Allis Chalmers D10 VS Steiger Panther III PTA-325 specs comparison

Allis Chalmers D10 1959 comparison online with competitors

Allis Chalmers D10

General Infos
Make Allis Chalmers
Model D10
Country United states
Production From 1959  Until 1967
Price 3400  USD
Tractor type Row Crop tractor
Fuel gasoline
Service repair manual Allis Chalmers D10 Manual

Dimensions, sizes and tires
AG front tires 5.00x15
AG rear tires 10x24
Lawn front tires -
Lawn rear tires -
Indus front tires -
Indus rear tires -
Weight 2,700 lbs or 1224 kg
Length 120.5 inches [306 cm]
Width -
Height -
Wheelbase 78.75 inches [200 cm]
Ground clearance -
Turning radius -
Rear tread size 42 to 72 inches
Front tread size 40 to 64.7 inches
Turning radius -

Horsepower and engin specs
Engine capacity 149 ci or 2.4 L
Cylinders 4 cylinders
Engine power 31 hp or 23.1 kW
Engine RPM 1650 (rpm)
Torque -
Torque RPM -
Fuel type gasoline
Fuel injection -
Fuel tank size 12 gal or 45.4 L
Oil capacity 4 qts or 3.8 L
Oil change -
Starter motor -
Starter volts 12 V
Parts And Accessories Allis Chalmers D10 Parts
Electrical and battery specs
Batteries number 1
Batteries voltage 6 V
Battries Amps -
Cold Amps -
Ground force -
Charging system -
Charging Volts -
Charging Amps -
Clutch and gearbox specs
Trans system -
Trans type sliding gear
Trans gears 4 forward and 1 reverse
Clutch system -
Cabine and mechanical specs
Wheel drive 4x2 2WD
Final drive -
Steering manual
Braking system differential mechanical shoe
Cabin type Open operator station
Differentiel lock -
Hydraulics specifications
System live
Valves 1 or 2
Pump flow -
SVC flow -
Steering flow -
Tank capacity -
Hydraulic pressure -
Max flow -
Drawbar specifications
Drawbar type -
Claimed power 26 hp or 19.4 kW
Drawbar horsepower 28.78 hp or 21.5 kW
Fuel consumption 2.5 gal/hour or 9.5 l/hour
Pulling power 4,106 lbs or 1862 kg
Power take-off (PTO) specs
Claimed power 30.1 hp or 22.4 kW
Real power 33.46 hp or 25.0 kW
Engine @RPM -
PTO Clutch -
Rear PTO transmission
Rear PTO RPM 540 (rpm)
Front PTO -
Front PTO RPM -
Mid PTO -
Mid PTO RPM -
Fuel consumption 2.6 gal/hour or 9.8 l/hour
3 point hitch specifiations
Hitch system -
Rear hitch I
Rear hitch lift -
Front hitch -
Front hitch lift -

Steiger Panther III PTA-325 1980 comparison online with competitors

Steiger Panther III PTA-325

General Infos
Make Steiger
Model Panther III PTA-325
Country United states
Production From 1980  Until 1982
Price -
Tractor type Four wheel Drive (4WD) tractor
Fuel diesel
Service repair manual Steiger Panther III PTA-325 Manual

Dimensions, sizes and tires
AG front tires 18.4x30
AG rear tires 18.4x30
Lawn front tires -
Lawn rear tires -
Indus front tires -
Indus rear tires -
Weight 29605 lbs or 13428 kg
Length 264.5 inches [671 cm]
Width 52 inches [132 cm]
Height 134.7 inches [342 cm]
Wheelbase 132.5 inches [336 cm]
Ground clearance -
Turning radius -
Rear tread size -
Front tread size -
Turning radius -

Horsepower and engin specs
Engine capacity 893 ci or 14.6 L
Cylinders 6 cylinders
Engine power 325 hp or 242.4 kW
Engine RPM 2100 (rpm)
Torque 1015 lb-ft or 1376.3 Nm
Torque RPM 1200 (rpm)
Fuel type diesel
Fuel injection direct injection
Fuel tank size 225 gal or 851.6 L
Oil capacity 36 qts or 34.1 L
Oil change -
Starter motor -
Starter volts 12 V
Parts And Accessories Steiger Panther III PTA-325 Parts
Electrical and battery specs
Batteries number 4
Batteries voltage 12 V
Battries Amps -
Cold Amps 475
Ground force negative
Charging system Delco-Remy alternator
Charging Volts -
Charging Amps 90 amps
Clutch and gearbox specs
Trans system Allison HT 754
Trans type power shift with torque converter
Trans gears 10 forward and 2 reverse
Clutch system -
Cabine and mechanical specs
Wheel drive 4x4 articulated 4WD
Final drive outboard planetary
Steering articulated power
Braking system hydraulic disc
Cabin type Safari Cab standard with air-conditioning
Differentiel lock -
Hydraulics specifications
System open center
Valves 3 to 5
Pump flow 29.3 gpm or 110.9 lpm
SVC flow 8 gpm or 30.3 lpm
Steering flow -
Tank capacity 22 gal or 83.3 L
Hydraulic pressure 2250 psi or 155.1 bar
Max flow -
Drawbar specifications
Drawbar type -
Claimed power -
Drawbar horsepower -
Fuel consumption -
Pulling power -
Power take-off (PTO) specs
Claimed power -
Real power -
Engine @RPM -
PTO Clutch -
Rear PTO -
Rear PTO RPM -
Front PTO -
Front PTO RPM -
Mid PTO -
Mid PTO RPM -
Fuel consumption -
3 point hitch specifiations
Hitch system -
Rear hitch III
Rear hitch lift -
Front hitch -
Front hitch lift -

Related tractor comparison


1959 Allis Chalmers D10 competitors and comparison tool online specs and performance
1977 Yanmar YM2210 competitors and comparison tool online specs and performance

Allis Chalmers D10 Yanmar YM2210

1959 Allis Chalmers D10 competitors and comparison tool online specs and performance
1979 Fiat 44-33 competitors and comparison tool online specs and performance

Allis Chalmers D10 Fiat 44-33

1959 Allis Chalmers D10 competitors and comparison tool online specs and performance
1981 Hesston 1380 competitors and comparison tool online specs and performance

Allis Chalmers D10 Hesston 1380

1980 Steiger Panther III PTA-325 competitors and comparison tool online specs and performance
1982 Renault 95-14 TX competitors and comparison tool online specs and performance

Steiger Panther III PTA-325 Renault 95-14 TX

1980 Steiger Panther III PTA-325 competitors and comparison tool online specs and performance
1977 Renault 981 competitors and comparison tool online specs and performance

Steiger Panther III PTA-325 Renault 981

1980 Steiger Panther III PTA-325 competitors and comparison tool online specs and performance
1979 Raba 250 competitors and comparison tool online specs and performance

Steiger Panther III PTA-325 Raba 250


Choose another tractor









Useful links and guides ....