CaseIH Farmall 80 VS Deutz-Allis 8050 specs comparison
CaseIH Farmall 80
General Infos| Make | CaseIH |
| Model | Farmall 80 |
| Country | United states |
| Production | From 2008 |
| Price | - |
| Tractor type | Utility tractor |
| Fuel | diesel |
| Service repair manual | CaseIH Farmall 80 Manual |
Dimensions, sizes and tires
| AG front tires | - |
| AG rear tires | - |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | - |
| Indus rear tires | - |
| Weight | 5,702 lbs or 2586 kg |
| Length | - |
| Width | - |
| Height | 103.1 inches [261 cm] |
| Wheelbase | 87 inches [220 cm] |
| Ground clearance | - |
| Turning radius | - |
| Rear tread size | - |
| Front tread size | - |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 238.5 ci or 3.9 L |
| Cylinders | 4 cylinders |
| Engine power | 72 hp or 53.7 kW |
| Engine RPM | 2500 (rpm) |
| Torque | - | Torque RPM | - |
| Fuel type | diesel |
| Fuel injection | direct injection |
| Fuel tank size | 23.8 gal or 90.1 L |
| Oil capacity | - |
| Oil change | - |
| Starter motor | electric |
| Starter volts | 12 V |
| Parts And Accessories | CaseIH Farmall 80 Parts |
| Batteries number | 1 |
| Batteries voltage | 12 V |
| Battries Amps | - |
| Cold Amps | 800 |
| Ground force | negative |
| Charging system | alternator |
| Charging Volts | - |
| Charging Amps | 85 amps |
| Trans system | - |
| Trans type | mechanical shuttle with creeper |
| Trans gears | 20 forward and 12 reverse |
| Clutch system | mechanical dry disc |
| Wheel drive | 4x2 2WD |
| Final drive | - |
| Steering | hydrostatic power |
| Braking system | hydraulic wet disc |
| Cabin type | Flat deck platform with ROPS |
| Differentiel lock | mechanical rear lock |
| System | open center |
| Valves | 1 to 3 |
| Pump flow | 13.6 gpm or 51.5 lpm |
| SVC flow | - |
| Steering flow | 8.1 gpm or 30.7 lpm |
| Tank capacity | - |
| Hydraulic pressure | - |
| Max flow | 21.7 gpm or 82.1 lpm |
| Drawbar type | - |
| Claimed power | - |
| Drawbar horsepower | 59.7 hp or 44.5 kW |
| Fuel consumption | 4.2 gal/hour or 15.9 l/hour |
| Pulling power | 4,795 lbs or 2175 kg |
| Claimed power | 62 hp or 46.2 kW |
| Real power | 70.9 hp or 52.9 kW |
| Engine @RPM | - |
| PTO Clutch | mechanical dry clutch |
| Rear PTO | independent |
| Rear PTO RPM | 540 (rpm) |
| Front PTO | - |
| Front PTO RPM | - |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | 4.1 gal/hour or 15.5 l/hour |
| Hitch system | position control and mechanical lower-link draft sensing |
| Rear hitch | 2 |
| Rear hitch lift | 5,025 lbs or 2279 kg |
| Front hitch | - |
| Front hitch lift | - |
Deutz-Allis 8050
General Infos| Make | Deutz-Allis |
| Model | 8050 |
| Country | Germany |
| Production | From 1985 Until 1988 |
| Price | 58,411 USD |
| Tractor type | Row Crop tractor |
| Fuel | diesel |
| Service repair manual | Deutz-Allis 8050 Manual |
Dimensions, sizes and tires
| AG front tires | 11.00-16 (2WD) |
| AG rear tires | 20.8-38 |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | - |
| Indus rear tires | - |
| Weight | 15305 lbs or 6942 kg |
| Length | 187 inches [474 cm] |
| Width | 95.5 inches [242 cm] |
| Height | 115 inches [292 cm] |
| Wheelbase | 96 inches [243 cm] |
| Ground clearance | - |
| Turning radius | - |
| Rear tread size | - |
| Front tread size | - |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 426 ci or 7.0 L |
| Cylinders | 6 cylinders |
| Engine power | - |
| Engine RPM | 2300 (rpm) |
| Torque | - | Torque RPM | - |
| Fuel type | diesel |
| Fuel injection | - |
| Fuel tank size | 60 gal or 227.1 L |
| Oil capacity | 19 qts or 18.0 L |
| Oil change | - |
| Starter motor | - |
| Starter volts | 12 V |
| Parts And Accessories | Deutz-Allis 8050 Parts |
| Batteries number | - |
| Batteries voltage | 12 V |
| Battries Amps | - |
| Cold Amps | - |
| Ground force | - |
| Charging system | alternator |
| Charging Volts | - |
| Charging Amps | 100 amps |
| Trans system | Power Shift |
| Trans type | Allis-Chalmers |
| Trans gears | 12 forward and 2 reverse |
| Clutch system | - |
| Wheel drive | 4x2 2WD |
| Final drive | - |
| Steering | hydrostatic power |
| Braking system | differential hydraulic wet discs |
| Cabin type | Acousta cab standard with heat and air-conditioning |
| Differentiel lock | foot-button |
| System | closed-center load-sensitive |
| Valves | 2 or 3 |
| Pump flow | 22 gpm or 83.3 lpm |
| SVC flow | - |
| Steering flow | 9.5 gpm or 36.0 lpm |
| Tank capacity | - |
| Hydraulic pressure | - |
| Max flow | 45 gpm or 170.3 lpm |
| Drawbar type | - |
| Claimed power | - |
| Drawbar horsepower | 131.44 hp or 98.0 kW |
| Fuel consumption | 9.6 gal/hour or 36.3 l/hour |
| Pulling power | 16,728 lbs or 7587 kg |
| Claimed power | - |
| Real power | 155.15 hp or 115.7 kW |
| Engine @RPM | - |
| PTO Clutch | - |
| Rear PTO | independent |
| Rear PTO RPM | 540 (rpm) |
| Front PTO | - |
| Front PTO RPM | - |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | 9.8 gal/hour or 37.1 l/hour |
| Hitch system | - |
| Rear hitch | III/II |
| Rear hitch lift | 6680 lbs or 3030 kg |
| Front hitch | - |
| Front hitch lift | - |
Related tractor comparison
Deutz-Allis 8050 Kubota B6200
Deutz-Allis 8050 J.I. Case 1394
CaseIH Farmall 80 International Harvester 7488
CaseIH Farmall 80 Iseki TU125F
CaseIH Farmall 80 Iseki TU245 Landhope
CaseIH Farmall 80 J.I. Case 1594
Choose another tractor
Useful links and guides ....
- CaseIH provided us with the latest version of its Farmall 80 service repair manual
- Find All mechanical and electrical parts and accessories of CaseIH Farmall 80 farm-tractor here
- Get your Deutz-Allis 8050 manual book version
- Cabine, electrical And mechanical parts for Deutz-Allis 8050 farm-tractor here
