Allis Chalmers 5040 VS CaseIH 9260 specs comparison

Allis Chalmers 5040
General InfosMake | Allis Chalmers |
Model | 5040 |
Country | United states |
Production | From 1976 Until 1980 |
Price | 9,823 USD |
Tractor type | Utility tractor |
Fuel | diesel |
Service repair manual | Allis Chalmers 5040 Manual |
Dimensions, sizes and tires
AG front tires | 6.00-16 |
AG rear tires | 13.6-28 |
Lawn front tires | - |
Lawn rear tires | - |
Indus front tires | - |
Indus rear tires | - |
Weight | 3850 lbs or 1746 kg |
Length | 116 inches [294 cm] |
Width | 61 inches [154 cm] |
Height | - |
Wheelbase | 74.2 inches [188 cm] |
Ground clearance | - |
Turning radius | - |
Rear tread size | 52 to 75 inches |
Front tread size | 51 to 78 inches |
Turning radius | - |
Horsepower and engin specs
Engine capacity | 142.8 ci or 2.3 L |
Cylinders | 3 cylinders |
Engine power | - |
Engine RPM | 2400 (rpm) |
Torque | - | Torque RPM | - |
Fuel type | diesel |
Fuel injection | direct injection |
Fuel tank size | 14.25 gal or 53.9 L |
Oil capacity | 8.3 qts or 7.9 L |
Oil change | - |
Starter motor | - |
Starter volts | 12 V |
Parts And Accessories | Allis Chalmers 5040 Parts |
Batteries number | - |
Batteries voltage | 12 V |
Battries Amps | - |
Cold Amps | - |
Ground force | - |
Charging system | alternator |
Charging Volts | - |
Charging Amps | 30 amps |
Trans system | partially synchronized |
Trans type | creeper |
Trans gears | 12 forward and 3 reverse |
Clutch system | 279mm dry disc |
Wheel drive | 4x2 2WD |
Final drive | - |
Steering | power |
Braking system | mechanical band |
Cabin type | Open operator station |
Differentiel lock | mechanical rear |
System | open center |
Valves | 1 |
Pump flow | - |
SVC flow | - |
Steering flow | - |
Tank capacity | 4.75 gal or 18.0 L |
Hydraulic pressure | - |
Max flow | 5.75 gpm or 21.8 lpm |
Drawbar type | - |
Claimed power | - |
Drawbar horsepower | - |
Fuel consumption | - |
Pulling power | - |
Claimed power | 40 hp or 29.8 kW |
Real power | - |
Engine @RPM | 540@1970 (rpm) |
PTO Clutch | - |
Rear PTO | continuous |
Rear PTO RPM | 540 (rpm) |
Front PTO | - |
Front PTO RPM | - |
Mid PTO | - |
Mid PTO RPM | - |
Fuel consumption | - |
Hitch system | position control and top-link draft sensing |
Rear hitch | II/I |
Rear hitch lift | 2645 lbs or 1199 kg |
Front hitch | - |
Front hitch lift | - |

CaseIH 9260
General InfosMake | CaseIH |
Model | 9260 |
Country | United states |
Production | From 1990 Until 1995 |
Price | 127,000 USD |
Tractor type | Four wheel Drive (4WD) tractor |
Fuel | diesel |
Service repair manual | CaseIH 9260 Manual |
Dimensions, sizes and tires
AG front tires | 20.8-38 |
AG rear tires | 20.8-38 |
Lawn front tires | - |
Lawn rear tires | - |
Indus front tires | - |
Indus rear tires | - |
Weight | 22,000 lbs or 9979 kg |
Length | 250.3 inches [635 cm] |
Width | 151.8 inches [385 cm] |
Height | - |
Wheelbase | 124 inches [314 cm] |
Ground clearance | - |
Turning radius | 12.4 feet [3.8 m] |
Rear tread size | - |
Front tread size | - |
Turning radius | - |
Horsepower and engin specs
Engine capacity | 611 ci or 10.0 L |
Cylinders | 6 cylinders |
Engine power | 300 hp or 223.7 kW |
Engine RPM | 2100 (rpm) |
Torque | 1015 lb-ft or 1376.3 Nm | Torque RPM | 1400 (rpm) |
Fuel type | diesel |
Fuel injection | - |
Fuel tank size | 200 gal or 757.0 L |
Oil capacity | 44 qts or 41.6 L |
Oil change | - |
Starter motor | - |
Starter volts | 12 V |
Parts And Accessories | CaseIH 9260 Parts |
Batteries number | - |
Batteries voltage | 12 V |
Battries Amps | - |
Cold Amps | - |
Ground force | negative |
Charging system | - |
Charging Volts | - |
Charging Amps | - |
Trans system | - |
Trans type | full power shift |
Trans gears | 12 forward and 3 reverse |
Clutch system | hydraulic wet disc |
Wheel drive | 4x4 4WD |
Final drive | - |
Steering | hydrostatic power |
Braking system | - |
Cabin type | Cab standard with air-conditioning |
Differentiel lock | - |
System | closed center load sensing pressure compensating |
Valves | 4 |
Pump flow | - |
SVC flow | - |
Steering flow | - |
Tank capacity | 18 gal or 68.1 L |
Hydraulic pressure | 2500 psi or 172.4 bar |
Max flow | 27 gpm or 102.2 lpm |
Drawbar type | - |
Claimed power | - |
Drawbar horsepower | - |
Fuel consumption | - |
Pulling power | - |
Claimed power | 265 hp or 197.6 kW |
Real power | - |
Engine @RPM | - |
PTO Clutch | - |
Rear PTO | independent |
Rear PTO RPM | 1000 (rpm) |
Front PTO | - |
Front PTO RPM | - |
Mid PTO | - |
Mid PTO RPM | - |
Fuel consumption | - |
Hitch system | optional |
Rear hitch | III |
Rear hitch lift | 12,750 lbs or 5783 kg |
Front hitch | - |
Front hitch lift | - |
Related tractor comparison


CaseIH 9260 Massey Ferguson 3650


Allis Chalmers 5040 Ford-New Holland 3430


CaseIH 9260 John Deere 7600


CaseIH 9260 CaseIH 9250


Allis Chalmers 5040 AGCO Allis 9150


Allis Chalmers 5040 Mitsubishi MTX28
Choose another tractor
Useful links and guides ....
- Allis Chalmers provided us with the latest version of its 5040 service repair manual
- Find All mechanical and electrical parts and accessories of Allis Chalmers 5040 farm-tractor here
- Get your CaseIH 9260 manual book version
- Cabine, electrical And mechanical parts for CaseIH 9260 farm-tractor here