Allis Chalmers 5040 VS CaseIH Farmall 95 specs comparison

Allis Chalmers 5040
General InfosMake | Allis Chalmers |
Model | 5040 |
Country | United states |
Production | From 1976 Until 1980 |
Price | 9,823 USD |
Tractor type | Utility tractor |
Fuel | diesel |
Service repair manual | Allis Chalmers 5040 Manual |
Dimensions, sizes and tires
AG front tires | 6.00-16 |
AG rear tires | 13.6-28 |
Lawn front tires | - |
Lawn rear tires | - |
Indus front tires | - |
Indus rear tires | - |
Weight | 3850 lbs or 1746 kg |
Length | 116 inches [294 cm] |
Width | 61 inches [154 cm] |
Height | - |
Wheelbase | 74.2 inches [188 cm] |
Ground clearance | - |
Turning radius | - |
Rear tread size | 52 to 75 inches |
Front tread size | 51 to 78 inches |
Turning radius | - |
Horsepower and engin specs
Engine capacity | 142.8 ci or 2.3 L |
Cylinders | 3 cylinders |
Engine power | - |
Engine RPM | 2400 (rpm) |
Torque | - | Torque RPM | - |
Fuel type | diesel |
Fuel injection | direct injection |
Fuel tank size | 14.25 gal or 53.9 L |
Oil capacity | 8.3 qts or 7.9 L |
Oil change | - |
Starter motor | - |
Starter volts | 12 V |
Parts And Accessories | Allis Chalmers 5040 Parts |
Batteries number | - |
Batteries voltage | 12 V |
Battries Amps | - |
Cold Amps | - |
Ground force | - |
Charging system | alternator |
Charging Volts | - |
Charging Amps | 30 amps |
Trans system | partially synchronized |
Trans type | creeper |
Trans gears | 12 forward and 3 reverse |
Clutch system | 279mm dry disc |
Wheel drive | 4x2 2WD |
Final drive | - |
Steering | power |
Braking system | mechanical band |
Cabin type | Open operator station |
Differentiel lock | mechanical rear |
System | open center |
Valves | 1 |
Pump flow | - |
SVC flow | - |
Steering flow | - |
Tank capacity | 4.75 gal or 18.0 L |
Hydraulic pressure | - |
Max flow | 5.75 gpm or 21.8 lpm |
Drawbar type | - |
Claimed power | - |
Drawbar horsepower | - |
Fuel consumption | - |
Pulling power | - |
Claimed power | 40 hp or 29.8 kW |
Real power | - |
Engine @RPM | 540@1970 (rpm) |
PTO Clutch | - |
Rear PTO | continuous |
Rear PTO RPM | 540 (rpm) |
Front PTO | - |
Front PTO RPM | - |
Mid PTO | - |
Mid PTO RPM | - |
Fuel consumption | - |
Hitch system | position control and top-link draft sensing |
Rear hitch | II/I |
Rear hitch lift | 2645 lbs or 1199 kg |
Front hitch | - |
Front hitch lift | - |

CaseIH Farmall 95
General InfosMake | CaseIH |
Model | Farmall 95 |
Country | United states |
Production | From 2008 |
Price | - |
Tractor type | Utility tractor |
Fuel | diesel |
Service repair manual | CaseIH Farmall 95 Manual |
Dimensions, sizes and tires
AG front tires | - |
AG rear tires | - |
Lawn front tires | - |
Lawn rear tires | - |
Indus front tires | - |
Indus rear tires | - |
Weight | 6,107 lbs or 2770 kg |
Length | - |
Width | - |
Height | 103.1 inches [261 cm] |
Wheelbase | 92 inches [233 cm] |
Ground clearance | - |
Turning radius | - |
Rear tread size | - |
Front tread size | - |
Turning radius | - |
Horsepower and engin specs
Engine capacity | 274 ci or 4.5 L |
Cylinders | 4 cylinders |
Engine power | 90 hp or 67.1 kW |
Engine RPM | 2500 (rpm) |
Torque | - | Torque RPM | - |
Fuel type | diesel |
Fuel injection | direct injection |
Fuel tank size | 23.8 gal or 90.1 L |
Oil capacity | - |
Oil change | - |
Starter motor | electric |
Starter volts | 12 V |
Parts And Accessories | CaseIH Farmall 95 Parts |
Batteries number | 1 |
Batteries voltage | 12 V |
Battries Amps | - |
Cold Amps | 800 |
Ground force | negative |
Charging system | alternator |
Charging Volts | - |
Charging Amps | 85 amps |
Trans system | - |
Trans type | mechanical shuttle with creeper |
Trans gears | 20 forward and 12 reverse |
Clutch system | mechanical dry disc |
Wheel drive | 4x2 2WD |
Final drive | - |
Steering | hydrostatic power |
Braking system | hydraulic wet disc |
Cabin type | Flat deck platform with ROPS |
Differentiel lock | mechanical rear lock |
System | open center |
Valves | 1 to 3 |
Pump flow | 13.6 gpm or 51.5 lpm |
SVC flow | - |
Steering flow | 8.1 gpm or 30.7 lpm |
Tank capacity | - |
Hydraulic pressure | 2755 psi or 190.0 bar |
Max flow | 21.7 gpm or 82.1 lpm |
Drawbar type | - |
Claimed power | - |
Drawbar horsepower | 74.4 hp or 55.5 kW |
Fuel consumption | 5.1 gal/hour or 19.3 l/hour |
Pulling power | 7,415 lbs or 3363 kg |
Claimed power | 80 hp or 59.7 kW |
Real power | 80.6 hp or 60.1 kW |
Engine @RPM | - |
PTO Clutch | mechanical dry clutch |
Rear PTO | independent |
Rear PTO RPM | 540 (rpm) |
Front PTO | - |
Front PTO RPM | - |
Mid PTO | - |
Mid PTO RPM | - |
Fuel consumption | 5.2 gal/hour or 19.7 l/hour |
Hitch system | position control and mechanical lower-link draft sensing |
Rear hitch | 2 |
Rear hitch lift | 5,025 lbs or 2279 kg |
Front hitch | - |
Front hitch lift | - |
Related tractor comparison


Allis Chalmers 5040 Kubota KB165


CaseIH Farmall 95 CaseIH JX1095C


CaseIH Farmall 95 Montana T7074


CaseIH Farmall 95 New Holland 7630


Allis Chalmers 5040 McCormick Intl MB65


Allis Chalmers 5040 John Deere 7930
Choose another tractor
Useful links and guides ....
- Allis Chalmers provided us with the latest version of its 5040 service repair manual
- Find All mechanical and electrical parts and accessories of Allis Chalmers 5040 farm-tractor here
- Get your CaseIH Farmall 95 manual book version
- Cabine, electrical And mechanical parts for CaseIH Farmall 95 farm-tractor here