AGCO Allis 6680 VS Steiger Panther III ST-325 specs comparison

AGCO Allis 6680 1991 comparison online with competitors

AGCO Allis 6680

General Infos
Make AGCO Allis
Model 6680
Country United states
Production From 1991  Until 1997
Price 40,000  USD
Tractor type Utility tractor
Fuel diesel
Service repair manual AGCO Allis 6680 Manual

Dimensions, sizes and tires
AG front tires 7.50-18
AG rear tires 16.9R3
Lawn front tires -
Lawn rear tires -
Indus front tires -
Indus rear tires -
Weight 6,724 lbs or 3050 kg
Length 161 inches [408 cm]
Width 82.4 inches [209 cm]
Height 111.2 inches [282 cm]
Wheelbase 92.8 inches [235 cm]
Ground clearance 17.6 inches [44 cm]
Turning radius -
Rear tread size -
Front tread size -
Turning radius -

Horsepower and engin specs
Engine capacity 244 ci or 4.0 L
Cylinders 4 cylinders
Engine power 79.27 hp or 59.1 kW
Engine RPM 2500 (rpm)
Torque -
Torque RPM -
Fuel type diesel
Fuel injection -
Fuel tank size 28.27 gal or 107.0 L
Oil capacity 9.7 qts or 9.2 L
Oil change -
Starter motor -
Starter volts 12 V
Parts And Accessories AGCO Allis 6680 Parts
Electrical and battery specs
Batteries number 1
Batteries voltage 12 V
Battries Amps 100 amps
Cold Amps -
Ground force negative
Charging system alternator
Charging Volts -
Charging Amps 55 amps
Clutch and gearbox specs
Trans system -
Trans type partial power shift
Trans gears 30 forward and reverse
Clutch system 305mm dry disc
Cabine and mechanical specs
Wheel drive 4x2 2WD
Final drive -
Steering hydrostatic power
Braking system hydraulic wet disc
Cabin type Cab standard with air-conditioning
Differentiel lock mechanical foot-actuated rear
Hydraulics specifications
System open center
Valves 2
Pump flow 11.1 gpm or 42.0 lpm
SVC flow -
Steering flow -
Tank capacity 15.2 gal or 57.5 L
Hydraulic pressure 2610 psi or 180.0 bar
Max flow -
Drawbar specifications
Drawbar type -
Claimed power -
Drawbar horsepower 62.09 hp or 46.3 kW
Fuel consumption -
Pulling power -
Power take-off (PTO) specs
Claimed power 72.7 hp or 54.2 kW
Real power 72.7 hp or 54.2 kW
Engine @RPM 540@2200 (rpm)
PTO Clutch 124.5mm hydraulic wet disc
Rear PTO independent
Rear PTO RPM 540 (rpm)
Front PTO -
Front PTO RPM -
Mid PTO -
Mid PTO RPM -
Fuel consumption 4.4 gal/hour or 16.7 l/hour
3 point hitch specifiations
Hitch system position and draft control with lower-link sensing
Rear hitch II/I
Rear hitch lift 6,790 lbs or 3079 kg
Front hitch -
Front hitch lift -

Steiger Panther III ST-325 1976 comparison online with competitors

Steiger Panther III ST-325

General Infos
Make Steiger
Model Panther III ST-325
Country United states
Production From 1976  Until 1983
Price 103,000  USD
Tractor type Four wheel Drive (4WD) tractor
Fuel diesel
Service repair manual Steiger Panther III ST-325 Manual

Dimensions, sizes and tires
AG front tires 23.1-34
AG rear tires 23.1-34
Lawn front tires -
Lawn rear tires -
Indus front tires -
Indus rear tires -
Weight 26,900 lbs or 12201 kg
Length 252 inches [640 cm]
Width 96 inches [243 cm] (tractor body)
Height -
Wheelbase 128 inches [325 cm]
Ground clearance -
Turning radius -
Rear tread size -
Front tread size -
Turning radius -

Horsepower and engin specs
Engine capacity 893 ci or 14.6 L
Cylinders 6 cylinders
Engine power 325 hp or 242.4 kW
Engine RPM 2100 (rpm)
Torque 1015 lb-ft or 1376.3 Nm
Torque RPM 1200 (rpm)
Fuel type diesel
Fuel injection -
Fuel tank size 267 gal or 1010.6 L
Oil capacity 36 qts or 34.1 L
Oil change -
Starter motor -
Starter volts 12 V
Parts And Accessories Steiger Panther III ST-325 Parts
Electrical and battery specs
Batteries number 2
Batteries voltage 12 V
Battries Amps 208 amps
Cold Amps -
Ground force negative
Charging system alternator
Charging Volts -
Charging Amps 90 amps
Clutch and gearbox specs
Trans system Dana-Spicer 1010-3B
Trans type -
Trans gears 20 forward and 4 reverse
Clutch system 393.7mm dry disc
Cabine and mechanical specs
Wheel drive 4x4 articulated 4WD
Final drive outboard planetary
Steering hydrostatic power
Braking system hydraulic disc
Cabin type Safari Cab standard with heat and air-conditioning
Differentiel lock -
Hydraulics specifications
System open center
Valves 3 to 5
Pump flow 31.9 gpm or 120.7 lpm
SVC flow -
Steering flow -
Tank capacity -
Hydraulic pressure 2250 psi or 155.1 bar
Max flow -
Drawbar specifications
Drawbar type -
Claimed power -
Drawbar horsepower 269.86 hp or 201.2 kW
Fuel consumption 18.2 gal/hour or 68.9 l/hour
Pulling power 28,189 lbs or 12786 kg
Power take-off (PTO) specs
Claimed power -
Real power -
Engine @RPM -
PTO Clutch -
Rear PTO -
Rear PTO RPM -
Front PTO -
Front PTO RPM -
Mid PTO -
Mid PTO RPM -
Fuel consumption -
3 point hitch specifiations
Hitch system -
Rear hitch 3
Rear hitch lift -
Front hitch -
Front hitch lift -

Related tractor comparison


1976 Steiger Panther III ST-325 competitors and comparison tool online specs and performance
1978 Landini 7550 competitors and comparison tool online specs and performance

Steiger Panther III ST-325 Landini 7550

1991 AGCO Allis 6680 competitors and comparison tool online specs and performance
1977 Long 360 competitors and comparison tool online specs and performance

AGCO Allis 6680 Long 360

1976 Steiger Panther III ST-325 competitors and comparison tool online specs and performance
1978 John Deere 4240 competitors and comparison tool online specs and performance

Steiger Panther III ST-325 John Deere 4240

1991 AGCO Allis 6680 competitors and comparison tool online specs and performance
1974 Ursus 1204 competitors and comparison tool online specs and performance

AGCO Allis 6680 Ursus 1204

1991 AGCO Allis 6680 competitors and comparison tool online specs and performance
1977 Hinomoto E25 competitors and comparison tool online specs and performance

AGCO Allis 6680 Hinomoto E25

1991 AGCO Allis 6680 competitors and comparison tool online specs and performance
1978 Deutz-Fahr DX 110 competitors and comparison tool online specs and performance

AGCO Allis 6680 Deutz-Fahr DX 110


Choose another tractor









Useful links and guides ....