Allis Chalmers HD3 VS Ford 6410 Mark III specs comparison
Allis Chalmers HD3
General Infos| Make | Allis Chalmers |
| Model | HD3 |
| Country | United states |
| Production | From 1960 Until 1968 |
| Price | - |
| Tractor type | - |
| Fuel | diesel |
| Service repair manual | Allis Chalmers HD3 Manual |
Dimensions, sizes and tires
| AG front tires | 7-inch track |
| AG rear tires | 7-inch track |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | - |
| Indus rear tires | - |
| Weight | 7645 lbs or 3467 kg |
| Length | 108.75 inches [276 cm] |
| Width | - |
| Height | - |
| Wheelbase | - |
| Ground clearance | - |
| Turning radius | - |
| Rear tread size | 48 inches |
| Front tread size | 48 inches |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 175 ci or 2.9 L |
| Cylinders | 4 cylinders |
| Engine power | - |
| Engine RPM | 1650 (rpm) |
| Torque | - | Torque RPM | - |
| Fuel type | diesel |
| Fuel injection | Roosa-Master injection |
| Fuel tank size | 14 gal or 53.0 L |
| Oil capacity | - |
| Oil change | - |
| Starter motor | electric |
| Starter volts | 12 V |
| Parts And Accessories | Allis Chalmers HD3 Parts |
| Batteries number | 2 |
| Batteries voltage | 6 V |
| Battries Amps | - |
| Cold Amps | - |
| Ground force | - |
| Charging system | - |
| Charging Volts | - |
| Charging Amps | - |
| Trans system | Power Director |
| Trans type | mechanical shuttle |
| Trans gears | 4 forward and reverse |
| Clutch system | wet disc (Power Director) |
| Wheel drive | crawler |
| Final drive | - |
| Steering | mechanical clutches |
| Braking system | mechanical contracting band |
| Cabin type | Open operator station |
| Differentiel lock | - |
| System | open center |
| Valves | 1 to 3 |
| Pump flow | 15 gpm or 56.8 lpm |
| SVC flow | - |
| Steering flow | - |
| Tank capacity | 16.5 gal or 62.5 L |
| Hydraulic pressure | - |
| Max flow | - |
| Drawbar type | - |
| Claimed power | - |
| Drawbar horsepower | 26.17 hp or 19.5 kW |
| Fuel consumption | 2.6 gal/hour or 9.8 l/hour |
| Pulling power | 8207 lbs or 3722 kg |
| Claimed power | - |
| Real power | 32.53 hp or 24.3 kW |
| Engine @RPM | - |
| PTO Clutch | - |
| Rear PTO | optional |
| Rear PTO RPM | 540 (rpm) |
| Front PTO | - |
| Front PTO RPM | - |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | 2.6 gal/hour or 9.8 l/hour |
| Hitch system | - |
| Rear hitch | - |
| Rear hitch lift | - |
| Front hitch | - |
| Front hitch lift | - |
Ford 6410 Mark III
General Infos| Make | Ford |
| Model | 6410 Mark III |
| Country | United states |
| Production | From 1988 Until 1991 |
| Price | - |
| Tractor type | - |
| Fuel | diesel |
| Service repair manual | Ford 6410 Mark III Manual |
Dimensions, sizes and tires
| AG front tires | 10.00-16 (2WD) |
| AG rear tires | 16.9-34 |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | - |
| Indus rear tires | - |
| Weight | 7540 lbs or 3420 kg |
| Length | 116 inches [294 cm] |
| Width | - |
| Height | 106.3 inches [270 cm] |
| Wheelbase | 87.4 inches [221 cm] |
| Ground clearance | - |
| Turning radius | 26.9 feet [8.2 m] |
| Rear tread size | - |
| Front tread size | - |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 268.1 ci or 4.4 L |
| Cylinders | 4 cylinders |
| Engine power | 80 hp or 59.7 kW |
| Engine RPM | 2070 (rpm) |
| Torque | 217.6 lb-ft or 295.1 Nm | Torque RPM | 1200 (rpm) |
| Fuel type | diesel |
| Fuel injection | - |
| Fuel tank size | 28 gal or 106.0 L |
| Oil capacity | - |
| Oil change | - |
| Starter motor | - |
| Starter volts | 12 V |
| Parts And Accessories | Ford 6410 Mark III Parts |
| Batteries number | - |
| Batteries voltage | 12 V |
| Battries Amps | - |
| Cold Amps | - |
| Ground force | negative |
| Charging system | - |
| Charging Volts | - |
| Charging Amps | - |
| Trans system | - |
| Trans type | - |
| Trans gears | 16 forward and 8 reverse |
| Clutch system | - |
| Wheel drive | 4x2 2WD |
| Final drive | - |
| Steering | power |
| Braking system | wet disc |
| Cabin type | - |
| Differentiel lock | - |
| System | - |
| Valves | - |
| Pump flow | 18.2 gpm or 68.9 lpm |
| SVC flow | - |
| Steering flow | - |
| Tank capacity | - |
| Hydraulic pressure | - |
| Max flow | - |
| Drawbar type | - |
| Claimed power | - |
| Drawbar horsepower | - |
| Fuel consumption | - |
| Pulling power | - |
| Claimed power | - |
| Real power | - |
| Engine @RPM | - |
| PTO Clutch | - |
| Rear PTO | - |
| Rear PTO RPM | 540 (rpm) |
| Front PTO | - |
| Front PTO RPM | - |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | - |
| Hitch system | - |
| Rear hitch | - |
| Rear hitch lift | 5,666 lbs or 2570 kg |
| Front hitch | - |
| Front hitch lift | - |
Related tractor comparison
Allis Chalmers HD3 John Deere 1550
Ford 6410 Mark III Iseki SX55
Allis Chalmers HD3 Kubota M1-75
Allis Chalmers HD3 Deutz-Allis 7120
Ford 6410 Mark III Massey Ferguson 390
Ford 6410 Mark III Massey Ferguson 3120
Choose another tractor
Useful links and guides ....
- Allis Chalmers provided us with the latest version of its HD3 service repair manual
- Find All mechanical and electrical parts and accessories of Allis Chalmers HD3 farm-tractor here
- Get your Ford 6410 Mark III manual book version
- Cabine, electrical And mechanical parts for Ford 6410 Mark III farm-tractor here
