AGCO DT250B VS New Holland Workmaster 75 specs comparison
AGCO DT250B
General Infos| Make | AGCO |
| Model | DT250B |
| Country | United states |
| Production | From 2009 Until 2010 |
| Price | - |
| Tractor type | Row Crop tractor |
| Fuel | diesel |
| Service repair manual | AGCO DT250B Manual |
Dimensions, sizes and tires
| AG front tires | 480/70R34 |
| AG rear tires | 520/85R46 |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | - |
| Indus rear tires | - |
| Weight | 24,250 lbs or 10999 kg |
| Length | 215.7 inches [547 cm] |
| Width | - |
| Height | 141 inches [358 cm] |
| Wheelbase | 122.2 inches [310 cm] |
| Ground clearance | - |
| Turning radius | - |
| Rear tread size | - |
| Front tread size | - |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 512.6 ci or 8.4 L |
| Cylinders | 6 cylinders |
| Engine power | 290 hp or 216.3 kW |
| Engine RPM | 2200 (rpm) |
| Torque | 1033 lb-ft or 1400.7 Nm | Torque RPM | 1500 (rpm) |
| Fuel type | diesel |
| Fuel injection | high-pressure common rail |
| Fuel tank size | 155.9 gal or 590.1 L |
| Oil capacity | - |
| Oil change | - |
| Starter motor | electric |
| Starter volts | 12 V |
| Parts And Accessories | AGCO DT250B Parts |
| Batteries number | - |
| Batteries voltage | 12 V |
| Battries Amps | - |
| Cold Amps | - |
| Ground force | negative |
| Charging system | alternator |
| Charging Volts | - |
| Charging Amps | 240 amps |
| Trans system | PowerMaxx CVT |
| Trans type | continuously variable transmission |
| Trans gears | infinite forward and reverse |
| Clutch system | - |
| Wheel drive | 4x4 MFWD 4WD |
| Final drive | inboard planetary |
| Steering | hydrostatic power |
| Braking system | hydraulic wet disc |
| Cabin type | Cab standard with heat and air-conditioning |
| Differentiel lock | full locking electro-hydraulic front and rear |
| System | closed center load sensing |
| Valves | 4 to 6 |
| Pump flow | - |
| SVC flow | 26.4 gpm or 99.9 lpm |
| Steering flow | - |
| Tank capacity | - |
| Hydraulic pressure | 2,901 psi or 200.0 bar |
| Max flow | 46.2 gpm or 174.9 lpm |
| Drawbar type | Category 3 standard |
| Claimed power | - |
| Drawbar horsepower | 213.6 hp or 159.3 kW |
| Fuel consumption | 15.7 gal/hour or 59.4 l/hour |
| Pulling power | 30,335 lbs or 13759 kg |
| Claimed power | 250 hp or 186.4 kW |
| Real power | 275.8 hp or 205.7 kW |
| Engine @RPM | 1000@1970 (rpm) |
| PTO Clutch | electro-hydraulic |
| Rear PTO | independent |
| Rear PTO RPM | 1000E (rpm) |
| Front PTO | optional |
| Front PTO RPM | 1000 (rpm) |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | 15.9 gal/hour or 60.2 l/hour |
| Hitch system | - |
| Rear hitch | 3 |
| Rear hitch lift | 26,460 lbs or 12002 kg |
| Front hitch | 3 |
| Front hitch lift | 11,020 lbs or 4998 kg |
New Holland Workmaster 75
General Infos| Make | New Holland |
| Model | Workmaster 75 |
| Country | United states |
| Production | From 2010 Until 2014 |
| Price | - |
| Tractor type | Utility tractor |
| Fuel | diesel |
| Service repair manual | New Holland Workmaster 75 Manual |
Dimensions, sizes and tires
| AG front tires | 11.2x24 |
| AG rear tires | 16.9x30 |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | - |
| Indus rear tires | - |
| Weight | 5,059 lbs or 2294 kg |
| Length | 137.2 inches [348 cm] |
| Width | 78.4 inches [199 cm] |
| Height | 95.3 inches [242 cm] |
| Wheelbase | - |
| Ground clearance | - |
| Turning radius | - |
| Rear tread size | 59.7 to 80.2 inches |
| Front tread size | 59.6 to 79.6 inches |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 195 ci or 3.2 L |
| Cylinders | 4 cylinders |
| Engine power | 75 hp or 55.9 kW |
| Engine RPM | 2500 (rpm) |
| Torque | - | Torque RPM | - |
| Fuel type | diesel |
| Fuel injection | - |
| Fuel tank size | 16 gal or 60.6 L |
| Oil capacity | - |
| Oil change | - |
| Starter motor | electric |
| Starter volts | 12 V |
| Parts And Accessories | New Holland Workmaster 75 Parts |
| Batteries number | - |
| Batteries voltage | 12 V |
| Battries Amps | - |
| Cold Amps | 800 |
| Ground force | negative |
| Charging system | alternator |
| Charging Volts | 12 V |
| Charging Amps | 65 amps |
| Trans system | - |
| Trans type | partially synchronized |
| Trans gears | 8 forward and 2 reverse |
| Clutch system | 11-inch dry organic plate |
| Wheel drive | 4x4 MFWD 4WD |
| Final drive | - |
| Steering | hydrostatic power |
| Braking system | differential mechanical wet disc |
| Cabin type | Two-post foldable ROPS |
| Differentiel lock | mechanical rear lock engaged by foot pedal |
| System | open center fixed displacement |
| Valves | 1 or 2 |
| Pump flow | 10.4 gpm or 39.4 lpm |
| SVC flow | - |
| Steering flow | 8.3 gpm or 31.4 lpm |
| Tank capacity | - |
| Hydraulic pressure | - |
| Max flow | 18.7 gpm or 70.8 lpm |
| Drawbar type | - |
| Claimed power | - |
| Drawbar horsepower | - |
| Fuel consumption | - |
| Pulling power | - |
| Claimed power | 65 hp or 48.5 kW |
| Real power | 66.69 hp or 49.7 kW |
| Engine @RPM | - |
| PTO Clutch | - |
| Rear PTO | independent |
| Rear PTO RPM | 540 (rpm) |
| Front PTO | - |
| Front PTO RPM | - |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | 4.0 gal/hour or 15.1 l/hour |
| Hitch system | position control and mechanical draft sensing |
| Rear hitch | 2/1 |
| Rear hitch lift | 3,276 lbs or 1485 kg |
| Front hitch | - |
| Front hitch lift | - |
Related tractor comparison
New Holland Workmaster 75 Zetor Proxima 85
AGCO DT250B Chery RM704
New Holland Workmaster 75 McCormick Intl X60.50
AGCO DT250B Kubota JB15X
New Holland Workmaster 75 Kubota M5040
AGCO DT250B Challenger MT475B
Choose another tractor
Useful links and guides ....
- AGCO provided us with the latest version of its DT250B service repair manual
- Find All mechanical and electrical parts and accessories of AGCO DT250B farm-tractor here
- Get your New Holland Workmaster 75 manual book version
- Cabine, electrical And mechanical parts for New Holland Workmaster 75 farm-tractor here
