AGCO Allis 7600 VS New Holland Workmaster 75 specs comparison
AGCO Allis 7600
General Infos| Make | AGCO Allis |
| Model | 7600 |
| Country | United states |
| Production | From 1991 Until 1996 |
| Price | - |
| Tractor type | Row Crop tractor |
| Fuel | diesel |
| Service repair manual | AGCO Allis 7600 Manual |
Dimensions, sizes and tires
| AG front tires | 10.00-16 |
| AG rear tires | 16.9R34 |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | - |
| Indus rear tires | - |
| Weight | 8179 lbs or 3709 kg |
| Length | 171.2 inches [434 cm] |
| Width | 84 inches [213 cm] |
| Height | - |
| Wheelbase | 104 inches [264 cm] |
| Ground clearance | 18.4 inches [46 cm] |
| Turning radius | - |
| Rear tread size | 61 to 85.2 inches |
| Front tread size | 60 to 80 inches |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 317 ci or 5.2 L |
| Cylinders | 5 cylinders |
| Engine power | 95.2 hp or 71.0 kW |
| Engine RPM | 2180 (rpm) |
| Torque | - | Torque RPM | - |
| Fuel type | diesel |
| Fuel injection | direct injection |
| Fuel tank size | 31.7 gal or 120.0 L |
| Oil capacity | 14.3 qts or 13.5 L |
| Oil change | - |
| Starter motor | electric |
| Starter volts | 12 V |
| Parts And Accessories | AGCO Allis 7600 Parts |
| Batteries number | - |
| Batteries voltage | 12 V |
| Battries Amps | 120 amps |
| Cold Amps | - |
| Ground force | negative |
| Charging system | alternator |
| Charging Volts | - |
| Charging Amps | 65 amps |
| Trans system | - |
| Trans type | synchromesh |
| Trans gears | 24 forward and 12 reverse |
| Clutch system | hydraulic dry 350mm disc |
| Wheel drive | 4x2 2WD |
| Final drive | inboard planetary |
| Steering | power |
| Braking system | hydraulic wet disc |
| Cabin type | Four-post ROPS |
| Differentiel lock | mechanical |
| System | open center |
| Valves | 2 |
| Pump flow | 16.9 gpm or 64.0 lpm |
| SVC flow | - |
| Steering flow | - |
| Tank capacity | 23.1 gal or 87.4 L |
| Hydraulic pressure | 2610 psi or 180.0 bar |
| Max flow | - |
| Drawbar type | - |
| Claimed power | - |
| Drawbar horsepower | - |
| Fuel consumption | - |
| Pulling power | - |
| Claimed power | 89.25 hp or 66.6 kW |
| Real power | - |
| Engine @RPM | 540@1957 (rpm) |
| PTO Clutch | hydraulic wet disc |
| Rear PTO | independent |
| Rear PTO RPM | 540 (rpm) |
| Front PTO | - |
| Front PTO RPM | - |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | - |
| Hitch system | lower link draft control |
| Rear hitch | II/I |
| Rear hitch lift | 10141 lbs or 4599 kg |
| Front hitch | - |
| Front hitch lift | - |
New Holland Workmaster 75
General Infos| Make | New Holland |
| Model | Workmaster 75 |
| Country | United states |
| Production | From 2010 Until 2014 |
| Price | - |
| Tractor type | Utility tractor |
| Fuel | diesel |
| Service repair manual | New Holland Workmaster 75 Manual |
Dimensions, sizes and tires
| AG front tires | 11.2x24 |
| AG rear tires | 16.9x30 |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | - |
| Indus rear tires | - |
| Weight | 5,059 lbs or 2294 kg |
| Length | 137.2 inches [348 cm] |
| Width | 78.4 inches [199 cm] |
| Height | 95.3 inches [242 cm] |
| Wheelbase | - |
| Ground clearance | - |
| Turning radius | - |
| Rear tread size | 59.7 to 80.2 inches |
| Front tread size | 59.6 to 79.6 inches |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 195 ci or 3.2 L |
| Cylinders | 4 cylinders |
| Engine power | 75 hp or 55.9 kW |
| Engine RPM | 2500 (rpm) |
| Torque | - | Torque RPM | - |
| Fuel type | diesel |
| Fuel injection | - |
| Fuel tank size | 16 gal or 60.6 L |
| Oil capacity | - |
| Oil change | - |
| Starter motor | electric |
| Starter volts | 12 V |
| Parts And Accessories | New Holland Workmaster 75 Parts |
| Batteries number | - |
| Batteries voltage | 12 V |
| Battries Amps | - |
| Cold Amps | 800 |
| Ground force | negative |
| Charging system | alternator |
| Charging Volts | 12 V |
| Charging Amps | 65 amps |
| Trans system | - |
| Trans type | partially synchronized |
| Trans gears | 8 forward and 2 reverse |
| Clutch system | 11-inch dry organic plate |
| Wheel drive | 4x4 MFWD 4WD |
| Final drive | - |
| Steering | hydrostatic power |
| Braking system | differential mechanical wet disc |
| Cabin type | Two-post foldable ROPS |
| Differentiel lock | mechanical rear lock engaged by foot pedal |
| System | open center fixed displacement |
| Valves | 1 or 2 |
| Pump flow | 10.4 gpm or 39.4 lpm |
| SVC flow | - |
| Steering flow | 8.3 gpm or 31.4 lpm |
| Tank capacity | - |
| Hydraulic pressure | - |
| Max flow | 18.7 gpm or 70.8 lpm |
| Drawbar type | - |
| Claimed power | - |
| Drawbar horsepower | - |
| Fuel consumption | - |
| Pulling power | - |
| Claimed power | 65 hp or 48.5 kW |
| Real power | 66.69 hp or 49.7 kW |
| Engine @RPM | - |
| PTO Clutch | - |
| Rear PTO | independent |
| Rear PTO RPM | 540 (rpm) |
| Front PTO | - |
| Front PTO RPM | - |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | 4.0 gal/hour or 15.1 l/hour |
| Hitch system | position control and mechanical draft sensing |
| Rear hitch | 2/1 |
| Rear hitch lift | 3,276 lbs or 1485 kg |
| Front hitch | - |
| Front hitch lift | - |
Related tractor comparison
New Holland Workmaster 75 Massey Ferguson 435 Xtra
New Holland Workmaster 75 Kubota MZ755
New Holland Workmaster 75 Kioti RX6010
New Holland Workmaster 75 CaseIH Farmall 85C
AGCO Allis 7600 Massey Ferguson GC2400
AGCO Allis 7600 John Deere 8285R
Choose another tractor
Useful links and guides ....
- AGCO Allis provided us with the latest version of its 7600 service repair manual
- Find All mechanical and electrical parts and accessories of AGCO Allis 7600 farm-tractor here
- Get your New Holland Workmaster 75 manual book version
- Cabine, electrical And mechanical parts for New Holland Workmaster 75 farm-tractor here
