Allis Chalmers H3 VS AGCO DT275B specs comparison
Allis Chalmers H3
General Infos| Make | Allis Chalmers |
| Model | H3 |
| Country | United states |
| Production | From 1960 Until 1967 |
| Price | - |
| Tractor type | - |
| Fuel | gasoline |
| Service repair manual | Allis Chalmers H3 Manual |
Dimensions, sizes and tires
| AG front tires | 7-inch track |
| AG rear tires | 7-inch track |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | - |
| Indus rear tires | - |
| Weight | 7395 lbs or 3354 kg |
| Length | 108.75 inches [276 cm] |
| Width | - |
| Height | - |
| Wheelbase | 64 inches [162 cm] |
| Ground clearance | - |
| Turning radius | - |
| Rear tread size | 48 inches |
| Front tread size | 48 inches |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 149 ci or 2.4 L |
| Cylinders | 4 cylinders |
| Engine power | - |
| Engine RPM | 1650 (rpm) |
| Torque | - | Torque RPM | - |
| Fuel type | gasoline |
| Fuel injection | Marvel-Schebler carburetor |
| Fuel tank size | 14 gal or 53.0 L |
| Oil capacity | - |
| Oil change | - |
| Starter motor | electric |
| Starter volts | 12 V |
| Parts And Accessories | Allis Chalmers H3 Parts |
| Batteries number | 1 |
| Batteries voltage | 12 V |
| Battries Amps | - |
| Cold Amps | - |
| Ground force | - |
| Charging system | - |
| Charging Volts | - |
| Charging Amps | - |
| Trans system | Power Director |
| Trans type | mechanical shuttle |
| Trans gears | 4 forward and reverse |
| Clutch system | wet disc (Power Director) |
| Wheel drive | crawler |
| Final drive | - |
| Steering | mechanical clutches |
| Braking system | mechanical contracting band |
| Cabin type | Open operator station |
| Differentiel lock | - |
| System | open center |
| Valves | 1 to 3 |
| Pump flow | 15 gpm or 56.8 lpm |
| SVC flow | - |
| Steering flow | - |
| Tank capacity | 16.5 gal or 62.5 L |
| Hydraulic pressure | - |
| Max flow | - |
| Drawbar type | - |
| Claimed power | - |
| Drawbar horsepower | 25.48 hp or 19.0 kW |
| Fuel consumption | 2.9 gal/hour or 11.0 l/hour |
| Pulling power | 7893 lbs or 3580 kg |
| Claimed power | - |
| Real power | 32.11 hp or 23.9 kW |
| Engine @RPM | - |
| PTO Clutch | - |
| Rear PTO | optional |
| Rear PTO RPM | 540 (rpm) |
| Front PTO | - |
| Front PTO RPM | - |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | 2.9 gal/hour or 11.0 l/hour |
| Hitch system | - |
| Rear hitch | - |
| Rear hitch lift | - |
| Front hitch | - |
| Front hitch lift | - |
AGCO DT275B
General Infos| Make | AGCO |
| Model | DT275B |
| Country | United states |
| Production | From 2009 Until 2010 |
| Price | - |
| Tractor type | Row Crop tractor |
| Fuel | diesel |
| Service repair manual | AGCO DT275B Manual |
Dimensions, sizes and tires
| AG front tires | 480/70R34 |
| AG rear tires | 520/85R46 |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | - |
| Indus rear tires | - |
| Weight | 24,250 lbs or 10999 kg |
| Length | 215.7 inches [547 cm] |
| Width | - |
| Height | 141 inches [358 cm] |
| Wheelbase | 122.2 inches [310 cm] |
| Ground clearance | - |
| Turning radius | - |
| Rear tread size | - |
| Front tread size | - |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 512.6 ci or 8.4 L |
| Cylinders | 6 cylinders |
| Engine power | 320 hp or 238.6 kW |
| Engine RPM | 2200 (rpm) |
| Torque | 1100 lb-ft or 1491.6 Nm | Torque RPM | 1500 (rpm) |
| Fuel type | diesel |
| Fuel injection | high-pressure common rail |
| Fuel tank size | 155.9 gal or 590.1 L |
| Oil capacity | - |
| Oil change | - |
| Starter motor | electric |
| Starter volts | 12 V |
| Parts And Accessories | AGCO DT275B Parts |
| Batteries number | - |
| Batteries voltage | 12 V |
| Battries Amps | - |
| Cold Amps | - |
| Ground force | negative |
| Charging system | alternator |
| Charging Volts | - |
| Charging Amps | 240 amps |
| Trans system | PowerMaxx CVT |
| Trans type | continuously variable transmission |
| Trans gears | infinite forward and reverse |
| Clutch system | - |
| Wheel drive | 4x4 MFWD 4WD |
| Final drive | inboard planetary |
| Steering | hydrostatic power |
| Braking system | hydraulic wet disc |
| Cabin type | Cab standard with heat and air-conditioning |
| Differentiel lock | full locking electro-hydraulic front and rear |
| System | closed center load sensing |
| Valves | 4 to 6 |
| Pump flow | - |
| SVC flow | 26.4 gpm or 99.9 lpm |
| Steering flow | - |
| Tank capacity | - |
| Hydraulic pressure | 2,901 psi or 200.0 bar |
| Max flow | 46.2 gpm or 174.9 lpm |
| Drawbar type | Category 3 standard |
| Claimed power | - |
| Drawbar horsepower | 236.3 hp or 176.2 kW |
| Fuel consumption | 17.2 gal/hour or 65.1 l/hour |
| Pulling power | 33,685 lbs or 15279 kg |
| Claimed power | 275 hp or 205.1 kW |
| Real power | 305.6 hp or 227.9 kW |
| Engine @RPM | 1000@1970 (rpm) |
| PTO Clutch | electro-hydraulic |
| Rear PTO | independent |
| Rear PTO RPM | 1000E (rpm) |
| Front PTO | optional |
| Front PTO RPM | 1000 (rpm) |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | 17.3 gal/hour or 65.5 l/hour |
| Hitch system | - |
| Rear hitch | 3 |
| Rear hitch lift | 26,460 lbs or 12002 kg |
| Front hitch | 3 |
| Front hitch lift | 11,020 lbs or 4998 kg |
Related tractor comparison
AGCO DT275B McCormick Intl T110 Max
Allis Chalmers H3 Claas Axion 930
Allis Chalmers H3 Terrion ATM 7360
Allis Chalmers H3 Zetor Proxima Plus 10541
Allis Chalmers H3 McCormick Intl F110
Allis Chalmers H3 CaseIH Puma 160
Choose another tractor
Useful links and guides ....
- Allis Chalmers provided us with the latest version of its H3 service repair manual
- Find All mechanical and electrical parts and accessories of Allis Chalmers H3 farm-tractor here
- Get your AGCO DT275B manual book version
- Cabine, electrical And mechanical parts for AGCO DT275B farm-tractor here
