CaseIH Farmall 95 VS Deutz-Allis 8050 specs comparison
CaseIH Farmall 95
General Infos| Make | CaseIH |
| Model | Farmall 95 |
| Country | United states |
| Production | From 2008 |
| Price | - |
| Tractor type | Utility tractor |
| Fuel | diesel |
| Service repair manual | CaseIH Farmall 95 Manual |
Dimensions, sizes and tires
| AG front tires | - |
| AG rear tires | - |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | - |
| Indus rear tires | - |
| Weight | 6,107 lbs or 2770 kg |
| Length | - |
| Width | - |
| Height | 103.1 inches [261 cm] |
| Wheelbase | 92 inches [233 cm] |
| Ground clearance | - |
| Turning radius | - |
| Rear tread size | - |
| Front tread size | - |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 274 ci or 4.5 L |
| Cylinders | 4 cylinders |
| Engine power | 90 hp or 67.1 kW |
| Engine RPM | 2500 (rpm) |
| Torque | - | Torque RPM | - |
| Fuel type | diesel |
| Fuel injection | direct injection |
| Fuel tank size | 23.8 gal or 90.1 L |
| Oil capacity | - |
| Oil change | - |
| Starter motor | electric |
| Starter volts | 12 V |
| Parts And Accessories | CaseIH Farmall 95 Parts |
| Batteries number | 1 |
| Batteries voltage | 12 V |
| Battries Amps | - |
| Cold Amps | 800 |
| Ground force | negative |
| Charging system | alternator |
| Charging Volts | - |
| Charging Amps | 85 amps |
| Trans system | - |
| Trans type | mechanical shuttle with creeper |
| Trans gears | 20 forward and 12 reverse |
| Clutch system | mechanical dry disc |
| Wheel drive | 4x2 2WD |
| Final drive | - |
| Steering | hydrostatic power |
| Braking system | hydraulic wet disc |
| Cabin type | Flat deck platform with ROPS |
| Differentiel lock | mechanical rear lock |
| System | open center |
| Valves | 1 to 3 |
| Pump flow | 13.6 gpm or 51.5 lpm |
| SVC flow | - |
| Steering flow | 8.1 gpm or 30.7 lpm |
| Tank capacity | - |
| Hydraulic pressure | 2755 psi or 190.0 bar |
| Max flow | 21.7 gpm or 82.1 lpm |
| Drawbar type | - |
| Claimed power | - |
| Drawbar horsepower | 74.4 hp or 55.5 kW |
| Fuel consumption | 5.1 gal/hour or 19.3 l/hour |
| Pulling power | 7,415 lbs or 3363 kg |
| Claimed power | 80 hp or 59.7 kW |
| Real power | 80.6 hp or 60.1 kW |
| Engine @RPM | - |
| PTO Clutch | mechanical dry clutch |
| Rear PTO | independent |
| Rear PTO RPM | 540 (rpm) |
| Front PTO | - |
| Front PTO RPM | - |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | 5.2 gal/hour or 19.7 l/hour |
| Hitch system | position control and mechanical lower-link draft sensing |
| Rear hitch | 2 |
| Rear hitch lift | 5,025 lbs or 2279 kg |
| Front hitch | - |
| Front hitch lift | - |
Deutz-Allis 8050
General Infos| Make | Deutz-Allis |
| Model | 8050 |
| Country | Germany |
| Production | From 1985 Until 1988 |
| Price | 58,411 USD |
| Tractor type | Row Crop tractor |
| Fuel | diesel |
| Service repair manual | Deutz-Allis 8050 Manual |
Dimensions, sizes and tires
| AG front tires | 11.00-16 (2WD) |
| AG rear tires | 20.8-38 |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | - |
| Indus rear tires | - |
| Weight | 15305 lbs or 6942 kg |
| Length | 187 inches [474 cm] |
| Width | 95.5 inches [242 cm] |
| Height | 115 inches [292 cm] |
| Wheelbase | 96 inches [243 cm] |
| Ground clearance | - |
| Turning radius | - |
| Rear tread size | - |
| Front tread size | - |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 426 ci or 7.0 L |
| Cylinders | 6 cylinders |
| Engine power | - |
| Engine RPM | 2300 (rpm) |
| Torque | - | Torque RPM | - |
| Fuel type | diesel |
| Fuel injection | - |
| Fuel tank size | 60 gal or 227.1 L |
| Oil capacity | 19 qts or 18.0 L |
| Oil change | - |
| Starter motor | - |
| Starter volts | 12 V |
| Parts And Accessories | Deutz-Allis 8050 Parts |
| Batteries number | - |
| Batteries voltage | 12 V |
| Battries Amps | - |
| Cold Amps | - |
| Ground force | - |
| Charging system | alternator |
| Charging Volts | - |
| Charging Amps | 100 amps |
| Trans system | Power Shift |
| Trans type | Allis-Chalmers |
| Trans gears | 12 forward and 2 reverse |
| Clutch system | - |
| Wheel drive | 4x2 2WD |
| Final drive | - |
| Steering | hydrostatic power |
| Braking system | differential hydraulic wet discs |
| Cabin type | Acousta cab standard with heat and air-conditioning |
| Differentiel lock | foot-button |
| System | closed-center load-sensitive |
| Valves | 2 or 3 |
| Pump flow | 22 gpm or 83.3 lpm |
| SVC flow | - |
| Steering flow | 9.5 gpm or 36.0 lpm |
| Tank capacity | - |
| Hydraulic pressure | - |
| Max flow | 45 gpm or 170.3 lpm |
| Drawbar type | - |
| Claimed power | - |
| Drawbar horsepower | 131.44 hp or 98.0 kW |
| Fuel consumption | 9.6 gal/hour or 36.3 l/hour |
| Pulling power | 16,728 lbs or 7587 kg |
| Claimed power | - |
| Real power | 155.15 hp or 115.7 kW |
| Engine @RPM | - |
| PTO Clutch | - |
| Rear PTO | independent |
| Rear PTO RPM | 540 (rpm) |
| Front PTO | - |
| Front PTO RPM | - |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | 9.8 gal/hour or 37.1 l/hour |
| Hitch system | - |
| Rear hitch | III/II |
| Rear hitch lift | 6680 lbs or 3030 kg |
| Front hitch | - |
| Front hitch lift | - |
Related tractor comparison
Deutz-Allis 8050 Deutz-Fahr DX 3.50
Deutz-Allis 8050 Zetor 16145
CaseIH Farmall 95 Massey Ferguson 1020
CaseIH Farmall 95 Iseki TU200
Deutz-Allis 8050 Deutz-Allis 6240
Deutz-Allis 8050 Fiat 70-90
Choose another tractor
Useful links and guides ....
- CaseIH provided us with the latest version of its Farmall 95 service repair manual
- Find All mechanical and electrical parts and accessories of CaseIH Farmall 95 farm-tractor here
- Get your Deutz-Allis 8050 manual book version
- Cabine, electrical And mechanical parts for Deutz-Allis 8050 farm-tractor here
