Allis Chalmers 8010 VS International Harvester 500 specs comparison
Allis Chalmers 8010
General Infos| Make | Allis Chalmers |
| Model | 8010 |
| Country | United states |
| Production | From 1982 Until 1985 |
| Price | 46,176 USD |
| Tractor type | - |
| Fuel | diesel |
| Service repair manual | Allis Chalmers 8010 Manual |
Dimensions, sizes and tires
| AG front tires | 11.00-16 (2WD) |
| AG rear tires | 20.8-38 |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | - |
| Indus rear tires | - |
| Weight | 12,630 lbs or 5728 kg |
| Length | 187 inches [474 cm] |
| Width | 92.6 inches [235 cm] |
| Height | 114 inches [289 cm] |
| Wheelbase | 106 inches [269 cm] (2WD) |
| Ground clearance | 17.5 inches [44 cm] (4WD front axle) |
| Turning radius | - |
| Rear tread size | - |
| Front tread size | - |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 301 ci or 4.9 L |
| Cylinders | 6 cylinders |
| Engine power | - |
| Engine RPM | 2300 (rpm) |
| Torque | - | Torque RPM | - |
| Fuel type | diesel |
| Fuel injection | - |
| Fuel tank size | 60 gal or 227.1 L |
| Oil capacity | 16 qts or 15.1 L |
| Oil change | - |
| Starter motor | - |
| Starter volts | 12 V |
| Parts And Accessories | Allis Chalmers 8010 Parts |
| Batteries number | - |
| Batteries voltage | 12 V |
| Battries Amps | - |
| Cold Amps | - |
| Ground force | - |
| Charging system | alternator |
| Charging Volts | - |
| Charging Amps | 100 amps |
| Trans system | Power Shift |
| Trans type | Allis-Chalmers |
| Trans gears | 12 forward and 2 reverse |
| Clutch system | - |
| Wheel drive | 4x2 2WD |
| Final drive | - |
| Steering | hydrostatic power |
| Braking system | differential hydraulic wet discs |
| Cabin type | Acousta cab standard with heat and air-conditioning |
| Differentiel lock | foot-button |
| System | load-sensitive |
| Valves | 2 or 3 |
| Pump flow | 22 gpm or 83.3 lpm |
| SVC flow | - |
| Steering flow | 9.5 gpm or 36.0 lpm |
| Tank capacity | - |
| Hydraulic pressure | - |
| Max flow | 45 gpm or 170.3 lpm |
| Drawbar type | - |
| Claimed power | - |
| Drawbar horsepower | 91.46 hp or 68.2 kW |
| Fuel consumption | 7.3 gal/hour or 27.6 l/hour |
| Pulling power | 9,102 lbs or 4128 kg |
| Claimed power | - |
| Real power | 109.55 hp or 81.7 kW |
| Engine @RPM | - |
| PTO Clutch | - |
| Rear PTO | independent |
| Rear PTO RPM | 540 (rpm) |
| Front PTO | - |
| Front PTO RPM | - |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | 7.3 gal/hour or 27.6 l/hour |
| Hitch system | - |
| Rear hitch | II |
| Rear hitch lift | 6,680 lbs or 3030 kg |
| Front hitch | - |
| Front hitch lift | - |
International Harvester 500
General Infos| Make | International Harvester |
| Model | 500 |
| Country | United states |
| Production | From 1965 Until 1969 |
| Price | - |
| Tractor type | Agricultural Crawler tractor |
| Fuel | diesel |
| Service repair manual | International Harvester 500 Manual |
Dimensions, sizes and tires
| AG front tires | 10-inch |
| AG rear tires | 10-inch |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | - |
| Indus rear tires | - |
| Weight | 7,050 lbs or 3197 kg |
| Length | 106.5 inches [270 cm] |
| Width | 60 inches [152 cm] |
| Height | - |
| Wheelbase | 67 inches [170 cm] |
| Ground clearance | 13.5 inches [34 cm] |
| Turning radius | - |
| Rear tread size | - |
| Front tread size | - |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 145.3 ci or 2.4 L |
| Cylinders | 4 cylinders |
| Engine power | 38 hp or 28.3 kW |
| Engine RPM | 2000 (rpm) |
| Torque | - | Torque RPM | - |
| Fuel type | diesel |
| Fuel injection | 1-inch carburetor |
| Fuel tank size | 15.9 gal or 60.2 L |
| Oil capacity | 5 qts or 4.7 L |
| Oil change | - |
| Starter motor | electric |
| Starter volts | 12 V |
| Parts And Accessories | International Harvester 500 Parts |
| Batteries number | 1 |
| Batteries voltage | 12 V |
| Battries Amps | 40 amps |
| Cold Amps | - |
| Ground force | - |
| Charging system | generator |
| Charging Volts | - |
| Charging Amps | - |
| Trans system | International Harvester |
| Trans type | unsynchronized gear |
| Trans gears | 5 forward and 1 reverse |
| Clutch system | 10-inch dry disc |
| Wheel drive | crawler |
| Final drive | - |
| Steering | mechanical clutches |
| Braking system | mechanical contracting band |
| Cabin type | Open operator station |
| Differentiel lock | - |
| System | - |
| Valves | 1 to 3 |
| Pump flow | 7 gpm or 26.5 lpm |
| SVC flow | - |
| Steering flow | - |
| Tank capacity | - |
| Hydraulic pressure | - |
| Max flow | - |
| Drawbar type | - |
| Claimed power | - |
| Drawbar horsepower | 30.55 hp or 22.8 kW |
| Fuel consumption | 2.7 gal/hour or 10.2 l/hour |
| Pulling power | 7,957 lbs or 3609 kg |
| Claimed power | 36 hp or 26.8 kW |
| Real power | 36.65 hp or 27.3 kW |
| Engine @RPM | 980@2000 (rpm) |
| PTO Clutch | - |
| Rear PTO | transmission |
| Rear PTO RPM | 1000 (rpm) |
| Front PTO | - |
| Front PTO RPM | - |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | 2.6 gal/hour or 9.8 l/hour |
| Hitch system | - |
| Rear hitch | I |
| Rear hitch lift | - |
| Front hitch | - |
| Front hitch lift | - |
Related tractor comparison
International Harvester 500 Zetor 2011
International Harvester 500 Minneapolis-Moline Jet Star 2
Allis Chalmers 8010 Minneapolis-Moline M-602
International Harvester 500 Minneapolis-Moline U-302
International Harvester 500 Renault 486
International Harvester 500 Volvo T800
Choose another tractor
Useful links and guides ....
- Allis Chalmers provided us with the latest version of its 8010 service repair manual
- Find All mechanical and electrical parts and accessories of Allis Chalmers 8010 farm-tractor here
- Get your International Harvester 500 manual book version
- Cabine, electrical And mechanical parts for International Harvester 500 farm-tractor here
