AGCO Allis 7600 VS Lanz 700 specs comparison
AGCO Allis 7600
General Infos| Make | AGCO Allis |
| Model | 7600 |
| Country | United states |
| Production | From 1991 Until 1996 |
| Price | - |
| Tractor type | Row Crop tractor |
| Fuel | diesel |
| Service repair manual | AGCO Allis 7600 Manual |
Dimensions, sizes and tires
| AG front tires | 10.00-16 |
| AG rear tires | 16.9R34 |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | - |
| Indus rear tires | - |
| Weight | 8179 lbs or 3709 kg |
| Length | 171.2 inches [434 cm] |
| Width | 84 inches [213 cm] |
| Height | - |
| Wheelbase | 104 inches [264 cm] |
| Ground clearance | 18.4 inches [46 cm] |
| Turning radius | - |
| Rear tread size | 61 to 85.2 inches |
| Front tread size | 60 to 80 inches |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 317 ci or 5.2 L |
| Cylinders | 5 cylinders |
| Engine power | 95.2 hp or 71.0 kW |
| Engine RPM | 2180 (rpm) |
| Torque | - | Torque RPM | - |
| Fuel type | diesel |
| Fuel injection | direct injection |
| Fuel tank size | 31.7 gal or 120.0 L |
| Oil capacity | 14.3 qts or 13.5 L |
| Oil change | - |
| Starter motor | electric |
| Starter volts | 12 V |
| Parts And Accessories | AGCO Allis 7600 Parts |
| Batteries number | - |
| Batteries voltage | 12 V |
| Battries Amps | 120 amps |
| Cold Amps | - |
| Ground force | negative |
| Charging system | alternator |
| Charging Volts | - |
| Charging Amps | 65 amps |
| Trans system | - |
| Trans type | synchromesh |
| Trans gears | 24 forward and 12 reverse |
| Clutch system | hydraulic dry 350mm disc |
| Wheel drive | 4x2 2WD |
| Final drive | inboard planetary |
| Steering | power |
| Braking system | hydraulic wet disc |
| Cabin type | Four-post ROPS |
| Differentiel lock | mechanical |
| System | open center |
| Valves | 2 |
| Pump flow | 16.9 gpm or 64.0 lpm |
| SVC flow | - |
| Steering flow | - |
| Tank capacity | 23.1 gal or 87.4 L |
| Hydraulic pressure | 2610 psi or 180.0 bar |
| Max flow | - |
| Drawbar type | - |
| Claimed power | - |
| Drawbar horsepower | - |
| Fuel consumption | - |
| Pulling power | - |
| Claimed power | 89.25 hp or 66.6 kW |
| Real power | - |
| Engine @RPM | 540@1957 (rpm) |
| PTO Clutch | hydraulic wet disc |
| Rear PTO | independent |
| Rear PTO RPM | 540 (rpm) |
| Front PTO | - |
| Front PTO RPM | - |
| Mid PTO | - |
| Mid PTO RPM | - |
| Fuel consumption | - |
| Hitch system | lower link draft control |
| Rear hitch | II/I |
| Rear hitch lift | 10141 lbs or 4599 kg |
| Front hitch | - |
| Front hitch lift | - |
Lanz 700
General Infos| Make | Lanz |
| Model | 700 |
| Country | Germany |
| Production | From 1962 Until 1966 |
| Price | - |
| Tractor type | - |
| Fuel | diesel |
| Service repair manual | Lanz 700 Manual |
Dimensions, sizes and tires
| AG front tires | 6.00-16 |
| AG rear tires | 11-32 |
| Lawn front tires | - |
| Lawn rear tires | - |
| Indus front tires | - |
| Indus rear tires | - |
| Weight | 4775 lbs or 2165 kg |
| Length | 133.5 inches [339 cm] |
| Width | 65 inches [165 cm] |
| Height | - |
| Wheelbase | 76.8 inches [195 cm] |
| Ground clearance | - |
| Turning radius | - |
| Rear tread size | 53.2 to 59.1 inches |
| Front tread size | 49.2 to 72.8 inches |
| Turning radius | - |
Horsepower and engin specs
| Engine capacity | 165.1 ci or 2.7 L |
| Cylinders | 4 cylinders |
| Engine power | 53 hp or 39.5 kW |
| Engine RPM | 2400 (rpm) |
| Torque | - | Torque RPM | - |
| Fuel type | diesel |
| Fuel injection | - |
| Fuel tank size | 18.5 gal or 70.0 L |
| Oil capacity | 5.8 qts or 5.5 L |
| Oil change | - |
| Starter motor | - |
| Starter volts | 12 V |
| Parts And Accessories | Lanz 700 Parts |
| Batteries number | - |
| Batteries voltage | 12 V |
| Battries Amps | - |
| Cold Amps | - |
| Ground force | - |
| Charging system | - |
| Charging Volts | - |
| Charging Amps | - |
| Trans system | - |
| Trans type | constant mesh |
| Trans gears | 10 forward and 3 reverse |
| Clutch system | - |
| Wheel drive | 4x2 2WD |
| Final drive | - |
| Steering | manual |
| Braking system | disc |
| Cabin type | Open operator station |
| Differentiel lock | - |
| System | open center |
| Valves | - |
| Pump flow | 4.2 gpm or 15.9 lpm |
| SVC flow | - |
| Steering flow | - |
| Tank capacity | - |
| Hydraulic pressure | 2200 psi or 151.7 bar |
| Max flow | - |
| Drawbar type | - |
| Claimed power | - |
| Drawbar horsepower | - |
| Fuel consumption | - |
| Pulling power | - |
| Claimed power | - |
| Real power | - |
| Engine @RPM | 540@2250 (rpm) |
| PTO Clutch | - |
| Rear PTO | - |
| Rear PTO RPM | 540 (rpm) |
| Front PTO | - |
| Front PTO RPM | - |
| Mid PTO | standard |
| Mid PTO RPM | 1000 (rpm) |
| Fuel consumption | - |
| Hitch system | - |
| Rear hitch | II |
| Rear hitch lift | 1764 lbs or 800 kg |
| Front hitch | - |
| Front hitch lift | - |
Related tractor comparison
Lanz 700 Ford 6000
AGCO Allis 7600 International Harvester 706
AGCO Allis 7600 J.I. Case 630
Lanz 700 J.I. Case 830
Lanz 700 IMT 533
AGCO Allis 7600 Fendt F230GT
Choose another tractor
Useful links and guides ....
- AGCO Allis provided us with the latest version of its 7600 service repair manual
- Find All mechanical and electrical parts and accessories of AGCO Allis 7600 farm-tractor here
- Get your Lanz 700 manual book version
- Cabine, electrical And mechanical parts for Lanz 700 farm-tractor here