Allis Chalmers 160 VS International Harvester 1026 specs comparison
Allis Chalmers 160
General Infos| Make | Allis Chalmers |
| Model | 160 |
| Country | United states |
| Production | From 1970 Until 1975 |
| Price | 6,215 USD |
| Tractor type | Farm/Agricultural tractor |
| Fuel | diesel |
| Service repair manual | Allis Chalmers 160 Manual |
Dimensions, sizes and tires
| AG front tires | 6.00-16 |
| AG rear tires | 13.6-28 |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | - |
| Indus rear tires | - |
| Weight | 4,250 lbs or 1927 kg |
| Length | 144 inches [365 cm] |
| Width | - |
| Height | - |
| Wheelbase | 76 inches [193 cm] |
| Ground clearance | - |
| Turning radius | - |
| Rear tread size | - |
| Front tread size | - |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 152.7 ci or 2.5 L |
| Cylinders | 3 cylinders |
| Engine power | 40 hp or 29.8 kW |
| Engine RPM | 2250 (rpm) |
| Torque | - | Torque RPM | - |
| Fuel type | diesel |
| Fuel injection | - |
| Fuel tank size | 13.5 gal or 51.1 L |
| Oil capacity | 6.5 qts or 6.2 L |
| Oil change | - |
| Starter motor | - |
| Starter volts | 12 V |
| Parts And Accessories | Allis Chalmers 160 Parts |
| Batteries number | 1 |
| Batteries voltage | 12 V |
| Battries Amps | 95 amps |
| Cold Amps | - |
| Ground force | negative |
| Charging system | Delco-Remy |
| Charging Volts | - |
| Charging Amps | - |
| Trans system | - |
| Trans type | partial synchronized |
| Trans gears | 6 forward and 1 reverse |
| Clutch system | - |
| Wheel drive | 4x2 2WD |
| Final drive | - |
| Steering | hydrostatic power |
| Braking system | differential mechanical dry disc |
| Cabin type | - |
| Differentiel lock | - |
| System | - |
| Valves | - |
| Pump flow | 6.7 gpm or 25.4 lpm |
| SVC flow | - |
| Steering flow | 7.5 gpm or 28.4 lpm |
| Tank capacity | 7.25 gal or 27.4 L |
| Hydraulic pressure | 2300 psi or 158.6 bar |
| Max flow | - |
| Drawbar type | - |
| Claimed power | - |
| Drawbar horsepower | 36.71 hp or 27.4 kW |
| Fuel consumption | 2.8 gal/hour or 10.6 l/hour |
| Pulling power | - |
| Claimed power | - |
| Real power | 39.77 hp or 29.7 kW |
| Engine @RPM | - |
| PTO Clutch | - |
| Rear PTO | live |
| Rear PTO RPM | 540 (rpm) |
| Front PTO | - |
| Front PTO RPM | - |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | 2.6 gal/hour or 9.8 l/hour |
| Hitch system | - |
| Rear hitch | II |
| Rear hitch lift | - |
| Front hitch | - |
| Front hitch lift | - |
International Harvester 1026
General Infos| Make | International Harvester |
| Model | 1026 |
| Country | United states |
| Production | From 1970 Until 1971 |
| Price | 11,800 USD |
| Tractor type | Standard tread tractor |
| Fuel | diesel |
| Service repair manual | International Harvester 1026 Manual |
Dimensions, sizes and tires
| AG front tires | 11L-15 |
| AG rear tires | 18.4-38 |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | - |
| Indus rear tires | - |
| Weight | 11,100 lbs or 5034 kg |
| Length | - |
| Width | - |
| Height | - |
| Wheelbase | - |
| Ground clearance | - |
| Turning radius | - |
| Rear tread size | - |
| Front tread size | - |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 406.9 ci or 6.7 L |
| Cylinders | 6 cylinders |
| Engine power | - |
| Engine RPM | 2400 (rpm) |
| Torque | - | Torque RPM | - |
| Fuel type | diesel |
| Fuel injection | - |
| Fuel tank size | - |
| Oil capacity | - |
| Oil change | - |
| Starter motor | - |
| Starter volts | 12 V |
| Parts And Accessories | International Harvester 1026 Parts |
| Batteries number | - |
| Batteries voltage | 12 V |
| Battries Amps | - |
| Cold Amps | - |
| Ground force | - |
| Charging system | - |
| Charging Volts | - |
| Charging Amps | - |
| Trans system | - |
| Trans type | hydrostatic |
| Trans gears | variable forward and reverse |
| Clutch system | - |
| Wheel drive | 4x2 2WD |
| Final drive | - |
| Steering | power |
| Braking system | differential hydraulic dry disc |
| Cabin type | Open operator station |
| Differentiel lock | - |
| System | - |
| Valves | - |
| Pump flow | - |
| SVC flow | - |
| Steering flow | - |
| Tank capacity | - |
| Hydraulic pressure | - |
| Max flow | - |
| Drawbar type | - |
| Claimed power | - |
| Drawbar horsepower | 80.24 hp or 59.8 kW |
| Fuel consumption | 7.8 gal/hour or 29.5 l/hour |
| Pulling power | 9,583 lbs or 4346 kg |
| Claimed power | - |
| Real power | 110.71 hp or 82.6 kW |
| Engine @RPM | - |
| PTO Clutch | - |
| Rear PTO | independent |
| Rear PTO RPM | 540 (rpm) |
| Front PTO | - |
| Front PTO RPM | - |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | 7.1 gal/hour or 26.9 l/hour |
| Hitch system | - |
| Rear hitch | II |
| Rear hitch lift | - |
| Front hitch | - |
| Front hitch lift | - |
Related tractor comparison
International Harvester 1026 Oliver 2150
Allis Chalmers 160 Schluter Super 1500V
International Harvester 1026 Versatile 700
International Harvester 1026 SAME Delfino 35
International Harvester 1026 Allis Chalmers 175
Allis Chalmers 160 Volvo T650
Choose another tractor
Useful links and guides ....
- Allis Chalmers provided us with the latest version of its 160 service repair manual
- Find All mechanical and electrical parts and accessories of Allis Chalmers 160 farm-tractor here
- Get your International Harvester 1026 manual book version
- Cabine, electrical And mechanical parts for International Harvester 1026 farm-tractor here