Allis Chalmers 25-40 E VS International Harvester 485 specs comparison
Allis Chalmers 25-40 E
General Infos| Make | Allis Chalmers |
| Model | 25-40 E |
| Country | United states |
| Production | From 1930 Until 1936 |
| Price | - |
| Tractor type | Standard tread tractor |
| Fuel | gasoline |
| Service repair manual | Allis Chalmers 25-40 E Manual |
Dimensions, sizes and tires
| AG front tires | 36x6 steel |
| AG rear tires | 50x12 steel |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | - |
| Indus rear tires | - |
| Weight | 7,000 lbs or 3175 kg |
| Length | 152 inches [386 cm] |
| Width | 76 inches [193 cm] |
| Height | 65 inches [165 cm] |
| Wheelbase | - |
| Ground clearance | - |
| Turning radius | - |
| Rear tread size | - |
| Front tread size | - |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 563 ci or 9.2 L |
| Cylinders | 4 cylinders |
| Engine power | - |
| Engine RPM | 1000 (rpm) |
| Torque | - | Torque RPM | - |
| Fuel type | gasoline |
| Fuel injection | - |
| Fuel tank size | 30 gal or 113.6 L |
| Oil capacity | - |
| Oil change | - |
| Starter motor | - |
| Starter volts | - |
| Parts And Accessories | Allis Chalmers 25-40 E Parts |
| Batteries number | - |
| Batteries voltage | - |
| Battries Amps | - |
| Cold Amps | - |
| Ground force | - |
| Charging system | - |
| Charging Volts | - |
| Charging Amps | - |
| Trans system | - |
| Trans type | gear |
| Trans gears | 2 forward and 1 reverse |
| Clutch system | - |
| Wheel drive | 4x2 2WD |
| Final drive | - |
| Steering | manual |
| Braking system | - |
| Cabin type | Open operator station |
| Differentiel lock | - |
| System | - |
| Valves | - |
| Pump flow | - |
| SVC flow | - |
| Steering flow | - |
| Tank capacity | - |
| Hydraulic pressure | - |
| Max flow | - |
| Drawbar type | - |
| Claimed power | 27 hp or 20.1 kW |
| Drawbar horsepower | 33.82 hp or 25.2 kW |
| Fuel consumption | - |
| Pulling power | 4,133 lbs or 1874 kg |
| Claimed power | - |
| Real power | - |
| Engine @RPM | - |
| PTO Clutch | - |
| Rear PTO | - |
| Rear PTO RPM | - |
| Front PTO | - |
| Front PTO RPM | - |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | - |
| Hitch system | - |
| Rear hitch | - |
| Rear hitch lift | - |
| Front hitch | - |
| Front hitch lift | - |
International Harvester 485
General Infos| Make | International Harvester |
| Model | 485 |
| Country | United states |
| Production | From 1981 Until 1985 |
| Price | - |
| Tractor type | Utility tractor |
| Fuel | diesel |
| Service repair manual | International Harvester 485 Manual |
Dimensions, sizes and tires
| AG front tires | 7.50-16 |
| AG rear tires | 12.4-36 |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | - |
| Indus rear tires | - |
| Weight | 5622 lbs or 2550 kg |
| Length | - |
| Width | - |
| Height | 99.21 inches [251 cm] |
| Wheelbase | 84.65 inches [215 cm] |
| Ground clearance | - |
| Turning radius | - |
| Rear tread size | - |
| Front tread size | - |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 179 ci or 2.9 L |
| Cylinders | 3 cylinders |
| Engine power | 52 hp or 38.8 kW |
| Engine RPM | 2180 (rpm) |
| Torque | 140.4 lb-ft or 190.4 Nm | Torque RPM | 1400 (rpm) |
| Fuel type | diesel |
| Fuel injection | direct injection |
| Fuel tank size | 29.6 gal or 112.0 L |
| Oil capacity | - |
| Oil change | - |
| Starter motor | electric |
| Starter volts | 12 V |
| Parts And Accessories | International Harvester 485 Parts |
| Batteries number | - |
| Batteries voltage | - |
| Battries Amps | - |
| Cold Amps | - |
| Ground force | - |
| Charging system | - |
| Charging Volts | - |
| Charging Amps | - |
| Trans system | Torque Amplifier |
| Trans type | two-speed power shift |
| Trans gears | 16 forward and 8 reverse |
| Clutch system | - |
| Wheel drive | 4x2 2WD |
| Final drive | - |
| Steering | power |
| Braking system | hydraulic wet disc |
| Cabin type | Economy cab standard |
| Differentiel lock | rear standard |
| System | - |
| Valves | - |
| Pump flow | 12.4 gpm or 46.9 lpm |
| SVC flow | - |
| Steering flow | - |
| Tank capacity | - |
| Hydraulic pressure | - |
| Max flow | - |
| Drawbar type | - |
| Claimed power | - |
| Drawbar horsepower | - |
| Fuel consumption | - |
| Pulling power | - |
| Claimed power | 46.5 hp or 34.7 kW |
| Real power | - |
| Engine @RPM | - |
| PTO Clutch | hydraulic wet disc |
| Rear PTO | independent |
| Rear PTO RPM | 540 (rpm) |
| Front PTO | - |
| Front PTO RPM | - |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | - |
| Hitch system | position and draft control |
| Rear hitch | - |
| Rear hitch lift | 3704 lbs or 1680 kg |
| Front hitch | - |
| Front hitch lift | - |
Related tractor comparison
International Harvester 485 Allis Chalmers 7020
Allis Chalmers 25-40 E Volvo 2650
International Harvester 485 Massey Ferguson 294C
International Harvester 485 Ford 4110
International Harvester 485 J.I. Case 4490
International Harvester 485 Valmet 604
Choose another tractor
Useful links and guides ....
- Allis Chalmers provided us with the latest version of its 25-40 E service repair manual
- Find All mechanical and electrical parts and accessories of Allis Chalmers 25-40 E farm-tractor here
- Get your International Harvester 485 manual book version
- Cabine, electrical And mechanical parts for International Harvester 485 farm-tractor here
