CaseIH C50 VS Allis Chalmers HD3 specs comparison

CaseIH C50
General InfosMake | CaseIH |
Model | C50 |
Country | United states |
Production | From 1998 Until 2002 |
Price | 19,700 USD |
Tractor type | Utility tractor |
Fuel | diesel |
Service repair manual | CaseIH C50 Manual |
Dimensions, sizes and tires
AG front tires | 7.50-16 |
AG rear tires | 14.9-28 |
Lawn front tires | - |
Lawn rear tires | - |
Indus front tires | - |
Indus rear tires | - |
Weight | 5,357 lbs or 2429 kg |
Length | - |
Width | - |
Height | - |
Wheelbase | 80.9 inches [205 cm] (2WD) |
Ground clearance | - |
Turning radius | - |
Rear tread size | - |
Front tread size | - |
Turning radius | - |
Horsepower and engin specs
Engine capacity | 165 ci or 2.7 L |
Cylinders | 3 cylinders |
Engine power | 48 hp or 35.8 kW |
Engine RPM | 2250 (rpm) |
Torque | 140 lb-ft or 189.8 Nm | Torque RPM | 1200 (rpm) |
Fuel type | diesel |
Fuel injection | mechanical direct injection |
Fuel tank size | 20 gal or 75.7 L |
Oil capacity | 8 qts or 7.6 L |
Oil change | 250 h |
Starter motor | - |
Starter volts | 12 V |
Parts And Accessories | CaseIH C50 Parts |
Batteries number | 1 |
Batteries voltage | 12 V |
Battries Amps | - |
Cold Amps | 650 |
Ground force | negative |
Charging system | alternator |
Charging Volts | - |
Charging Amps | 65 amps |
Trans system | - |
Trans type | creeper |
Trans gears | 16 forward and 8 reverse |
Clutch system | 12-inch dry disc |
Wheel drive | 4x2 2WD |
Final drive | - |
Steering | hydrostatic power |
Braking system | differential hydraulic wet disc |
Cabin type | Two-post ROPS with straddle platform |
Differentiel lock | mechanical |
System | open center |
Valves | 0 to 3 |
Pump flow | 12.7 gpm or 48.1 lpm |
SVC flow | - |
Steering flow | - |
Tank capacity | 9 gal or 34.1 L |
Hydraulic pressure | 2500 psi or 172.4 bar |
Max flow | 15.7 gpm or 59.4 lpm |
Drawbar type | - |
Claimed power | - |
Drawbar horsepower | 35.4 hp or 26.4 kW |
Fuel consumption | 2.8 gal/hour or 10.6 l/hour |
Pulling power | 7,990 lbs or 3624 kg |
Claimed power | 40 hp or 29.8 kW |
Real power | 40.9 hp or 30.5 kW |
Engine @RPM | - |
PTO Clutch | hydraulic wet disc |
Rear PTO | independent |
Rear PTO RPM | 540 (rpm) |
Front PTO | - |
Front PTO RPM | - |
Mid PTO | - |
Mid PTO RPM | - |
Fuel consumption | 2.6 gal/hour or 9.8 l/hour |
Hitch system | mechanical |
Rear hitch | II/I |
Rear hitch lift | 3,665 lbs or 1662 kg |
Front hitch | - |
Front hitch lift | - |

Allis Chalmers HD3
General InfosMake | Allis Chalmers |
Model | HD3 |
Country | United states |
Production | From 1960 Until 1968 |
Price | - |
Tractor type | - |
Fuel | diesel |
Service repair manual | Allis Chalmers HD3 Manual |
Dimensions, sizes and tires
AG front tires | 7-inch track |
AG rear tires | 7-inch track |
Lawn front tires | - |
Lawn rear tires | - |
Indus front tires | - |
Indus rear tires | - |
Weight | 7645 lbs or 3467 kg |
Length | 108.75 inches [276 cm] |
Width | - |
Height | - |
Wheelbase | - |
Ground clearance | - |
Turning radius | - |
Rear tread size | 48 inches |
Front tread size | 48 inches |
Turning radius | - |
Horsepower and engin specs
Engine capacity | 175 ci or 2.9 L |
Cylinders | 4 cylinders |
Engine power | - |
Engine RPM | 1650 (rpm) |
Torque | - | Torque RPM | - |
Fuel type | diesel |
Fuel injection | Roosa-Master injection |
Fuel tank size | 14 gal or 53.0 L |
Oil capacity | - |
Oil change | - |
Starter motor | electric |
Starter volts | 12 V |
Parts And Accessories | Allis Chalmers HD3 Parts |
Batteries number | 2 |
Batteries voltage | 6 V |
Battries Amps | - |
Cold Amps | - |
Ground force | - |
Charging system | - |
Charging Volts | - |
Charging Amps | - |
Trans system | Power Director |
Trans type | mechanical shuttle |
Trans gears | 4 forward and reverse |
Clutch system | wet disc (Power Director) |
Wheel drive | crawler |
Final drive | - |
Steering | mechanical clutches |
Braking system | mechanical contracting band |
Cabin type | Open operator station |
Differentiel lock | - |
System | open center |
Valves | 1 to 3 |
Pump flow | 15 gpm or 56.8 lpm |
SVC flow | - |
Steering flow | - |
Tank capacity | 16.5 gal or 62.5 L |
Hydraulic pressure | - |
Max flow | - |
Drawbar type | - |
Claimed power | - |
Drawbar horsepower | 26.17 hp or 19.5 kW |
Fuel consumption | 2.6 gal/hour or 9.8 l/hour |
Pulling power | 8207 lbs or 3722 kg |
Claimed power | - |
Real power | 32.53 hp or 24.3 kW |
Engine @RPM | - |
PTO Clutch | - |
Rear PTO | optional |
Rear PTO RPM | 540 (rpm) |
Front PTO | - |
Front PTO RPM | - |
Mid PTO | - |
Mid PTO RPM | - |
Fuel consumption | 2.6 gal/hour or 9.8 l/hour |
Hitch system | - |
Rear hitch | - |
Rear hitch lift | - |
Front hitch | - |
Front hitch lift | - |
Related tractor comparison


Allis Chalmers HD3 Renault N70


CaseIH C50 Farmall Super Cub


CaseIH C50 Oliver 440


CaseIH C50 John Deere 3010


Allis Chalmers HD3 Oliver 770


Allis Chalmers HD3 Cockshutt 570 Super
Choose another tractor
Useful links and guides ....
- CaseIH provided us with the latest version of its C50 service repair manual
- Find All mechanical and electrical parts and accessories of CaseIH C50 farm-tractor here
- Get your Allis Chalmers HD3 manual book version
- Cabine, electrical And mechanical parts for Allis Chalmers HD3 farm-tractor here