - |
| Charging Amps | 65 amps |
| Trans system | mechanical shuttle |
| Trans type | - |
| Trans gears | 16 forward and reverse |
| Clutch system | - |
| Wheel drive | 4x4 MFWD 4WD |
| Final drive | - |
| Steering | power |
| Braking system | hydraulic wet disc |
| Cabin type | Two-post mid-mount foldable ROPS |
| Differentiel lock | electro-hydraulic rear |
| System | open center |
| Valves | 2 |
| Pump flow | 16.9 gpm or 64.0 lpm |
| SVC flow | - |
| Steering flow | 6.5 gpm or 24.6 lpm |
| Tank capacity | - |
| Hydraulic pressure | 2610 psi or 180.0 bar |
| Max flow | 23.4 gpm or 88.6 lpm |
| Drawbar type | - |
| Claimed power | - |
| Drawbar horsepower | - |
| Fuel consumption | - |
| Pulling power | - |
| Claimed power | 80 hp or 59.7 kW |
| Real power | - |
| Engine @RPM | - |
| PTO Clutch | mechanical dry disc |
| Rear PTO | independent |
| Rear PTO RPM | 540 (rpm) |
| Front PTO | - |
| Front PTO RPM | - |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | - |
| Hitch system | mechanical lower-link draft sensing |
| Rear hitch | II |
| Rear hitch lift | 3962 lbs or 1797 kg |
| Front hitch | - |
| Front hitch lift | - |
New Holland Workmaster 75
General Infos| Make | New Holland |
| Model | Workmaster 75 |
| Country | United states |
| Production | From 2010 Until 2014 |
| Price | - |
| Tractor type | Utility tractor |
| Fuel | diesel |
| Service repair manual | New Holland Workmaster 75 Manual |
Dimensions, sizes and tires
| AG front tires | 11.2x24 |
| AG rear tires | 16.9x30 |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | - |
| Indus rear tires | - |
| Weight | 5,059 lbs or 2294 kg |
| Length | 137.2 inches [348 cm] |
| Width | 78.4 inches [199 cm] |
| Height | 95.3 inches [242 cm] |
| Wheelbase | - |
| Ground clearance | - |
| Turning radius | - |
| Rear tread size | 59.7 to 80.2 inches |
| Front tread size | 59.6 to 79.6 inches |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 195 ci or 3.2 L |
| Cylinders | 4 cylinders |
| Engine power | 75 hp or 55.9 kW |
| Engine RPM | 2500 (rpm) |
| Torque | - | Torque RPM | - |
| Fuel type | diesel |
| Fuel injection | - |
| Fuel tank size | 16 gal or 60.6 L |
| Oil capacity | - |
| Oil change | - |
| Starter motor | electric |
| Starter volts | 12 V |
| Parts And Accessories | New Holland Workmaster 75 Parts |
| Batteries number | - |
| Batteries voltage | 12 V |
| Battries Amps | - |
| Cold Amps | 800 |
| Ground force | negative |
| Charging system | alternator |
| Charging Volts | 12 V |
| Charging Amps | 65 amps |
| Trans system | - |
| Trans type | partially synchronized |
| Trans gears | 8 forward and 2 reverse |
| Clutch system | 11-inch dry organic plate |
| Wheel drive | 4x4 MFWD 4WD |
| Final drive | - |
| Steering | hydrostatic power |
| Braking system | differential mechanical wet disc |
| Cabin type | Two-post foldable ROPS |
| Differentiel lock | mechanical rear lock engaged by foot pedal |
| System | open center fixed displacement |
| Valves | 1 or 2 |
| Pump flow | 10.4 gpm or 39.4 lpm |
| SVC flow | - |
| Steering flow | 8.3 gpm or 31.4 lpm |
| Tank capacity | - |
| Hydraulic pressure | - |
| Max flow | 18.7 gpm or 70.8 lpm |
| Drawbar type | - |
| Claimed power | - |
| Drawbar horsepower | - |
| Fuel consumption | - |
| Pulling power | - |
| Claimed power | 65 hp or 48.5 kW |
| Real power | 66.69 hp or 49.7 kW |
| Engine @RPM | - |
| PTO Clutch | - |
| Rear PTO | independent |
| Rear PTO RPM | 540 (rpm) |
| Front PTO | - |
| Front PTO RPM | - |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | 4.0 gal/hour or 15.1 l/hour |
| Hitch system | position control and mechanical draft sensing |
| Rear hitch | 2/1 |
| Rear hitch lift | 3,276 lbs or 1485 kg |
| Front hitch | - |
| Front hitch lift | - |
Related tractor comparison
New Holland Workmaster 75 John Deere 6210R
CaseIH JX1095N John Deere 8345R
New Holland Workmaster 75 McCormick Intl X70.70
CaseIH JX1095N John Deere 6115R
CaseIH JX1095N Kubota KB165
New Holland Workmaster 75 McCormick Intl CX100
Choose another tractor
Useful links and guides ....
- CaseIH provided us with the latest version of its JX1095N service repair manual
- Find All mechanical and electrical parts and accessories of CaseIH JX1095N farm-tractor here
- Get your New Holland Workmaster 75 manual book version
- Cabine, electrical And mechanical parts for New Holland Workmaster 75 farm-tractor here
