Allis Chalmers 8030 VS Minneapolis-Moline G1050 specs comparison
Allis Chalmers 8030
General Infos| Make | Allis Chalmers |
| Model | 8030 |
| Country | United states |
| Production | From 1982 Until 1985 |
| Price | 52,398 USD |
| Tractor type | - |
| Fuel | diesel |
| Service repair manual | Allis Chalmers 8030 Manual |
Dimensions, sizes and tires
| AG front tires | 11.00-16 (2WD) |
| AG rear tires | 20.8-38 |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | - |
| Indus rear tires | - |
| Weight | 14,200 lbs or 6441 kg |
| Length | 187 inches [474 cm] |
| Width | 93.4 inches [237 cm] |
| Height | 115 inches [292 cm] |
| Wheelbase | 106 inches [269 cm] (2WD) |
| Ground clearance | 17.5 inches [44 cm] (4WD front axle) |
| Turning radius | - |
| Rear tread size | - |
| Front tread size | - |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 426 ci or 7.0 L |
| Cylinders | 6 cylinders |
| Engine power | - |
| Engine RPM | 2300 (rpm) |
| Torque | - | Torque RPM | - |
| Fuel type | diesel |
| Fuel injection | - |
| Fuel tank size | 60 gal or 227.1 L |
| Oil capacity | 19 qts or 18.0 L |
| Oil change | - |
| Starter motor | - |
| Starter volts | 12 V |
| Parts And Accessories | Allis Chalmers 8030 Parts |
| Batteries number | - |
| Batteries voltage | 12 V |
| Battries Amps | - |
| Cold Amps | - |
| Ground force | - |
| Charging system | alternator |
| Charging Volts | - |
| Charging Amps | 100 amps |
| Trans system | Power Shift |
| Trans type | Allis-Chalmers |
| Trans gears | 12 forward and 2 reverse |
| Clutch system | - |
| Wheel drive | 4x2 2WD |
| Final drive | - |
| Steering | hydrostatic power |
| Braking system | differential hydraulic wet discs |
| Cabin type | Acousta cab standard with heat and air-conditioning |
| Differentiel lock | foot-button |
| System | closed-center load-sensitive |
| Valves | 2 or 3 |
| Pump flow | 22 gpm or 83.3 lpm |
| SVC flow | - |
| Steering flow | 9.5 gpm or 36.0 lpm |
| Tank capacity | - |
| Hydraulic pressure | - |
| Max flow | 45 gpm or 170.3 lpm |
| Drawbar type | - |
| Claimed power | - |
| Drawbar horsepower | 115.22 hp or 85.9 kW |
| Fuel consumption | 8.9 gal/hour or 33.7 l/hour |
| Pulling power | 13,348 lbs or 6054 kg |
| Claimed power | - |
| Real power | 134.42 hp or 100.2 kW |
| Engine @RPM | - |
| PTO Clutch | - |
| Rear PTO | independent |
| Rear PTO RPM | 540 (rpm) |
| Front PTO | - |
| Front PTO RPM | - |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | 8.8 gal/hour or 33.3 l/hour |
| Hitch system | - |
| Rear hitch | III/II |
| Rear hitch lift | 6,680 lbs or 3030 kg |
| Front hitch | - |
| Front hitch lift | - |
Minneapolis-Moline G1050
General Infos| Make | Minneapolis-Moline |
| Model | G1050 |
| Country | England |
| Production | From 1969 Until 1971 |
| Price | - |
| Tractor type | Row Crop tractor |
| Fuel | diesel |
| Service repair manual | Minneapolis-Moline G1050 Manual |
Dimensions, sizes and tires
| AG front tires | 7.50-16 |
| AG rear tires | 18.4-34 |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | - |
| Indus rear tires | - |
| Weight | 11200 lbs or 5080 kg |
| Length | 171 inches [434 cm] |
| Width | 94.3 inches [239 cm] |
| Height | - |
| Wheelbase | 103.75 inches [263 cm] |
| Ground clearance | - |
| Turning radius | - |
| Rear tread size | 60 to 90 inches |
| Front tread size | 56 to 80 inches |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 504 ci or 8.3 L |
| Cylinders | 6 cylinders |
| Engine power | - |
| Engine RPM | 1800 (rpm) |
| Torque | - | Torque RPM | - |
| Fuel type | diesel |
| Fuel injection | - |
| Fuel tank size | 40 gal or 151.4 L |
| Oil capacity | 13 qts or 12.3 L |
| Oil change | - |
| Starter motor | - |
| Starter volts | 12 V |
| Parts And Accessories | Minneapolis-Moline G1050 Parts |
| Batteries number | - |
| Batteries voltage | 12 V |
| Battries Amps | - |
| Cold Amps | - |
| Ground force | negative |
| Charging system | alternator |
| Charging Volts | - |
| Charging Amps | - |
| Trans system | Ampli-Torc |
| Trans type | three-speed power shift |
| Trans gears | 15 forward and 3 reverse |
| Clutch system | 355.6mm dry disc |
| Wheel drive | 4x2 2WD |
| Final drive | - |
| Steering | power |
| Braking system | disc |
| Cabin type | Open operator station |
| Differentiel lock | - |
| System | closed |
| Valves | 2 or 3 |
| Pump flow | - |
| SVC flow | - |
| Steering flow | - |
| Tank capacity | - |
| Hydraulic pressure | - |
| Max flow | - |
| Drawbar type | - |
| Claimed power | 102 hp or 76.1 kW |
| Drawbar horsepower | 97.37 hp or 72.6 kW |
| Fuel consumption | 11.5 gal/hour or 43.5 l/hour |
| Pulling power | 14,006 lbs or 6353 kg |
| Claimed power | 110 hp or 82.0 kW |
| Real power | 110.76 hp or 82.6 kW |
| Engine @RPM | - |
| PTO Clutch | wet disc |
| Rear PTO | independent |
| Rear PTO RPM | 1000 (rpm) |
| Front PTO | - |
| Front PTO RPM | - |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | 11.4 gal/hour or 43.1 l/hour |
| Hitch system | - |
| Rear hitch | III/II |
| Rear hitch lift | - |
| Front hitch | - |
| Front hitch lift | - |
Related tractor comparison
Minneapolis-Moline G1050 John Deere 4520
Minneapolis-Moline G1050 Cockshutt 1465
Minneapolis-Moline G1050 Minneapolis-Moline Jet Star 3 Super
Minneapolis-Moline G1050 Deutz D 9005
Allis Chalmers 8030 Massey Ferguson 1500
Allis Chalmers 8030 Fortschritt ZT 303
Choose another tractor
Useful links and guides ....
- Allis Chalmers provided us with the latest version of its 8030 service repair manual
- Find All mechanical and electrical parts and accessories of Allis Chalmers 8030 farm-tractor here
- Get your Minneapolis-Moline G1050 manual book version
- Cabine, electrical And mechanical parts for Minneapolis-Moline G1050 farm-tractor here
